Irwin Record T300/24 Stillson Pipe Wrench 24"/600mm

Features: Steel handle, jaw & adjusting nut Jaw drop-forged

...

Irwin Record T300/8 Stillson Pipe Wrench 8"/200mm

Features: Steel handle, jaw & adjusting nut Jaw drop-forged

...

Irwin Record T4 No.4 Mechanics Vice Jaw Width 4.5 Inch / 115mm Rigid & robust, the body & sliding jaw are cast from close grained grey iron which is machined on all fricton surfaces for a smooth reliable action. The jaws, handle & main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed to fully open with a minimum of winding. 4.5" (115mm) without Swivel Base.

Features: Safety Stop prevents the slide from being seperated from the body High quality grey iron castings resist distortion under severe pressure Smooth action provided by dovetailed, long barrelled, unbreakable nut Hardened steel replaceable jaw plates Fused Steel Handle will bend before the vice can be overstressed. 115mm jaw width Jaw

Width: 115mm (4 1/2 in) Net Weight: 19kg



...

Irwin Record T5 No.5 Mechanics Vice Jaw Width 5 Inch / 125mm Rigid & robust, the body & sliding jaw are cast from close grained grey iron which is machined on all fricton surfaces for a smooth reliable action. The jaws, handle & main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed to fully open with a minimum of winding. 5" (125mm) without Swivel Base.

Features: Safety Stop prevents the slide from being seperated from the body High quality grey iron castings resist distortion under severe pressure Smooth action provided by dovetailed, long barrelled, unbreakable nut Hardened steel replaceable jaw plates Fused Steel Handle will bend before the vice can be overstressed. 125mm jaw width Jaw

Width: 125mm (5 in) Net Weight: 23.7kg



...

Irwin Record T5212ED Woodworking Vice Quick Release 9 Inch / 230mm Squeeze the trigger, & this quick release vice can be opened & closed without using the mainscrew. Large & small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room. For clamping & holding wood work pieces.

Features: Two steel guide rods to reduce wear & ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the workpiece Adjustable dog used in conjunction with bench stops fitted into the bench top Location Holes are provided so you can fit your own chioce of wooden cheeks to protect the work piece Quick release lever Weight: 16.6kg

...

Irwin Record T53ED Woodworking Vice Quick Release 10.5 Inch / 270mm Squeeze the trigger, & this quick release vice can be opened & closed without using the mainscrew. Large & small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room. For clamping & holding wood work pieces.

Features: Two steel guide rods to reduce wear & ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the workpiece Adjustable dog used in conjunction with bench stops fitted into the bench top Location Holes are provided so you can fit your own chioce of wooden cheeks to protect the work piece Quick release lever Jaw

Width: 270mm (10 1/2 in) Jaw opening: 380mm (15 in) Net Weight: 18.6kg



...

Irwin Record T6 No 6 Mechanics Vice Jaw Width 6 Inch / 150mm Rigid & robust, the body & sliding jaw are cast from close grained grey iron which is machined on all fricton surfaces for a smooth reliable action. The jaws, handle & main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed to fully open with a minimum of winding. 6" (150mm) without Swivel Base.

Features: Safety Stop prevents the slide from being seperated from the body High quality grey iron castings resist distortion under severe pressure Smooth action provided by dovetailed, long barrelled, unbreakable nut Hardened steel replaceable jaw plates Fused Steel Handle will bend before the vice can be overstressed. 150mm jaw width   Jaw Width Opening: 6 Inches / 150mm Weight: 32kgs

...

Irwin Record T778 Rebate Plane Rebate planes are generally used to form grooved joints in woodworking. The Record 778 rebate plane has two cutter positions, one for normal rebating work & a forward position for planing into corners & difficult positions.

Features: Two cutter positions One for normal rebating work & a forward position for planing into corners & difficult positions The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate The cast iron body has an accurately ground base Five thread depth adjusting screws for precision control of shaving thickness Length: 215mm (8.1/2in) Cutter

Width: 38mm (1.1/2in) Net Weight: 1.582kg



...

Irwin Record T914H Arm Adjusted High Tensile Bolt Cutter 355mm (14in) Irwin Record bolt cutters made their debut in 1923. A bolt cutter consists of two drop-forged steel handles, which open & close the jaws through a compound action. This action means that every pound of force applied to the handles is amplified to produce 80lbs of force between the jaws. The jaws are dropforged from a special steel & machined to precise specifications. This produces a resilient body & rigid cutting edge.

Features: High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in 2) Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh & wire, high tensile steel rods, bolts & case hardened chain, cold drawn alloy steel & tempered sprung wire

...

Irwin Record T918H Arm Adjusted High Tensile Bolt Cutter 460mm (18in) Irwin Record bolt cutters made their debut in 1923. A bolt cutter consists of two drop-forged steel handles, which open & close the jaws through a compound action. This action means that every pound of force applied to the handles is amplified to produce 80lbs of force between the jaws. The jaws are dropforged from a special steel & machined to precise specifications. This produces a resilient body & rigid cutting edge.

Features: High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in 2) Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh & wire, high tensile steel rods, bolts & case hardened chain, cold drawn alloy steel & tempered sprung wire Overall Length: 18in Max Cutting Capacity: 1/4in/6.4mm Net Weight: 1.991kg

...