The Hitachi NR90GC2 1st fix gas nailer is one of the most flexible cordless tools on the market. It is compatible with Paslode nails & gas & can cope easily with up to 1200 nails per fuel cell charge. New model comes with 2 x 1.5 Ah lithium ion batteries. Good power tools are essential for any construction project & as its name suggests, the Hitachi 1st fix gas nailer is ideal for the important initial stages where a good join is vital. Clipped head or 'D' head professional power tools like this allow nails to be grouped in clusters for added strength. This Hitachi gas nailer is the successor to the Hitachi NR90GC Nailgun & features a high visibility magazine & easy access fuel cell chamber. The quick load rear access magazine is convenient, as is the two action nail feed
- simply drop nails in & pull the feeder back. It accepts nails for the Paslode IM350 nailgun as well as the new Hitachi clipped head nails, allowing you to use up current nail supplies. This powerful nailer takes 2 x 1.5 Ah li-ion batteries & the full 60-minute charge means less downtime on important jobs. The longer trigger stroke ensures user safety & the high 90J driving power ensures a strong fix every time. The ability to deliver up to 1200 nails for each fuel cell charge is a real plus & the nailer is easy to clean when finished. Safety features like the dry firing lockout & soft, non-slip rubber grip add to its appeal while the fold away hook can be looped over joints for convenience.

Features: 2 x 1.5 Ah li-ion batteries & 60 minute charger eliminates downtime High driving power of 90J Up to 1200 nails per fuel cell Longer trigger stroke for safer use Dry firing lockout Easy to clean Easy access fuel cell chamber Quick load rear access magazine Two action nail feed; simply drop in the nails & pull back the feeder High visibility magazine Fold away hook fits over joists for greater convenience Lightweight, well balanced design Non-slip soft rubber grip Comes with: 2 x 7.2V 1.5 Ah lithium-ion Batteries UC18YG battery charger Safety glasses 4mm Hex wrench Oil Carrying case Hitachi 1st fix gas nailer at TOOLSTOP


...

Hitachi NT1850CBSL/J4 18V 18 Gauge Straight Brad Brushless Nailer (Body Only) The Hitachi NT1850CBSL/J4 18 Volt 18 Gauge Straight Brad Brushless Nailer comes with a brushless motor which provides increased run time & means there is less maintenance & incresed durability. This nailer also has a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time. Dry-fire lockout prevents nailer activation when nail count is low. The straight magazine holds 100 18-gauge fasteners from 25mm to 63mm in length. This Nailer is sold in a cardboard box without batteries & a charger.

Features: Freedom from cumbersome air hose & compressor saves your valuable time in setup, during applications & in jobsite clean up Selective activation switch transitions between sequential mode & bump fire mode, when rapid nailing is preferred Tool-less depth of drive adjustment for flush drives into various materials Quick clear nose with tool-less jam release for easy maintenance & reduced downtime LED light is handy when working in low light areas Ergonomically formed soft grip handle provides comfort & ensures a secure hold Power button located on control panel at base of handle must be activated to use the nailer Automatic power shut off after 30 minutes of inactivity, for added safety Side-lock switch is incorporated to prevent accidental firing Low battery indicator light allows the user to see battery power status to prevent unexpected downtime Detachable no-mar nose cap protects work surfaces from scratches or indentations Pivoting belt hook can be mounted on either side of the nailer to accommodate left or right handed users Compatible with all Hitachi 18V Lithium Ion slide type batteries Comes With: Safety Glasses Fasteners: 18-Gauge, Straight Finish Nails Nail Length: 25mm to 63mm Magazine Capacity: 100 Magazine Type: Side Load Belt Hook: Variable Position Jam Release: Tool-less Depth of Drive: Tool-less Motor Type: Brushless Driving Speed: 2-3 Nails/ Sec Nails per Charge: Up to 1, 650 Firing Modes: Sequential/ Bump Battery Charge Indicator: Yes LED Light: Yes Dry-Fire Lockout: Yes

...

Hitachi NT1850CBSL/JX 18 Volt 18 Gauge Straight Brad Brushless Nailer (2 x 3 Ah Batteries) The Hitachi NT1850CBSL/JX 18 Volt 18 Gauge Straight Brad Brushless Nailer comes with a brushless motor which provides increased run time & means there is less maintenance & incresed durability. This nailer also has a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time. Dry-fire lockout prevents nailer activation when nail count is low. The straight magazine holds 100 18-gauge fasteners from 25mm to 63mm in length. This Nailer is sold in a plastic carry case with two 3 Ah Batteries & a charger.

