More From Contributor

£9.00
Eclipse ESGPS-8 General Purpose Snips with Spring 8"/200mm The Eclipse ESGPS-8 General Purpose Snips are primarily for cutting sheet metal. The spring handle creates ease of use during repetitive cutting. The precision hollow ground blades reduce friction for an easy cutting action & since they are also induction hardened & tempered, they can be easily re-sharpened.

Features:
For cutting sheet metal Spring handle for ease of use during repetitive cutting The precision hollow ground blades reduce friction for an easy cutting action & since they are also induction hardened & tempered, they can be easily re-sharpened The leather strap ensures safe storage

...
Archived Product
£15.00
Eclipse ESWDPW2 Swedish Pattern Pipe Wrench 2 Inch / 51mm

Features:
Bent nose 90 degree angled head Manufactured

...
Archived Product
£18.00
Eclipse ETBC14 14" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features:
Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire






...
Archived Product
£20.00
Eclipse ETBC18 18" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features:
Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire






...
Archived Product
£24.00
Eclipse ETBC24 24" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features:
Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire






...
Archived Product
£39.00
Eclipse ETBC36 36" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features:
Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire






...
Archived Product
£34.00
Eclipse ETBR42 T Bar Clamp 42 Inch / 1070 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR42 is a 42 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features:
Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...
Archived Product
£36.00
Eclipse ETBR48 T Bar Clamp 48 Inch / 1220 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR48 is a 48 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features:
Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...
Archived Product
£38.00
Eclipse ETBR54 T Bar Clamp 54 Inch / 1370 mm Eclipse make Clamps for a wide range of woodworking & metalworking applications. The ETBR54 is a 54 Inch T Bar Clamp with an average clamping force of 1000kg (2200lbs). The drilled feet in the fixed head enable the clamp to be mounted to a workbench. The ductile head & slide are guaranteed unbreakable, whilst the steel bar offers maximum tensile & yield strength. The slightly tapered jaws enable perfectly parallel clamping & the fast action rolled thread applies pressure quickly & smoothly to the workpiece.

Features:
Unbreakable ductile head & slide Mountable to workbench All metal construction Tapered jaws for parallel clamping  

...
Archived Product
£23.00
Eclipse ETV-3 Portable Table Vice 3 Inch / 75mm The Eclipse ETV-3 is a Portable Table Vice for light workshop duty or a DIY hobbyist. The Vice has 3 Inch wide jaws with a 58mm capacity. Features a built in clamp to allow easy fitting to a bench, table or work surface.

Features:
Up to 300kg clamping force Pipe clamp is incorporated into jaws Small anvil at the rear of vice for beating & hammering

...
Archived Product

Eclipse ETBC30 30in Tubular Handled Bolt Cutters

Eclipse ETBC30 30" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear Features: Strength & Accuracy - The jaws are drop forged and machined to precise specifications to produce a resilient body and rigid cutting edge Safety - Built-in stops will yield rather than break Comfort in use - Ergonomic soft feel rubber grips for added comfort Maximum strength - Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity - Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh and wire, cold drawn alloy steel and tempered sprung wire
RIP - This product is no longer available on our network. It was last seen on 31.03.2015

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: ECL-ETBC30
Availability: In Stock
£30.00

Product Description

Eclipse ETBC30 30" Tubular Handled Bolt Cutters The cutter adjustment is by eccentric (a cam bolt which adjusts the cutter head when turned) to compensate for blade wear

Features:
Strength & Accuracy
- The jaws are drop forged & machined to precise specifications to produce a resilient body & rigid cutting edge Safety
- Built-in stops will yield rather than break Comfort in use
- Ergonomic soft feel rubber grips for added comfort Maximum strength
- Every pound of force applied to the handles is amplified to produce 80lbs (36kg) of force between the jaws Versatlity
- Can cut high tensile steel rods, bolts, pre-stressed concrete reinforcing rods, mesh & wire, cold drawn alloy steel & tempered sprung wire

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Ergonomic - A specific design to fit the purpose of the user
Steel - An alloy made predominately of Iron combined with <2% carbon
rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
soft - A descriptive word for an item/sound which is gentle to the touch or ears
blade - A flat part of a device which usually has a cutting edge
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
cutting - The seperation of an object usually using a cutting tool such as a knife
Safety - prevents damage being caused.
Comfort - something that feels nice to the user. Often relaxing.
Precise - A measurement on the accuracy of something
Mesh - A material mad up of crossed over fibres such as metal or thread.
Head - The upper part of a body typically separated by the neck.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu