More From Contributor

£84.00
Makita DTM50Z 18 Volt Lithium ion Cordless Oscillating Multicutter
- Body Only Powerful & versatile tool with 3.2° oscillation
...
Archived Product
£129.00
Makita DTM50Z Oscillating Multicutter (Body Only) + Makita 831279-0 Duffel Toolbag This e Xclusive Toolstop Deal consists of the DTM50Z LXT 18V Li-Ion Cordless Oscillating Multicutter (Body Only) & the Makita 831279-0 Duffel Toolbag for Power Tools. The DTM50 is a powerful & versatile tool with 3.2 ...
Archived Product
£239.00
Makita DTM51 Multi-tool with DC18RC Charger in Makpac Case with Dust Extraction & Accessories (2 x 3.0 Ah Batteries) This e Xclusive Toolstop deal consists of the DTM51 Multi-tool, DC18RC single charger & 2 BL1830B 3.0 Ah Batteries all stored in a Makpac Connector Case Type 3. With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework. Change the blade for the sanding plate & you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). DTM51

Features:
Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories BL1830B

Features:
Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge DC18RC

Features:
The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper  





...
Archived Product
£115.00
Makita DTM51Z 18V LXT Multi Tool (Body Only In Carton) With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework.

Features:
Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Soft start Ergonomic barrel grip
- Perfect size & shape for extra comfort High operating efficiency Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories


...
Archived Product
£339.00
Makita DTM51ZJX7 Multi-tool with Accessories in Makpac Connector Case Type 3 + DC18RD Twin Charger (2 x 5.0 Ah Batteries) This e Xclusive Toolstop deal consists of the Makita DTM51 Cordless 18V Multi-Tool with up to 20, 000 oscillations per minute, 2 x Makita BL1850B Batteries, DC18RD Twin Charger capable of charging two Makita 18V batteries at the same time & a Makpac Carry Case. Also included is a Delta Backing Pad, 20 various grit sanding sheets & a blade for cutting wood & metal. DTM51 Multi-Tool: Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories BL1850B

Features:
Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 45 minute charge time Same weight & size as 3 Ah or 4 Ah battery Works with your current Li-ion Chargers Longer run time & battery life Compatible 18V li-ion machines which have the following markings: DC18RD Charging Times Two 3.0 Ah BL1830 batteries
- 22 minutes Two 4.0 Ah BL1840 batteries
- 36 minutes Two 5.0 Ah BL1850 batteries
- 45 minutes Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper





...
Archived Product
£449.00
Makita DTW1001RTJ Impact Wrench 18V Brushless LXT Li-ion 3/4 Inch Square Drive with 2 x 5.0 Ah Batteries, Charger & Makpac Type 3 Connector Case The DTW1001 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1050 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button.

Features:
Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: 2 x BL1850 5.0 Ah batteries DC18RC charger Makpac type 3 connector case [https://www.youtube.com/watch?v=z Et 9-_f SDT4] Battery Type: Li-ion Voltage: 18V Driving Shank: 3/4" (19mm) Square Impact Power Selection Hard / Med / Soft Impacts per min: 0
- 2, 200ipm / 2, 000ipm / 1, 800ipm No Load Speed: 0
- 1, 800rpm / 1, 000rpm / 900rpm Max Tightening Torque: 1050 Nm Nut Busting Torque: 1700 Nm Standard Bolt: M12-M30 High Strength Bolt: M10-M24 Sound Pressure: 98 d B (A) Sound Power: 109 d B (A) Sound K Factor: 3 d B (A) Vibration: 15.5 m/s 2 Vibration K Factor: 2 m/s Net Weight: 3.7kg



...
Archived Product
£235.00
Makita DTW1001Z Impact Wrench 18V Brushless LXT Li-ion 3/4 Inch Square Drive (Body Only) The DTW1001 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1050 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Sold without battery or charger.