Features: Freedom from cumbersome air hose & compressor saves your valuable time in setup, during applications & in jobsite clean up Selective activation switch transitions between sequential mode & bump fire mode, when rapid nailing is preferred Tool-less depth of drive adjustment for flush drives into various materials Quick clear nose with tool-less jam release for easy maintenance & reduced downtime LED light is handy when working in low light areas Ergonomically formed soft grip handle provides comfort & ensures a secure hold Power button located on control panel at base of handle must be activated to use the nailer Automatic power shut off after 30 minutes of inactivity, for added safety Side-lock switch is incorporated to prevent accidental firing Low battery indicator light allows the user to see battery power status to prevent unexpected downtime Detachable no-mar nose cap protects work surfaces from scratches or indentations Pivoting belt hook can be mounted on either side of the nailer to accommodate left or right handed users Compatible with all Hitachi 18V Lithium Ion slide type batteries Lightweight & compact 3.0 Ah Li-Ion battery Comes With: Safety Glasses Plastic Carry Case 1 x UC18YFSL Charger 2 x BSL1830C 3 Ah Batteries

...

Hitachi NT1865DBAL/J4 18V 15GA Brushless Angled Finish Nailer (Body Only) The Hitachi NT1865DBAL/J4 is an all new designed 18 Volt Cordless Finish Nailer with a brushless motor for longer run time, less maintenance & increased durability. It needs no air hose or compressor to operate & it also eliminates the cost of fuel cells. Sold as a body only machine (without battery or charger) in a cardboard carton with a nose cap & safety glasses.

Features: Up to 1100 nails per charge Air/spring drive system means less recoil, better flush driving & easier maintenance Selective activation button; easily choose between sequential or bump fire mode Tool free adjustment of drive depth Tool free nose release for quick & easy jam clearance LED work light Lock switch & 30 minute automatic shutdown for increased safety & longer battery life Low battery indicator Pivoting joist hook Comes With: No mar nose cap Safety glasses Battery: None Capacity: 100 nails Dimensions: 344 (l) x 309 (w) x 115 (h) Driving Speed: Up to 3 nails/sec Nail Gauge: 15 Ga Nail Length: 32-65mm Weight: 2.9kg

...

Hitachi NT1865DBSL/J4 16GA Brushless Straight Finish Nailer (Body Only) The Hitachi NT1865DBSL/J4 is an 18 Volt Li-Ion Brushless 16 Ga Straight Finish Nailer which has a unique air spring drive system (similar to Hitachi's pneumatic line). Using compressed air to drive each nail resulting in zero ramp up time & increased shooting speed. With a recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving, even at an angle & easy maintenance due to fewer parts to manage. Comes as a body only tool without battery or charger in a cardboard carton.

Features: All new design cordless finish nailer with brushless motor for longer run time, less maintenance & increased durability No air hose or compressor required No cost of gas cartridges means the more the tool is used the more cost effective Up to 1500 nails per charge using 3.0 Ah battery Air/spring drive system means less recoil, better flush driving & easier maintenance Selective activation button; easily choose between sequential or bump fire mode Tool free adjustment of drive depth Tool free nose release for quick & easy jam clearance LED work light Lock switch & 30 minute automatic shutdown for increased safety & longer battery life Low battery indicator Pivoting joist hook Comes With: Hitachi 3 year warranty
- Online registration required within 28 days of purchase at hitachi-powertools.co.uk/service Safety glasses Drive system: Air Spring Nail Length: 25-65mm Charge Time: 45min Nail Gauge: 16 Ga Nail Capacity: 100 Nails / 2 strips Driving Speed: Up to 3 nails/sec

Dimensions (Lx Wx H): 315 x 298 x 104mm Weight (inc battery) (not included): 3.4kg




...

The Hitachi 2nd fix gas nailer NT65GS offers a lightweight & compact design with a high output to power usage ratio in comparison with other cordless tools on the market Hitachi professional power tools have long held a reputation for innovation & durability in the field of cordless tools. In particular they have pioneered developments in battery life & technologies to expand tool life, that have pushed the industry standard forward. The 2nd fix gas nailer from Hitachi features an output of 1200 nails per fuel cell & a 2000 nail output from a single battery charge. It features 2 x 1.5 Ah Li-on batteries that can be charged in 60 minutes from a cigarette lighter socket. Utilising the same gas & nails as the Paslode IM65 Nailgun, the Hitachi 2nd fix gas nailer enables you to use old stock materials as well as new Hitachi nails. The nail type is straight finish with a length range of 26-65 mm with a 16 gauge diameter. Each magazine holds 100 nails & the overall weight is 1.8 kg. For safety, it features a dry firing lockout. It is easy to use, incorporating tool free depth adjustment & jam clearance, as well as a handy belt hook, it is designed to be easy to clean. With a no mark nose cap included, the Hitachi 2nd fix gas nailer is a compact professional power tool capable of handling on-site as well as DIY jobs.

