Makita DSS610Z 18 Volt LXT Li-ion Circular Saw complete with Saw Blade, Guide Rule & Hex Wrench. This replaces model BSS610Z. The Makita DSS610 18V Lithium-ion cordless circular saw is a versatile all rounder. The 165mm circular saw blade provides a no load speed of 3700rpm, performing an impressive 57mm max depth of cut at 90 degrees, 40mm max depth of cut at 45 degrees making it ideal for a range of applications. With its built in LED job light, handy in low visibility. Also featuring a double safety trigger, high comfort grips, large lock off lever, removable dust nozzle & built in blow-off nozzle. The DSS610 will run on 3.0 Ah BL1830 or 4.0 Ah BL1840. People who bought this say, Very convenient, fast & clean cutting, blade supplied is very good " Typical Makita, good tool easy to use"

Features: Powerful 360W maximum output, yet still with the extra-lightweight & compact design achieved by using Lithium-ion battery as power unit Smooth & powerful cutting at the high rotational speed of 3, 700 rpm delivered from enhanced motor Rubberised soft grip Double safety trigger Large lock off lever LED Job light with afterglow Easy to trace cutting line due to LED joblight with afterglow & built-in blow-off nozzle that directs sawdust away from cutting line Comes with: Carbide tipped saw blade Guide rule Hex wrench Instruction Manual No batteries, kitbox or charger included. PLEASE NOTE
- video shows older model circular saw with same

Specification Machine compatible with Makita BL1830 & BL1840 & BL1850 batteries




...

Makita DSS611 Circular Saw + Charger (1 x 4.0 Ah Battery) This e Xclusive Toolstop 18V Deal consists of the Makita DSS611 18V LXT Cordless Circular Saw with a Makita BL1840B (1967265-4) 18 Volt 4.0 Ah Lithium-Ion Battery, Makita Fast Battery Charger DC18RC Li-ion 14.4V
- 18V & Makita 821552-6 Makpac Connector Case Type 4. DSS611 Circular saw

Features: Lightweight & compact Rigid aluminium base provides high quality & toughness Double safety trigger will prevent accidental starting, is easy to operate even with gloved hands & can be operated from both sides of the handle Bevel cuts up to 50 degrees Smooth & powerful cutting at the high rotational speed of 3, 700 rpm delivered from enhanced motor Rubberised soft grip which provides comfortable handling & more control but also minimises hand strain Safety cover with calibration line for adjusting depth Removable dust nozzle allows a vacuum to be connected Hex wrench is storable on board the saw BL1840B

Features: Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 36 minute charge time DC18RC Charger

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Connector Case

Features: Stackable for storage & easy transportation Strong & collaspible handles DSS611 Max Cut @ 90









...

Makita DSS611RFE Circular Saw 18V LXT li-ion complete with 2 x 3.0 Ah Batteries, Blade, DC18RC Charger & Kitbox with safe blade storage compartment. Model DSS611 has been developed as a cost-competitive sister tool of Model DSS610. It has a rigid aluminium base to give a flat perfect cut, time after time & an attachable dust nozzle for connection to a vacuum to help keep the working enviroment dust free. The hand grip is non-slip for added control. With safety in mind Makita have included a large lock off lever to prevent accidental starting & a blade cover with calibration lines for adjusting cutting depths. Features the same lightweight design, portability & high performance as DSS610 although the following functions have been removed: LED Job light, Positive stop at 45 degrees, Blower function, Electric brake. Compatible with Makita BL1830 3.0 Ah or BL1840 4.0 Ah Batteries.

Features: Lightweight & compact Double safety trigger Smooth & powerful cutting at the high rotational speed of 3, 700 rpm delivered from enhanced motor Rubberised soft grip for comfort Removable dust nozzle 22 minute charge time with the air cooled Makstar Optimum Charging System Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery Comes with: 2 x 3 Ah Li-ion Batteries Charger Kitbox Cutting Blade Machine compatible with Makita BL1830 & BL1840 batteries [https://www.youtube.com/watch?v= Wng A2n ZRYOc] Max Cut @ 90

...

