Freezemaster 420D Pipe Freezing Kit complete with new style bungee clamps, freeze cream, insulating towels, gloves & fittings to freeze from 8mm to 42mm. Available in 110 & 240 volts. The Freeze Master is easy to use. Just connect the purpose designed freeze heads to the pipework, upstream & down-stream of the area you want to work on. In as little as 5 minutes, two solid ice plugs can be formed allowing you to carry out your repair quickly & efficiently. It will freeze copper, iron, lead or plastic pipes. It is safe to use. You can leave the machine unattended, & as long as it is connected to the mains, the freeze will continue indefinitely. Unlike a gas freezing method, where a cylinder may run out, there is no danger of ice melting & flooding. The 420D has a Patented microprocessor controlled refrigerant delivery system, ensuring close control of the freeze head temperatures. This technology is proven to deliver reliable performance even if pipes of different size & temperature need freezing at the same time. The Freeze Master is not just an alternative to draining down. It represents a fast, clean, efficient & highly professional new service for you to offer your customers. All machines are fitted with new multilayer hoses with fittings & manifold attachments designed for the latest demands in cryogenic apparatus. Case bodies have three openings where hoses & mains lead can be slotted through so the machine can be used with the lid closed. Machines are supplied with the recently patented Bungee Clamps (making them the most versatile to fit), freeze cream, insulating towels, gloves, reducer screws & a range of reducers. All machines can freeze copper, iron, lead, plastic pipes, etc. Freeze times are super fast on copper pipes. Freeze Master machines have under the lid :- Freeze cream, Towels, Bungee Clamps, Reducer fittings, Mains lead with fitted plug & detailed instructions

Features: The 420D is distinguished by its all new silver case &

Includes:: a new ergonomically designed lay flat handle. An easy access storage compartment for reducers to freeze 8mm to 42mm runs along the top rear Freeze Heads retain the original patented features but are designed to fit straight onto 42mm pipes with reducer fittings for 35mm 28mm 22mm & 15mm. The 420D aluminium heads & reducers have a smart silver finish. Comes With: New Style Bungee clamps Freeze cream Insulating towels Gloves Fittings to freeze from 8mm to 42mm Capacity: 8mm / 10mm / 15mm / 22mm / 28mm / 35mm / 42mm Freeze Time: 5
- 45 minutes Refrigerant: R407 Control: Active capillary (microprocessor) Power (Watts)
- 550

Dimensions
- 360mm x 300mm x 340mm Span: 3.9m Available in 110 or 240 volts Weight: 23kg








...

Freeze Master EZEFREEZE Electric Pipe Freezer 8-28mm 240V The Freeze Master is easy to use. Just connect the purpose designed freeze heads to the pipework, upstream & down-stream of the area you want to work on. In as little as 5 minutes, two solid ice plugs can be formed allowing you to carry out your repair quickly & efficiently. It will freeze copper, iron, lead or plastic pipes. It is safe to use. You can leave the machine unattended, & as long as it is connected to the mains, the freeze will continue indefinitely. Unlike a gas freezing method, where a cylinder may run out, there is no danger of ice melting & flooding. The Freeze Master is not just an alternative to draining down. It represents a fast, clean, efficient & highly professional new service for you to offer your customers. All machines are fitted with new multilayer hoses with fittings & manifold attachments designed for the latest demands in cryogenic apparatus. Case bodies have three openings where hoses & mains lead can be slotted through so the machine can be used with the lid closed. Machines are supplied with the recently patented Bungee Clamps (making them the most versatile to fit), freeze cream, insulating towels, gloves, reducer screws & a range of reducers. All machines can freeze copper, iron, lead, plastic pipes, etc. Freeze times are super fast on copper pipes. Freeze Master machines have under the lid :- Freeze cream, Towels, Bungee Clamps, Reducer fittings, Mains lead with fitted plug & detailed instructions

Features: The ezefreeze is an entry level machine designed to freeze up to 28mm. Housed in a tough metal case which

Includes:: an ergonomically designed lay flat handle. There is easy access to the reducers to freeze 8mm to 28mm which are stored in two panel fixings. Freeze Heads retain the original patented features & are designed to fit straight onto 28mm with reducer fittings for 22mm & 15mm which will freeze microbore. Comes With: Freeze Cream 2 x Towels Gloves



...

