Makita DTL061Z 18 Volt LXT Cordless Angle Impact Driver (Body Only) is compact in design with built in job light The Makita DTL061Z has a compact head for easy access in tight spaces.

Features: 4 pole motor Keyless single sleeve hex chuck Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time Large trigger Batteries or charger not included Machine compatible with Makita BL1830, BL1840 & bl 1850 batteries

...

Makita DTM50 18V Cordless Oscillating Multicutter (1 x 3.0 Ah Battery) This e Xclusive Toolstop deal consists of the Makita 18V DTM50 Cordless Oscillating Multicutter & 1 x 3.0 Ah BL1830B Battery. This deal is sold without a charger & carry case. DTM50

Features: Hex wrench holder on body Variable speed control dial Accessories can be installed at 30

...

Makita DTM50RFX3 18 Volt Lithium ion Cordless Oscillating Multicutter complete with 1 battery, charger & heavy duty kitbox plus 30 Accessories

Features: Hex wrench holder on body Variable speed control dial Dust extraction attachment Accessories can be installed at 30

...

Makita DTM50Z LXT 18V Li-Ion Cordless Oscillating Multicutter (Body Only) in Black Cube Bag This e Xclusive Toolstop Deal consists of the Makita DTM50Z Cordless Oscillating Multicutter & the Makita 831373-8 Black 10 Inch / 225mm Cube Tool Bag. The Makita DTM50 powerful & versatile tool with 3.2 ...

Makita DTM50Z 18 Volt Lithium ion Cordless Oscillating Multicutter
- Body Only Powerful & versatile tool with 3.2° oscillation
...

Makita DTM51 Multi-tool with DC18RC Charger in Makpac Case with Dust Extraction & Accessories (2 x 3.0 Ah Batteries) This e Xclusive Toolstop deal consists of the DTM51 Multi-tool, DC18RC single charger & 2 BL1830B 3.0 Ah Batteries all stored in a Makpac Connector Case Type 3. With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework. Change the blade for the sanding plate & you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). DTM51

Features: Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories BL1830B

Features: Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper  





...

Makita DTM51Z 18V LXT Multi Tool (Body Only In Carton) With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework.

Features: Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Soft start Ergonomic barrel grip
- Perfect size & shape for extra comfort High operating efficiency Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories


...

Makita DTM51ZJX7 Multi-tool with Accessories in Makpac Connector Case Type 3 + DC18RD Twin Charger (2 x 5.0 Ah Batteries) This e Xclusive Toolstop deal consists of the Makita DTM51 Cordless 18V Multi-Tool with up to 20, 000 oscillations per minute, 2 x Makita BL1850B Batteries, DC18RD Twin Charger capable of charging two Makita 18V batteries at the same time & a Makpac Carry Case. Also included is a Delta Backing Pad, 20 various grit sanding sheets & a blade for cutting wood & metal. DTM51 Multi-Tool: Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories BL1850B

Features: Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 45 minute charge time Same weight & size as 3 Ah or 4 Ah battery Works with your current Li-ion Chargers Longer run time & battery life Compatible 18V li-ion machines which have the following markings: DC18RD Charging Times Two 3.0 Ah BL1830 batteries
- 22 minutes Two 4.0 Ah BL1840 batteries
- 36 minutes Two 5.0 Ah BL1850 batteries
- 45 minutes Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper





...

Makita DTM51ZJX7 Multi-tool Cordless 18V with Accessories in Makpac Case (Body Only) With up to 20, 000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles & can flush cut nails & metal pipework. Change the blade for the sanding plate & you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). With a wide variety of accessories available for various applications. Battery & Charger are not included.

Features: Tool-less accessory clamp for quick installation & replacement 12 angle setting of accessories at every 30°from 0° to 360° Variable speed control by dial Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has beenused up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts OIS- Makita, Bosch & Fein accessories Comes With: Makita 821551-8 Makpac Connector Case Type 3 8376718 Case Inlay 196765-1 Dust extraction System TMA006 Blade for Wood & Metal Sanding attachment 5 x 60 grit sandpaper 5 x 80 grit sandpaper 5 x 120 grit sandpaper 5 x 180 grit sandpaper

...

Makita DTW1001RTJ Impact Wrench 18V Brushless LXT Li-ion 3/4 Inch Square Drive with 2 x 5.0 Ah Batteries, Charger & Makpac Type 3 Connector Case The DTW1001 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1050 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button.

Features: Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: 2 x BL1850 5.0 Ah batteries DC18RC charger Makpac type 3 connector case [https://www.youtube.com/watch?v=z Et 9-_f SDT4] Battery Type: Li-ion Voltage: 18V Driving Shank: 3/4" (19mm) Square Impact Power Selection Hard / Med / Soft Impacts per min: 0
- 2, 200ipm / 2, 000ipm / 1, 800ipm No Load Speed: 0
- 1, 800rpm / 1, 000rpm / 900rpm Max Tightening Torque: 1050 Nm Nut Busting Torque: 1700 Nm Standard Bolt: M12-M30 High Strength Bolt: M10-M24 Sound Pressure: 98 d B (A) Sound Power: 109 d B (A) Sound K Factor: 3 d B (A) Vibration: 15.5 m/s 2 Vibration K Factor: 2 m/s Net Weight: 3.7kg



...