Makita DSS611Z 18 volt Circular Saw Li-Ion (Body Only), complete with TCT saw blade, hex wrench & guide rule. This replaces model BSS611Z. Durable saw with Makita marathon motor, guide rule & soft-grip handle. With an aluminium base for saw rigidity, blade safety cover. The DSS611Z 165mm circular saw provides a no load speed of 3700rpm, performing an impressive 57mm max depth of cut at 90 degrees, 40mm max depth of cut at 45 degrees making it ideal for a range of applications. The Makita DSS611 features the same lightweight design, 3.1kg, portability & high performance as DSS610 although the following functions have been removed: LED Job light, Positive stop at 45 degrees, Blower function, Electric brake. This provides for a much better value tool. Will run on Makita BL1830 3.0 Ah, BL1840 4.0 Ah or BL1850 5 Ah Batteries (not included). People who bought this say, " Excellent machine, Powerful although lightweight, Easy to use, Good all rounder." " Excellent value for your money, loads of power clean cuts, great little tool." " Great bit of kit."

Features: Lightweight & compact Rigid aluminium base provides high quality & toughness Double safety trigger will prevent accidental starting, is easy to operate even with gloved hands & can be operated from both sides of the handle Bevel cuts up to 50 degrees Smooth & powerful cutting at the high rotational speed of 3, 700 rpm delivered from enhanced motor Rubberised soft grip which provides comfortable handling & more control but also minimises hand strain Safety cover with calibration line for adjusting depth Removable dust nozzle allows a vacuum to be connected Hex wrench is storable on board the saw Batteries or charger are NOT included Machine compatible with Makita BL1830, BL1840 & BL1850 batteries [https://www.youtube.com/watch?v= Wng A2n ZRYOc] Max Cut @ 90

...

Makita DST112Z Cordless 18V Stapler (Body Only) The Makita DST112 is a Cordless Stapler (for RT staple) powered by 18V Li-ion batteries & developed based on the model DST110. It will give 6000 shot per charge on a 3.0 Ah battery & can hold up to 150 staples in its magazine. Sold without battery or charger in a cardboard carton.

Features: Anti-dry-fire mechanism Trigger lock LED job light Sequential & bump firing Compact & lightweight design Ergonomically designed handle Plastic magazine for lighter weight Battery fuel gauge Staple window to check remaining staples Belt hook Comes With: Safety goggles Belt clip

...

Makita DTD129RFE 18V Li-on Cordless Brushless Impact Driver (2 x 3 Ah Batteries) The Makita DTD129 Cordless Impact Driver has been developed specially for light to medium duty fastening applications. This model is equipped with a basic BLDC motor (Brush Less DC motor) specially designed to provide, above all, more work amount on a single full battery charge.

Features: LED Job light with pre-glow function BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production & increased work amount on a single full battery charge Comes with: 2 x 3 Ah li-ion batteries Charger Kitbox Belt clip [https://www.youtube.com/watch?v= Bx 5 Ht Y-o Zi I] Electric Brake: Yes Battery Type: Lithium-ion Battery Ah: 3.0 Ah Max Fastening Torque: 160 Nm Charging Time: 22 min Variable Speed Control Trigger: Yes No Load Speed: 0
- 2500 rpm Maximum Output: 220 w Machine Screw: M4-M8 Impacts per Minute: 0-3200 ipm Driving Shank: 6.35mm (1/4") Hex Voltage: 18 v Net weight: 1.5kg


...

Makita DTD129Z Impact Driver 18V Li-on Cordless Brushless (Body Only) The Makita DTD129 Cordless Impact Driver has been developed specially for light to medium duty fastening applications. This model is equipped with a basic BLDC motor (Brush Less DC motor) specially designed to provide, above all, more work amount on a single full battery charge. No battery supplied, comes in a cardboard carton. Will run on Makita 3.0 Ah BL1830 or 4.0 Ah BL1840 batteries. Satisfied customers who bought this say: " As you would expect & as I have learned, Makita is the name to trust. This Driver is robust, swift & easy to use. Does the job & begs for more." " Very useful tool that's always in action. Compact, light & efficient."

Features: LED Job light with pre-glow function BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production & increased work amount on a single full battery charge Comes with: Belt clip [https://www.youtube.com/watch?v= Bx 5 Ht Y-o Zi I] Machine compatible with Makita BL1830 & BL1840 & BL1850 batteries Electric Brake: Yes Battery Type: Lithium-ion (Not Included) Battery Ah: 3.0 Ah Max Fastening Torque: 160 Nm Charging Time: 22 min Variable Speed Control Trigger: Yes No Load Speed: 0
- 2500 rpm Maximum Output: 220 w Machine Screw: M4-M8 Impacts per Minute: 0-3200 ipm Driving Shank: 6.35mm (1/4") Hex Voltage: 18 v Net weight: 1.5kg


...