Features:
Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: Belt clip [https://www.youtube.com/watch?v=z Et 9-_f SDT4] Battery Type: Li-ion Voltage: 18V Driving Shank: 3/4" (19mm) Square Impact Power Selection Hard / Med / Soft Impacts per min: 0
- 2, 200ipm / 2, 000ipm / 1, 800ipm No Load Speed: 0
- 1, 800rpm / 1, 000rpm / 900rpm Max Tightening Torque: 1050 Nm Nut Busting Torque: 1700 Nm Standard Bolt: M12-M30 High Strength Bolt: M10-M24 Sound Pressure: 98 d B (A) Sound Power: 109 d B (A) Sound K Factor: 3 d B (A) Vibration: 15.5 m/s 2 Vibration K Factor: 2 m/s Net Weight: 3.7kg



...
Archived Product
£459.00
Makita DTW1002RTJ Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive with 2 x 5.0 Ah Batteries, Charger & Makpac Type 3 Connector Case The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button.

Features:
Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: 2 x BL1850B 5.0 Ah batteries with state of charge LED's DC18RC charger Makpac type 3 connector case

...
Archived Product
£228.00
Makita DTW1002Z Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive (Body Only) The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Sold without battery or charger.

Features:
Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: Belt clip

...
Archived Product
£209.95
Makita DTW190RMJ Impact Wrench 18V Cordless with 2 x 4.0 Ah Batteries, DC18RC Charger & Makpac Carry Case Model DTW190 is an entry level 18V cordless impact wrench with a 1/2 inch square drive & an optimal tightening torque of 190 N.m. Equipped with battery protection circuit which is designed to protect the battery from damages due to overdischarge, high temperature or overload current. It is fitted with an LED Joblight with pre-glow function, when you pull on the trigger switch the light comes on before the motor starts.

Features:
Electric brake Variable speed control trigger Forward/reverse rotation Battery protection circuit Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control & comfort

...
Archived Product

Makita DTM51ZJX7 Multi-tool Cordless 18V With Accessories In Makpac
Case (Body Only)

Makita DTM51ZJX7 Multi-tool Cordless 18V with Accessories in Makpac Case (Body Only) With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles and can flush cut nails and metal pipework. Change the blade for the sanding plate and you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). With a wide variety of accessories available for various applications. Battery and Charger are not included. Features: Tool-less accessory clamp for quick installation and replacement 12 angle setting of accessories at
every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood and Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper
RIP - This product is no longer available on our network. It was last seen on 31.03.2015

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: MAK-DTM51ZJX7
Availability: In Stock
£154.00

Product Description

Makita DTM51ZJX7 Multi-tool Cordless 18V with Accessories in Makpac Case (Body Only) With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework. Change the blade for the sanding plate & you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). With a wide variety of accessories available for various applications. Battery & Charger are not included.

Features:
Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Battery - A device used for the storage of electricity
Minute - A measurement of time, 60 seconds is equal to one minute
Ceramic - A hard material with excellent heat resistance made by heating a crystaline substance such as clay
multi-tool - A device which can complete several tasks
blade - A flat part of a device which usually has a cutting edge
Dust - A general term used for micro particles in the atmosphere
Red - One of the three primary colours
Makita - Makita are high end manufacturers of power tools with experience spanning nearly a century. Long lasting power tools unrivaled in quality and design.
Wood - A hard material found in trees. Used for tool making, fuel and construction.
speed - A measurement of how fast an object travels between two points
Quick - Something that is fast
Versatile - Something that can be adapted to various different tasks.
Versatile - Something that is able to adapt to its surroundings or its requirements.
Accessory - An item that can contribute to an activity or process to enhance its look or performance.
Wide - Something with a large width.
Degree - An angle measurement, also can be the measurement of an extent that something happens, can also relate to an university academic measurement.
degree - The extremity of something or the angle. Can also relate to a university achievement.
Accessory - An item that is added in order to make the original item more useful or attractive.
Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu