More From Contributor

£13.00
Irwin Record TM140 Corner Clamp 50mm

Features:
The open design of the clamp makes it possible to nail & glue

...
Archived Product
£33.00
Irwin Record TSP4 Smoothing Plane 2 Inch IRWIN Record bring decades of experience & well proven design in this fine woodworking plane. Smoothing planes are the most frequently purchased planes used for final finishing work & also ideal for general work. The Record SP4 is a well designed & constructed smoothing plane with a tungsten vanadium cutter. It is competitively priced & features a screw adjustment for depth of cut & lever for lateral adjustment.

Features:
Smoothing plane Manufactured to uncompromisingly high standards suitable for both hard & soft woods Supplied with a tungsten vanadium cutter blade Screw adjustment for depth of cut & lever for lateral adjustment Pre-packed on a strong display card. Type: Smooth Length: 9.3/4in Cutter: 2in Net Weight: 1.983kg

...
Archived Product
£26.00
Irwin Record TSP5 Jack Plane IRWIN Record bring decades of experience & well proven design in this fine woodworking plane. Jack planes are used for the preliminary squaring of rough timber, & are the general workhorses for stock removal. The Irwin Record SP5 is a well constructed Jack Plane with tungsten vanadium cutter. It is competitively priced & has a screw adjustment for depth of cut & also a lever for lateral adjustment.

Features:
Manufactured to uncompromisingly high standards Suitable for both hard & soft woods Supplied with 2 inch tungsten vanadium cutter blades Designed for the initial preparation of rough timber the long base bridging undulations which a shorter plane would tend to follow Screw adjustment for depth of cut & lever for lateral adjustment Cutter: 2in
- 50mm Type: Jack Length: 14in
- 355mm Net Weight: 2.64kg



...
Archived Product
£31.95
Irwin Record TV175B Woodcraft Vice 175mm (7in) Boxed

Features:
Designed for the user who requires a more robust

...
Archived Product
£6.00
Irwin T10765 Folding Hex Key Set 7pc 2.0
- 8.0mm A retractable set of Irwin Hex keys housed in a high resistance poliamide & fibreglass
...
Archived Product
£15.00
Irwin TM444S5 Blue Chip Bevel Edge Chisel
- Set of 5 The Irwin Blue Chip Chisels have high impact square section blue plastic handles,
...
Archived Product
£49.00
Idealgas 23260 Propane Heating Torch Double Head 600mm 260k W The 23260 Propane Heating Torch from Idealgas has a double head mounted on a 600mm neck attached to a regulation trigger. The torch is for use with Propane gas to heat roofing materials or could be used to burn weeds & unwanted vegetation without chemicals. Also great for melting snow, thawing metal pipes & heating motors.

Features:
Regulation trigger Neck 600mm long Turbo burner 60mm x 2 5m rubber hose PVC 3/8 3/8 Turbo burner 60mm + inject 1.50mm power 75KW (lab Test 3 bar) Individually tested on gas tap before assembling

...
Archived Product
£38.00
Idealgas B22160 Propane Heating Torch Single Head 600mm 260k W The B22160 Propane Heating Torch from Idealgas has a single head mounted on a 600mm neck attached to a regulation trigger. The torch is for use with Propane gas to heat roofing materials or could be used to burn weeds & unwanted vegetation without chemicals. Also great for melting snow, thawing metal pipes & heating motors.

Features:
Regulation trigger Neck 600mm long Turbo burner 60mm 5m rubber hose PVC 3/8 3/8 Turbo burner 60mm + inject 1.50mm power 75KW (lab Test 3 bar) Individually tested on gas tap before assembling Gas Torch: Single Head Power: Max 500.000 BTu 260k W Hose: ISO 3821 & DIN338 Weight: 2.2kg

