Makita 9565PCV 5 Inch/125mm Angle Grinder 1400W is high powered & ideal for prolonged use in demanding applications. Comes complete with lock nut & wrench, inner flange, AVT side grip & wheel guard Powerful 13.0 AMP motor delivers more output & variable (2, 800
- 10, 500) RPMThe Makita 9565PCV features SJS technology which is a mechanical clutch system that helps prevent motor & gear damage by allowing the drive shaft to slip if the wheel is forced to stop. On the rear of the machine is a variable speed control dial giving much more control & enabling the user to match the speed to the application. Constant speed control automatically applies additional power to the motor to maintain speed under load. Soft start suppresses start-up reaction for smooth start-ups & longer gear life. Electronic current limiter helps protect the motor from overload. Labyrinth construction seals & protects the motor & bearings from dust & debris for longer tool life. Slide switch with lock-on setting for continuous product use. " Tool-less" wheel guard adjustment for easy adjustment. Zig-zag varnish protects the armature coil from dust & debris for longer tool life

Features: High power 1400w anti-dust motor Ideal for prolonged use in demading applications Variable speed trigger Soft start Constant speed under load Double insulated for added safety Comes with: Lock Nut Lock Nut Wrench Inner Flange AVT Side Grip Wheel Guard


...

Makita 9565PCV 5 Inch/125mm Angle Grinder 1400W is high powered & ideal for prolonged use in demanding applications. Comes complete with lock nut & wrench, inner flange, AVT side grip & wheel guard Powerful 13.0 AMP motor delivers more output & variable (2, 800
- 10, 500) RPMThe Makita 9565PCV features SJS technology which is a mechanical clutch system that helps prevent motor & gear damage by allowing the drive shaft to slip if the wheel is forced to stop. On the rear of the machine is a variable speed control dial giving much more control & enabling the user to match the speed to the application. Constant speed control automatically applies additional power to the motor to maintain speed under load. Soft start suppresses start-up reaction for smooth start-ups & longer gear life. Electronic current limiter helps protect the motor from overload. Labyrinth construction seals & protects the motor & bearings from dust & debris for longer tool life. Slide switch with lock-on setting for continuous product use. " Tool-less" wheel guard adjustment for easy adjustment. Zig-zag varnish protects the armature coil from dust & debris for longer tool life

Features: High power 1400w anti-dust motor Ideal for prolonged use in demading applications Variable speed trigger Soft start Constant speed under load Double insulated for added safety Comes with: Lock Nut Lock Nut Wrench Inner Flange AVT Side Grip Wheel Guard Wheel

Size: 125mm Bore

Size: 22mm No Load Speed: 2800-11000rpm Input Wattage: 1400w Spindle

Size: M14 x 2mm Net Weight: 1.8 Kgs








...

Makita 988.001.611 Chainsaw / Hobby Safety Kit, Size-Large An affordable professional chainsaw safety kit containing a quality padded & lined bib & braces in green (EN381), safety helmet in high vis orange (EN397) & grey leather protective gloves with nylon high vis backs (EN381). Weight: 2kg ...

Makita 98C339 Pop-Up Spring Bucket

Features: Ideal for the collection & disposal of garden waste such as hedge

...

Makita 98C359 Abrasive Sanding Discs 125mm Velcro Backed (Pack of 30)

Features: Ideal for paint, wood & steel

...

Makita Makpac Connector Case Type 1 with 1 x BL1830 Battery & DC18RC Charger This Type 1 Connector Case comes with a Makita 3.0 Ah Battery, a Makita DC18RC Charger & a 8379481 Moulded Inlay which has storage space for a further three batteries. The connector case system is designed for the professional with strong & collapsible carry handles making these connector cases easy to move & store. ...