Features: Lightweight, compact design 2 x 1.5 Ah Li-Ion batteries & 60 minute charger with adapter to charge batteries from a cigarette lighter socket Up to 1200 nails per fuel cell Tool free depth adjustment Dry firing lockout Easy to clean Tool free jam clearance Handy belt hook No mark nose cap included Comes with: 2 x 3.6V 1.5 Ah batteries UC3SML 60 minute charger Safety glasses 2 hex wrenches Oil Nose cap Carrying case Hitachi 2nd fix gas nailer at TOOLSTOP

...

Hitachi P18DSL/J4 18V Cordless Li-ion Planer 82mm (Body Only) The Hitachi P18DSL cordless planer is aimed at the pro carpenter & is robustly made & a good replacement for a corded planer. Body only model
- excludes batteries & charger. Comes with Blade Settings Gauge, Guide (with set screw) & Wrench in a cardboard box.

Features: Best in class 16, 000 RPM blade rotation speed with high-speed motor gives a fine finish in all materials Best in class max cutting depth of 2mm 82mm tungsten carbide blades Equipped with brake
- when the switch trigger is released, the brake stops the blade rotation automatically Battery remaining level indicator Comfortable operation thanks to anti-slipping, soft grip handle easy to hold Built-in stand to prevent contact between blade & material Comes with: Blade Settings Gauge Guide (with set screw) Wrench No load speed: 16000 RPM Capacity (cutting width): 82mm Capacity (max cutting depth): 2mm Maximum rebate: 9mm Overall length: 332mm (13-5/64")
- with battery attached Weight: 2.7kg




...

Hitachi P18DSL/J4 18V Cordless Li-ion Planer 82mm (Body Only) The Hitachi P18DSL cordless planer is aimed at the pro carpenter & is robustly made & a good replacement for a corded planer. Body only model
- excludes batteries & charger. Comes with Blade Settings Gauge, Guide (with set screw) & Wrench in a cardboard box.

Features: Best in class 16, 000 RPM blade rotation speed with high-speed motor gives a fine finish in all materials Best in class max cutting depth of 2mm 82mm tungsten carbide blades Equipped with brake
- when the switch trigger is released, the brake stops the blade rotation automatically Battery remaining level indicator Comfortable operation thanks to anti-slipping, soft grip handle easy to hold Built-in stand to prevent contact between blade & material Compatible with the range of Hitachi 18V slide Li-Ion batteries from 1.5 Ah to 6.0 Ah Comes with: Blade Settings Gauge Guide (with set screw) Wrench [https://www.youtube.com/watch?v=tmf TZVmg Z74] No load speed: 16000 RPM Capacity (cutting width): 82mm Capacity (max cutting depth): 2mm Maximum rebate: 9mm Overall length: 332mm (13-5/64")
- with battery attached Weight: 3.3kg




...

Hitachi P18DSL/JJ 18V Cordless Li-ion Planer complete with 2 batteries, charger & kitbox The Hitachi P18DSL cordless planer is aimed at the pro carpenter & is robustly made & a good replacement for a corded planer.

Features: Best in class 16, 000 RPM blade rotation speed with high-speed motor gives a fine finish in all materials Best in class max cutting depth of 2mm 82mm tungsten carbide blades Equipped with brake
- when the switch trigger is released, the brake stops the blade rotation automatically Battery remaining level indicator Comfortable operation thanks to anti-slipping, soft grip handle easy to hold Built-in stand to prevent contact between blade & material Comes with: 2 x 18V 5 Ah li-ion Batteries (BL1850) Charger (UC18YFSL) 2 Blades Blade Settings Gauge Guide (with set screw) Wrench Battery Cover Carrying Case No load speed: 16000 RPM Capacity (cutting width): 82mm Capacity (max cutting depth): 2mm Maximum rebate: 9mm Overall length: 332mm (13-5/64")
- with battery attached Weight: 3.3kg
- with battery attached




...

Hitachi P20SF Planer (620W) 82mm (3-1/4") Planer The Hitachi P20SF Planer is compact & lightweight (2.5kg) in comparison with other Hitachi planers.

Features: Easy to adjust cutting depth by knob Convenient cord holder Stand to prevent contact between the blade & a work piece Soft grip handle Comes with: Blade Wrench Blade setting gauge Guide Carry case

...