...
Archived Product
£129.00
Imex LX22 Cross Line Plumb Red Laser Level
- with Magnetic Bracket A breakthrough in Laser EDGE Technology, the brightest Line
...
Archived Product
£149.00
Imex LX22S Cross Line Plumb Red Laser Level Kit with Magnetic Bracket & Tri-Pod A breakthrough in Laser EDGE Technology, the brightest Line Laser has arrived featuring up & down plumb spot. Imex International has developed new technology in laser diodes to create extremely clear & precise laser lines. Traditionally line lasers will have a thin laser line when close by & then, the further away the line travels the wider the laser line gets. This is not good as the laser line becomes more & more inaccurate. The LX22 has a great laser line that can be easily seen up to 40M away inside, & has sharp clear, thin lines all the way. The Imex cross-liner & plumb spot, self
- levelling laser has 1 sharp vertical line & 1 horizontal line & a plumb up & down spot. Featuring an excellent magnetic rotating bracket & a pulsating mode for outdoor use with optional detector (not supplied) up to 50m. This is the most efficient cross line laser available giving accurate results every time. It is the ultimate palm laser. You can also turn the self-levelling function off & create a laser line wherever needed. This Cross Line Laser level can be fitted to a clamp mount (not supplied) so you can attach it to a variety of surfaces. The standard tripod threading on the rotating bracket makes it highly usable in a variety of situations. The tool has a locking pendulum, which is both a very important safety feature to protect the integrity of the laser level & a useful feature for projecting lines out of level when needed. The Imex LX22 Cross line Laser level has one of the best 2 Year Warranties & can be used in a variety of situations without issue. It has a IP rating of IP54 & is powered by 4 x AA Batteries which are included.

Features:
Up & down plumb spot Ultra bright laser beams Robust moulded housing 2 Year Warranty IP54 water debris resistant Full time pulse mode allows use with a detector Laser EDGE technology 1 Vertical, 1 Horizontal beam Self levelling Magnetic pivoting base bracket Lock mode for fixed angles Ideal For: Shop fitting & cabinet installation Wall & floor tiling Wall Partitions Electrical switch & light placement Steel fabrication alignment & set out Interior decorating Window & door placement Comes with: Tripod Magnetic rotating bracket Target 4 x AA Batteries Carry bag Light Source diode: 635nm Red diodes Output Laser: Class II Accuracy: +/-3mm @ 15m Beams: 1 Horizontal 2 Vertical plumb spot up & down Damping type: Self Levelling
- Magnetic Hours of continuous product use Approximately: 10 hours
- all lasers Working distance: 30m 55m with detector Dimensions: 65 x 95 x 85mm Batteries: 4 x AA Included Weight: 0.6kg




...
Archived Product

Irwin TM444/S6 M444 Blue Chip Bevel Edge Chisel - Set Of 6

Irwin TM444/S6 M444 Precision Blue Chip Bevel Edge Chisel - Set of 6 The Irwin Blue Chip Chisels have high impact square section blue plastic handles, radiused for a comfortable grip. Bolster fitted blades are manufactured from top quality carbon steel, hardened and tempered along the full length of the blade. Features: Irwin Blue Chip Chisels have high impact square section blue plastic handle radiused for a comfortable grip Bolster fitted blades are manufactured from top quality carbon steel Hardened and tempered along the full length of the blade Bevel edged Set contains 6 chisels:- 1/4, 3/8, 1/2, 3/4, 1 and 1.1/4inch   Set contents as detailed Net Weight: 1.851kg
RIP - This product is no longer available on our network. It was last seen on 29.10.2016

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: MARP-TM444-slash-S6
Availability: In Stock
£35.00

Product Description

Irwin TM444/S6 M444 Precision Blue Chip Bevel Edge Chisel
- Set of 6 The Irwin Blue Chip Chisels have high impact square section blue plastic handles, radiused for a comfortable grip. Bolster fitted blades are manufactured from finest top quality carbon steel, hardened & tempered along the full length of the blade.

Features:
Irwin Blue Chip Chisels have high impact square section blue plastic handle radiused for a comfortable grip Bolster fitted blades are manufactured from finest top quality carbon steel Hardened & tempered along the full length of the blade Bevel edged Set contains 6 chisels:- 1/4, 3/8, 1/2, 3/4, 1 & 1.1/4inch   Set contents as detailed Net Weight: 1.851kg

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
Blades - Part of a tool or machine which has a cutting edge
Plastic - A generic term for a synthetic product used in the manufacture of products
Blue - A primary colour
Carbon - A common element, in its simplest form is coal. The element can take different form from hard diamonds through graphite to soft carbon
blade - A flat part of a device which usually has a cutting edge
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu