Makita 18V Battery Triple Pack 2.0 Ah This e Xclusive Toolstop Deal consists of a Triple Pack of the Makita Battery BL1820 (632B42-4) 18 Volt 2 Ah Lithium-Ion. Provides more run time & a fastest-charge time for compact cordless power. Up to 50% more run time than the Makita 18V Lithium-Ion 1.5 Ah battery (BL1815). Reaches a full charge in only 25 minutes
- up to 40% faster than other 18V Compact 2.0 Ah batteries. In side-by-side internal testing, an 18V Compact Driver-Drill powered by the new 2.0 Ah battery drilled 32 holes, compared to 21 holes by the 1.5 Ah battery-powered drill (application: 1-1/8" self-feed into 2x 10 SPF). Fully compatible with 18V LXT
...

Makita 18V Battery Triple Pack 3.0 Ah This e Xclusive Toolstop Deal consists of a Triple Pack of the Makita BL1830 (194204-5) 18 Volt 3.0 Ah LXT Lithium-Ion Battery.

Features: LXT Lithium-Ion battery & optimum charging system produces 280% total lifetime work with 2x more cycles 5x Lower self-discharge keeps battery cells active & ready for use, even after long periods of storage Charging at any time will have no effect on the battery Built-in shock absorbing features protect the battery Sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments Battery's built-in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal) Battery suitable for all Makita li-ion LXT 18 volt machines. PLEASE NOTE
- when new, these batteries require about 6 to 8 full charges to reach their optimum performance [https://www.youtube.com/watch?v=F6_osl 3 Ta 4g] Battery Ah: 3.0 Ah Battery Type: Li-ion Voltage: 18V Weight: 0.6kg


...

Makita 18V Battery Triple Pack 4.0 Ah This e Xclusive Toolstop Deal consists of a Triple Pack of the Makita BL1840B (1967265-4) 18 Volt 4.0 Ah Lithium-Ion Battery. It has a charge level indicator with four bars to show how much power is left. The Li-ion range delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime.

Features: Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 36 minute charge time Same weight & size as 3.0 Ah battery Works with your current Li-ion Chargers Longer run time & battery life Compatible 18V li-ion machines which have the following markings:   See our blog post for more details on compatibility PLEASE NOTE
- when new, these batteries require about 6 to 8 full charges to reach their optimum performance



...

Makita 18V Cordless 7 Piece Kit (3 x 4.0 Ah Batteries) This Toolstop e Xclusive deal offers you 7 Cordless tools comprising of: Combi Drill, Jigsaw, Angle Grinder, SDS+ Rotary Hammer, Impact Driver, Oscillating Multicutter & Fluorescent Light / Torch. Also

Includes:: 3 x BL1840B 4.0 Ah Batteries, DC18RC Charger & a Large Makita 831279-0 Wheeled Duffel Toolbag for storage & transportation. DHP453 Combi Drill: 2 Mechanical gears Metal gearing Electronic brake control Forward/reverse Variable speed trigger Double end Ph Bit DJV180 Jigsaw: Ergonomically rubberised handle provides comfortable gripping & more control while minimising hand fatigue & pain The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on 3 orbital settings + straight cut Blower will clear the pencil line of dust Lightweight & compact Tool-less blade change
- push in lock system enables very fast blade changes LED light will illuminate your cut line Smooth & powerful cutting at the high stroke speed at 2, 600 spm Double insulated Soft start DGA452 Angle Grinder: Makita built produces 50% faster grinding with an impressive 10, 000 RPM More compact design at only 12-1/2" long & weighs only 5.6 lbs. for less operator fatigue Ergonomic shape fits like a glove with even pressure & easy control Built-in electronic control circuit with L.E.D. warning lights for overload protection Slide switch with lock-on Powerful angle grinder now free from the restriction of cables & power sockets Capable of using wheels or discs for mains grinders Easy-to-grip, small circumference motor housing Anti-restart function Electronic current limiter DHR202 SDS+ Rotary Hammer: 3-Mode Switch for rotation only, hammering with rotation, or hammering only 2x faster drilling with synchronized RPM & BPM for more efficient drilling Built-in torque limiter clutch disengages if bit jams when hitting rebar More compact design at only 330mm long & weighs only 3.2kg for less operator fatigue One touch sliding chuck
- for easy bit changes Ergonomic shape fits like a glove with even pressure & easy control
- rubberised handle has anti slip dimples Electric brake Forward/reverse rotation Job light with afterglow function
- illuminates job in poor lighting conditions Rotary hammer action Rotary only action Variable speed trigger DTD146 Impact Driver: Very compact with overall length of only 138mm Weights only 1.5kg One touch bit installation Phosphorescent bumper Enhanced dust & drip-proof performance Battery level indicator Compact & lightweight, 4-pole motor LED Job light with afterglow Forward/reverse rotation Variable speed trigger Electronic brake DTM50 Oscillating Multicutter: Hex wrench holder on body Variable speed control dial Accessories can be installed at 30





...

Makita 194079-2 Quick Change Chuck 1.5
- 13mm The Makita 194079-2 Keyless Chuck fit the following Drills: BHR261T, HR2310T, HR2450FT,
...

Makita 194385-5 Clamp Set for SP6000 Plunge Saw (Pair) 2 Clamps of metal construction with rubber handles which fit 194368-5 guide rails. Adjustable along the length of the guide rail based on the width of the material to be cut.

Features: Secures guide rails to material Slides into channels located on underside of guide rail Prevents guide rails from shifting when placed on smooth materials

...

Makita 194943-7 Mitre Saw Work Station with 5 height levels (660mm
- 840mm)
Features:5 level quick height adjustment

...

Makita 195283-6 Suction Kit For BHX2500 / BHX2501 Blower Suction kit to convert the Makita BHX2500 or BHX2501 Blower into a powerful vacuum suitable for leaf & grass collection. Comes With: Elbow vacuum pipe hose clip collection bag shoulder strap Weight: 3kg ...

Makita 195866-2 Dust Extractor Attachment Set For Hammers The Makita Dust Extractor Attachment Set for SDS-MAX drills immediately removes fine & hazardous airborne dust particles from the working enviroment. It can be used for drilling & chiseling. Improves visibility in the workplace which also means much less cleaning up afterwards. Fits Makita Models: HR4002, HR4001C, HR4010C, HR4011C, HR4501C, HR4510C, HR4511C.

Features: x 2 Bellows for Drilling mode Dust Caps for Hammer Mode Bellow Connectors Integrated structure with side grip Depth Gauge Depth Gauge Extension Outlet attachment for hose Velcro strap for hose control Comes with: Compact Makita Carry Case [https://www.youtube.com/watch?v=SJMzk D6kfv Q] Fits Makita Models: HR4002, HR4001C, HR4010C, HR4011C, HR4501C, HR4510C, HR4511C. Weight: 0.5kg

...

Makita 196817-8 Makpac Shoulder Strap The Makita 196817-8 Makpac Shoulder Strap is compatible with any Makita Makpac case. Made from tough nylon weave strap with adjustable buckles & a padded section for comfort.

Features: Universal fit for all Makpac cases Adjustable

...