Makita 98C428 DC18RC Charger with 3 x 3.0 Ah Batteries in Makpac Carry Case 3 Makita 3.0 Ah BL1830 Batteries with a DC18RC Charger in a Makpac Type 1 Connector Case (821549-5). Also comes with a 8379481 Moulded Inlay which has storage space for one further battery. Model DC18RC is a compact size fast charger. Only 22 minutes to fully charge a 3.0 Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger & battery. The internal cooling fan keeps the battery temperature low for minimum charging time. MAKPAC. The connector case system designed for the professional. Strong & collapsible carry handles make the connector cases easy to move & store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other & locked together with the locking latches. DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Makpac

Features: Stackable for storage & easy transportation Strong & collaspible handles Four different sizes to choose from BL1830

Features: Charging at any time will have no effect on the battery Built-in shock absorbing features protect the battery Sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments Battery's built-in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal)     Connector Case (Type 1) Length: 396 mm

Width: 296 mm

Height: 105 mm DC18RC Compatible with Batteries: BL1840 (196399-0) 4 Ah
- 36 Minutes BL1830 (194204-5) 3 Ah
- 22 Minutes BL1430 (194065-3) 3 Ah
- 22 Minutes BL1415 (194558-0) 1.3 Ah
- 15 Minutes













...

Makita 98C428 DC18RC Charger with 3 x 3.0 Ah Batteries in Makpac Carry Case 3 Makita 3.0 Ah BL1830 Batteries with a DC18RC Charger in a Makpac Type 1 Connector Case (821549-5). Also comes with a 8379481 Moulded Inlay which has storage space for one further battery. Model DC18RC is a compact size fast charger. Only 22 minutes to fully charge a 3.0 Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger & battery. The internal cooling fan keeps the battery temperature low for minimum charging time. MAKPAC. The connector case system designed for the professional. Strong & collapsible carry handles make the connector cases easy to move & store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other & locked together with the locking latches. DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Makpac

Features: Stackable for storage & easy transportation Strong & collaspible handles Four different sizes to choose from BL1830

Features: Charging at any time will have no effect on the battery Built-in shock absorbing features protect the battery Sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments Battery's built-in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal) Connector Case (Type 1) Length: 396 mm

Width: 296 mm

Height: 105 mm DC18RC Compatible with Batteries: BL1840 (196399-0) 4 Ah
- 36 Minutes BL1830 (194204-5) 3 Ah
- 22 Minutes BL1430 (194065-3) 3 Ah
- 22 Minutes BL1415 (194558-0) 1.3 Ah
- 15 Minutes













...

Makita 98CK450 Lockable Toolcase for DHR202 Rotary Hammer This tool case from Makita in strong moulded plastic is designed to house a Makita DHR202 Rotary Hammer. This well made smart case has 2 lockable metal clasps & comes with 2 keys. There is also enough storage space to store a battery, drill kit & charger. Supplied as an empty case.

Features: Solid construction Lockable for security 2 keys Weight: 2kg

...

Makita 98CK451 Aluminium Style Carry Case for BHP456 with 27 Piece Drill/ Bit Set Perfect if you need to replace your carry case or if you've got drill & drivers without a carry case. The Makita 98CK451 Aluminium Style Case comes with a Makita 27 Piece Drill/ Bit Set. It is a heavy duty carry case with storage space for a drill, 3 batteries & a charger. It is lockable & comes with 2 keys. Other Combi, Drill/ Drivers or Impact Drivers which fit the case are: BHP456, BDF456, DHP456, BHP452, DHP480, BTD146, BTD129 & DTD129 + more. 27 Piece Drill/ Bit Set HSS Metal/ Wood: 2, 3, 4, 5, 6, 7mm. Masonry: 5, 5.5, 6, 7mm. Screwdriver Bits 25mm: PZ1, PZ2, PZ2, PZ3, Ph 1, PH2, PH3, 4, 5.5, 7. Screwdriver Bits 50mm: 3, 4, 5, T15, T20, T25. Magnetic Bit Holder Weight: 1.8kgs ...