Makita DTD134Z Impact Driver 14.4V Cordless LTX (Body Only) The Makita DTD134Z Cordless Impact Driver is an advanced version of the BTD130F featuring the same ergonomically designed handle & 4-pole motor. With a more compact design, only 138mm long, enhanced dust & drip-proof performance & battery fuel gauge. Comes with a redesigned belt clip. This machine is sold without battery or charger in a cardboard carton.

Features: Compact design with a short overall length of 138mm One-touch bit installation LED job light with pre-glow & afterglow functions Enhanced dust & drip-proof performance Compact & lightweight, 4-pole motor Ergonomically designed handle Battery fuel gauge Comes With: Belt clip   Voltage: 14.4 v Drive shank Hex: 1/4 " Standard Bolt: M5-M14 Impacts: 0-3200 ipm Max Torque: 155 Nm No Load Speed: 0-2400 rpm Battery Type: Lithium-ion Vibration: Fastening Bolt: 12 m/sec

...

Makita DTD146Z LXT 18 Volt Lithium-Ion Cordless Impact Driver (Body Only). This replaced model BTD146Z. The Makita DTD146 Cordless Impact Driver features ergonomically designed handle & 4-pole motor, plus compact design, enhanced dust & drip-proof performance & battery fuel gauge.

Features: Very compact with overall length of only 138mm Weights only 1.5kg One touch bit installation Phosphorescent bumper Enhanced dust & drip-proof performance Battery level indicator Compact & lightweight, 4-pole motor LED Job light with afterglow Forward/reverse rotation Variable speed trigger Electronic brake [http://www.youtube.com/watch?v=4 N Hzk I2 Nsf A] Batteries or charger are NOT included PLEASE NOTE
- video shows older model impact driver with same

Specification Machine compatible with Makita BL1830, BL1840 & BL1850 batteries Max torque: 160 Nm Standard Bolt: M5-M14 Charging Time: 22 min No load speed: 0
- 2300rpm Impacts per minute: 3200 ipm

Dimensions: 138mm (L) x 79mm (W) x 236mm (H) Net weight: 1.3kg







...

Makita DTD148Z 18V Li-on Cordless Brushless Impact Driver with 3-Stage Impact Power Settings (Body Only) The brushless motor on the DTD148 means that you will get around 30% extra life per battery cell & also the unit is totally maintenance free with no brushes to replace. Boasting 3 speeds selected by electronic control & a 3 stage impact selection meaning it is ideal for both delicate work & also when you need that extra bit of power when driving larger screws into hardwood. This machine is exceptionally compact & lightweight (just 1.5kg) & has an electronic switch to reduce hand fatigue making it ideal for prolonged use. With a LED light situated around the bit holder to illuminate the work piece which can also be turned off to further prolong battery life.

Features: Enhanced maximum fastening torque of 175 Nm "T" mode: Tightening mode for self-drilling screw Electronic 3-stage impact power selection (Hard/ Medium/ Soft) One touch sliding chuck for easy bit installation & removal LED job light with pre-glow & after-glow for working in poor light Battery fuel gauge indicates the remaining battery power Ergonomic soft grip for great comfort Electric brake Variable speed control by trigger Forward/reverse rotation Compact overall length of 119mm XPT
- Extreme Protection Technology with enhanced drip & dust proofing performance for outdoor applications & harsh environments Batteries or charger are NOT included Machine compatible with Makita BL1830, BL1840 & BL1850 batteries [https://www.youtube.com/watch?v=e 2 Qus Yfz 4 Rw] Voltage: 18 v Standard Bolt: M5-M16 High Tensile Bolt: M5-M14 Max Fastening Torque: 175 Nm Impact Rate
- 1st: 0-1, 100ipm Impact Rate
- 2nd: 0-2, 600ipm Impact Rate
- 3rd: 0-3, 800ipm No Load Speed
- 1st: 0-1, 100rpm No Load Speed
- 2nd: 0-2, 100rpm No Load Speed
- 3rd: 0-3, 600rpm Vibration: Fastening Bolt: 12.5 m/sec








...