Freud LP91M002 Multi Material Circular Saw Blade (190mm x 30mm) 38 Teeth The ultimate saw blade for maximum applications which fits all hand held saws, mitre saws & table saws. Areas of application: 2mm galvanised steel 2mm mild steel angle section 2mm mild box section 3mm aluminium angle section 10mm trespa 6mm plexiglas 4mm plastic sheet 20mm hardwood Nail embedded wood 12mm pine stripwood 25mm MDF 15mm contiboard 30mm worktop Outer diameter: 190mm Bore diameter: 30mm Kerf: 2.0mm Number of teeth: 38 ...

Freud LP91M003 Multi Material Circular Saw Blade (216mm x 30mm) 40 Teeth The ultimate saw blade for maximum applications which fits all hand held saws, mitre saws & table saws. Areas of application: 2mm galvanised steel 2mm mild steel angle section 2mm mild box section 3mm aluminium angle section 10mm trespa 6mm plexiglas 4mm plastic sheet 20mm hardwood Nail embedded wood 12mm pine stripwood 25mm MDF 15mm contiboard 30mm worktop Outer diameter: 216mm Bore diameter: 30mm Kerf: 2.0mm Number of teeth: 40 ...

Freud LP91M006 Multi Material Circular Saw Blade (305mm x 30mm) 80 Teeth The ultimate saw blade for maximum applications which fits all hand held saws, mitre saws & table saws. Areas of application: 2mm galvanised steel 2mm mild steel angle section 2mm mild box section 3mm aluminium angle section 10mm trespa 6mm plexiglas 4mm plastic sheet 20mm hardwood Nail embedded wood 12mm pine stripwood 25mm MDF 15mm contiboard 30mm worktop Outer diameter: 305mm Bore diameter: 30mm Kerf: 2.6mm Number of teeth: 80 ...

Faithfull BPH32 Ball Pein Hammer Hickory Shaft 908g / 32oz The Faithfull range of Hickory shafted ball pein hammers are universal engineers metal working hammers. Precision ground with hardened striking faces to withstand the rigours of all metal working applications. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment & overall

Dimensions. This hammer is fitted with a Hickory handle which is lightweight & extremely strong. Manufactured in accordance to BS876.

Features: Universal metal working hammer Precision ground with hardened striking face Fitted with a lightweight Hickory handle Manufactured in accordance to BS876 Weght
- 900 g (2 lbs) Net Weight: 1.163kg




...

Faithfull FAI-CARPSET 5 Piece Carpenters Tool Kit complete with No.4 smoothing plane, block plane, 9in try square, 9in sliding bevel, & a mortice & marking gauge supplied in Wooden Case.

Features: This exceptional set has been specially commissioned to provide the essentials you need for working with wood All the tools are made to the highest quality from the finest rosewood, brass & steel The set

Includes:: a traditional No.4 smoothing plane, block plane, 9in try square, 9in sliding bevel, & a mortice & marking gauge Comes with the confidence of a 5-year guarantee This is a super gift for the professional, enthusiast or apprentice Supplied in a wooden case Contents: 5 Pieces Net Weight: 4.7kg



...

Faithfull Claw Hammer 567g (20oz) Fibreglass Shaft The Faithfull claw hammer is a carpenters' hammer with precision ground & hardened curved claws to withstand the most heavy nail pulling. The hammer has a securely fitted steel shaft providing maximum leverage. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment & overall

Dimensions & is manufactured in accordance to BS876.

Features: A carpenters hammer with precision ground & hardened curved claws to withstand the most heavy nail pulling The securely fitted steel shaft providing maximum leverage Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment & overall

Dimensions Hardened & heat-treated head Precision ground striking face Sturdy claw for nail pulling Tubular steel shaft Rubber non-slip handle grip   Weight
- 570g (1 1/4 lb) Manufactured in accordance to BS876 Net Weight: 1.116kg






...

Faithfull FPPCR10MPRO Fast Rewind Cable Reel 10 Metres 720 Watt 10 Amp
- 4 socket Faithfull fast rewind cable reel has a patented
...

Faithfull M16PSET HSS Titanium Drillbit Set 16 Piece 1
- 8mm Titanium coated high speed steel (HSS) straight shank drills for use
...