Hitachi CJ18DSL/W4 18V li-ion Cordless Jigsaw (Body Only) The Hitachi CJ18DSL Jigsaw is a versatile machine with lots of handy features to help achieve a professional finish. With a tiltable baseplate & a no load speed of 2400 revs per minute, the 18 volt machine gives a cutting capacity in wood of 135mm & 10mm in mild steel. It is compact with an overall length of 277mm so it's at home in tight spaces. Sold as a body only machine without battery or charger in a cardboard carton.

Features: Compatible with the range of Hitachi 18V slide Li-Ion batteries from 1.5 Ah to 6.0 Ah Adjustable base tilts up to 45

...

Hitachi CJ90VST Jigsaw 705W

Features: Variable speed by dial lets you select the right speed for the type of

...

Hitachi CJ90VST Jigsaw 705W

Features: Variable speed by dial lets you select the right speed for the type of

...

Hitachi CJ90VST Jigsaw 705W

Features: Variable speed by dial lets you select the right speed for the type of

...

Hitachi CJ90VST Jigsaw 705W

Features: Variable speed by dial lets you select the right speed for the type of

...

Hitachi CL18DSL Cordless Stud Cutter With Charger & Kitbox (2 x 5.0 Ah Batteries) The Hitachi CL18DSL Stud Cutter cuts quickly & quietly with no sparks or chips & does minimal damage to the work piece. High speed cutting of studs with up to 660 per charge (M10). It Uses lightweight 5.0 Ah Li-Ion batteries & is equipped with a battery level indicator. This machine comes with the M8 Cutter. Other cutters/trimmers are optional extras from Hitachi.

Features: High speed cutting of studs
- up to 660 per charge (M10) Cuts quickly & quietly with no sparks or chips Minimal damage to the workpiece Multi-edged blades prolong operating life Convenient stud mounting hole enables rapid cutting of uniform lengths Comes With: 2 x BSL1850 1 x UC18YFSL Carry Case No Load Speed: 0-30/min Capacity (Mild Steel Studs): M10 x 1.5, M8 x 1.25, M6 x 1, 3/8in x 1.5875 Length: 277mm Stud Size & Material Max Cuts per Charge: M10 Mild Steel: 660 M8 Mild Steel: 1020 M6 Mild Steel: 1520 W3/8in Mild Steel: 740


...

Hitachi CM75EAP Petrol Cutter 2 Stroke 12 Inch / 305mm comes with Abrasive Cut Off Wheel 402327 & free Diamond Wheel 773000 Powerful & Tough with an output of 3.9k W. The Hitachi Pure Fire, Low emission Petrol Disc Cutter meets European standards for emission control. They are environmentally friendly healthy & suitable for prolonged use. A dust-resistant recoil starter with anti-abrasive starter rope is long-lasting even in work environments with large amounts of dust & debris. It is easy to start with less force required due to a Decompression System. Increased power & better fuel efficiency are achieved by pressure waves reflected in a branch of the muffler which push the outgoing fresh mixture flow back to the cylinder. This increases charge efficiency & power, & reduces fuel consumption. & emission levels are significantly reduced by preventing fresh mixture from being exhausted. A compensator keeps the mixing ratio between air & fuel (air-fuel ratio) constant. It prevents the air-fuel ratio from varying due to a clogged air filter & delivers stable power.

Features: Exhaust Pulsation Muffler increases power & reduces fuel consumption Compensator delivers stable power Max Power Output 3.9k W Dust-resistant Recoil Starter with Decompression System Metal Lower Guard & Foot Plate to protect the main unit from cut materials & the like Toolless Detachable Pre-filter Cleaner Box makes it easy to clean the pre-filter Convenient Tool Holder stores standard wrenches on the machine. Comes With: Abrasive Cut-off Wheel 402327 Diamond Wheel 773000 Adapter Collar Combi Box Spanner Hex Wrench Protective Glasses   Displacement: 75.0m L (cc) Max Power output: 3.9k W Fuel Tank Capacity 1100ml Wheel Type: Type 41 Outer Diameter: 305mm (12") Spindle Max Speed: 4200/min Vibration Level (m/s 2) by ISO 19432 Front handle: 2.2 m/s 2 Rear handle: 2.7 m/s 2 Uncertainty: 1.0 m/s 2 Weight: 10.4kg  

...

