Eclipse ETBC36 36" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features: Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire






...

Eclipse ETBR42 T Bar Clamp 42 Inch / 1070 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR42 is a 42 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features: Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...

Eclipse ETBR48 T Bar Clamp 48 Inch / 1220 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR48 is a 48 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features: Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...

Eclipse ETBR54 T Bar Clamp 54 Inch / 1370 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR54 is a 54 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features: Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...

Eclipse ETV-3 Portable Table Vice 3 Inch / 75mm The Eclipse ETV-3 is a Portable Table Vice for light workshop duty or a DIY hobbyist. The Vice has 3 Inch wide jaws with a 58mm capacity. Features a built in clamp to allow easy fitting to a bench, table or work surface.

Features: Up to 300kg clamping force Pipe clamp is incorporated into jaws Small anvil at the rear of vice for beating & hammering

...

Eclipse EVS1000 Voltage Sensor 80
- 1000 Volts For safely checking the presence of voltage in cables, wall sockets, fuses, circuit
...

Eclipse EWC8 Wire Rope Cutter 8 Inch / 200mm Suitable for a multitude of agricultural, garden, automotive & marine cutting tasks. Able to cut through a variety of different metal wire or rope materials due to angled hardened jaws.

Features: Angled & hardened blades ensure a clean cut Spring loaded head gives a fast, smooth cutting action Non-slip rubber handles Model: EWC8 Total Length: 8" (200mm) Materials & Recommended Capacities: Mild steel strand: 6.5mm High tensile steel rope: 5mm Soft steel wire: 5mm Copper aluminium rod: 5mm Steel Rod: 4mm Spring wire: 2.5mm Electric Cable: (not armoured) 6.5mm Weight: 0.5kg

...

Eclipse EWWQR7 Woodworking Vice Quick Release 7 Inch / 178mm The Eclipse EWWQR7 Woodworking Vice has a quick release trigger which opens & closes quickly without using the main screw. The EWWQR7 is also fitted with an adjustable front stop or dog. This gives an additional clamping facility when used with a bench stop, to provide a normal vice & a tail vice in one tool. To increase safety, the fused tommy bar will bend before the vice can become over-stressed.

Features: Body & sliding jaw are manufactured from high quality grey cast iron. This material has excellent shock absorbing qualities Fitted with an adjustable front stop which gives an additional clamping facility when used in conjunction with a bench stop Quick release trigger Tommy bar will bend to protect vice Handle & main screw are manufactured from steel Slide rods & main screw manufactured from steel with a single start thread

...

Eclipse EWWQR9 Woodworking Vice Quick Release 9 Inch / 230mm The Eclipse EWWQR9 Woodworking Vice has a quick release trigger which opens & closes quickly without using the main screw. The EWWQR9 is also fitted with an adjustable front stop or dog. This gives an additional clamping facility when used with a bench stop, to provide a normal vice & a tail vice in one tool. To increase safety, the fused tommy bar will bend before the vice can become over-stressed.

Features: Body & sliding jaw are manufactured from high quality grey cast iron. This material has excellent shock absorbing qualities Fitted with an adjustable front stop which gives an additional clamping facility when used in conjunction with a bench stop Quick release trigger Tommy bar will bend to protect vice Handle & main screw are manufactured from steel Slide rods & main screw manufactured from steel with a single start thread

...

Eclipse MBIT mini junior hacksaw blades (pack of 10)
- metal

Features: Replacement junior hacksaw blades


...