Hitachi CM75EAP Petrol Cutter 2 Stroke 12 Inch / 305mm comes with Abrasive Cut Off Wheel 402327 Powerful & Tough with an output of 3.9k W. The Hitachi Pure Fire, Low emission Petrol Disc Cutter meets European standards for emission control. They are environmentally friendly healthy & suitable for prolonged use. A dust-resistant recoil starter with anti-abrasive starter rope is long-lasting even in work environments with large amounts of dust & debris. It is easy to start with less force required due to a Decompression System. Increased power & better fuel efficiency are achieved by pressure waves reflected in a branch of the muffler which push the outgoing fresh mixture flow back to the cylinder. This increases charge efficiency & power, & reduces fuel consumption. & emission levels are significantly reduced by preventing fresh mixture from being exhausted. A compensator keeps the mixing ratio between air & fuel (air-fuel ratio) constant. It prevents the air-fuel ratio from varying due to a clogged air filter & delivers stable power.

Features: Exhaust Pulsation Muffler increases power & reduces fuel consumption Compensator delivers stable power Max Power Output 3.9k W Dust-resistant Recoil Starter with Decompression System Metal Lower Guard & Foot Plate to protect the main unit from cut materials & the like Toolless Detachable Pre-filter Cleaner Box makes it easy to clean the pre-filter Convenient Tool Holder stores standard wrenches on the machine. Comes With: Abrasive Cut-off Wheel 402327 Adapter Collar Combi Box Spanner Hex Wrench Protective Glasses Displacement: 75.0m L (cc) Max Power output: 3.9k W Fuel Tank Capacity 1100ml Wheel Type: Type 41 Outer Diameter: 305mm (12") Spindle Max Speed: 4200/min Vibration Level (m/s 2) by ISO 19432 Front handle: 2.2 m/s 2 Rear handle: 2.7 m/s 2 Uncertainty: 1.0 m/s 2 Weight: 10.4kg  

...

Hitachi CN18DSL/JP 18V Cordless Nibbler with Stackable Carry Case, Multi-Voltage Charger & 2 x 5.0 Ah Batteries Designed to make fast, accurate cuts in a variety of metal sheets, the new cordless CN18DSL/JP 18V nibbler has been launched from Hitachi Power Tools. Slicing through up to 1.8m of steel per minute & cutting up to 20m per charge when cutting 1.6mm thick mild steel with BSL1850 5.0 Ah battery. The CN18DSL/JP 18V nibbler has three cutting positions & a slimline grip, making it comfortable for the user & easy to make tight & precise cuts. Hitachi Power Tools understands that there is little more infuriating than running out of charge mid-job, so a handy battery indicator light is fitted as standard. The tool also comes with two 5.0 Ah Lithium-Ion (Li-Ion) batteries with a charge time of just 75 minutes
- so you need never run out of power on the job. The CN18DSL/JP 18V nibbler also comes with two wrenches, battery charger & a carry case. As with many of its tougher, faster & more advanced power tools, Hitachi's three-year warranty is available when the tool is registered online within four weeks of purchase, so trade professionals can be assured of long service & peace of mind.

Features: Cuts up to 20m of steel per charge when cutting 1.6mm thick mild steel with BSL1850 (5.0 Ah) Cuts up to 1.8m/min* Slimline grip Three adjustable cutting positions Remaining battery life indicator Comes With: 3 Year Warranty (registration required within 4 weeks of purchase) 2 x BSL1850 5.0 Ah Li-Ion batteries UC18YFSL charger 2 wrenches Stackable carry case Capacity: Mild Steel: 1.6mm (16ga), stainless steel: 1.2mm (18ga), aluminium: 2.3mm (13ga) Charge Time: 75 mins Cutting Speed: 1.8m/min Min Cutting Radius: 40mm No-Load Speed: 2500/min Overall Length: 295mm Weight 2.1kg (inc BSL1850)


...

Hitachi CR13V2 Reciprocating Saw with tool-free blade change & variable speed trigger CR13V2

Features: Tool

...