Dewalt DE7023 Mitre Saw Legstand complete with 2 work stops/supports & mitre saw brackets The DE7023 legstand from Dewalt is a solid, sturdy & robust stand which is easy to put together & really simple to use. Will quite easily hold a 5 metre length of skirting, pelmet or cornice. The stand is easily adjusted for all lengths of timber & folds down after use so can easily be slid into the back of a vehicle. Here's what people say who bought this: "I use this with my 780xps saw, I wouldn't be without it as it makes using the large saw so easy & can take long lengths of timber with the extendable rails." " Makes life much easier. Always working at a good height with work supported safely." " The supports are moveable along the whole length of the stand right up to the saw mounts, & can easily be turned into stops for repeatable cuts. Very easy to carry due to fold up design & handle." " Great item easy to put together on the job site, quality product built like a horse. Should last forever."

Features: Suitable for all Dewalt Mitre Saws (Mitre Saw not included) Lightweight aluminium construction provides portability in & around the jobsite The 1.7 metre beam is extendable up to 3.83 metres for use with large workpieces The beam can support up to 227kg providing maximum flexibility & capacity Work stops can be converted into end stops for repetative cutting to length Integrated folding legs avoids unnecessary assembly & minimises time Integrated carry handle makes transporting this legstand as easy as 1-2-3 Comes with: 2 x Work stops/support Mitre saw brackets

...

Dewalt DE7033 Heavy Duty Short Beam Mitre Saw Leg Stand The Dewalt DE7033 is an update of the DE7023 legst&. The main improvements are that the beam is much shorter allowing easier transportation but still extends up 2.6m. It gives outstanding flexibility for Mitre Saw Cutting with its lightweight aluminium construction which provides portability in & around the jobsite. Compatible with the accessories & attachments for the DE7023 & fits Dewalt machines: DW701 DW707 DW712 DW706 DW706E DW708 DW702 DW703 DW017 DW716 DW716E & DW718. Customers who bought this Leg stand say: " Folds down for ease of transportation." " Can place my saw anywhere in my workshop, can't think of anything that I would change or improve on." "I should have invested in one ages ago, would have saved my back no end of problems." " Ease of use quick to set up, solid & reliable." " Legs are sturdy, frame is solid & arms are not flimsy either. All in all great product."

Features: Outstanding flexibility for Mitre Saw Cutting Accommodates all DEWALT mitre saws Lightweight aluminium construction provides portability in & around the jobsite only 14kgs 1.12 metre beam extends to support up to 2.6 metres for use with large workpieces The beam can support up to 227kg providing maximum flexibility & capacity Work stops can be converted into end stops for repetitive cutting to length Integral folding legs avoids unnecessary assembly Integrated carry handle provides ease of transportation Comes with: 2 x Work stops/support 2 x Mitre saw brackets

...

Dewalt DE7035 Heavy Duty Legstand This heavy duty legstand is versatile because it can be used as a legstand for your mitre saw as well as as a sawhorse
- sold in singles

Features: Top Beam compatible to DE7023 Mitre Saw Clamps Made from durable materials for long life Can also be used as outfeed table for table saws Quick release leg locks making the stands easy to collapse & handle Can be used in pairs as sawhorses with 1200kg capacity Stands interlock so can be easily carried & transported in pairs


...

Dewalt DE7400 Heavy Duty Rolling Saw Workstation with Universal Brackets to Suit Most Table Saws The DE7400 Saw Stand is built to a very high standard as you would expect from Dewalt. Constructed from lightweight Aluminium to increase portability but heavy duty in all areas except weight. This wheeled Workstation has been designed to make the heaviest of Saws easily transportable. Customers who bought this item say: " Great product, no more carrying my saw all over site, well built, easy to set up, well worth the money." " The best part about this heavy duty bench is that you can keep the saw attached to the frame & with the handle & wheels it's like pulling along a trolley which is fantastic for getting the saw around jobsite." " Easy to use & move." " This product is a MUST for anyone with a portable chop / mitre / table saw." " Excellent build quality & so easy to manoeuvre with the table saw attached. Can be used without extending the legs if you want a lower working height." " Good solid base for table saw. Very clever & easy function."

Features: Suitable for many saws including the Dewalt DW744 & DW745 Heavy Duty Rolling Saw Workstation Large Heavy-Duty wheels designed to easily roll over steps, kerbs, & jobsite debris Folding legs with quick release levers which retract under the stand in a few seconds for easy & quick transport Lightweight aluminium construction which improves the portability Heavy-Duty kick stand allows the stand to balance upright for mobility & storage Retractable soft grip handle slides out allowing the user to pull the saw behind him comfortably Stand design allows portability when the table saw is attached to the stand which increases productivity Universal Brackets to attach most table saws PLEASE NOTE
- some drilling may be required to fit some saws to the workstation.


...

Dewalt DE7450 Heavy Duty Legstand for DCS7485 or DW745 Table Saws The dewalt DE7450 is a sturdy, height adjustable legstand designed to fit DCS7485 or DW745 Table Saws.

Features: Simple to use & does the job perfectly Heavy Duty all metal Stand Collapsable format for easy transportation Detachable leg extensions with rubber endcaps for different saw heights

...

Dewalt DFM424015P Wall Dog Chrome Countersunk Screws 32mm (Pack of 100) An all steel tension-free one piece threaded fastener. No pre-drilling required in wood or plasterboard. Pre-drill into stonework with 5mm drill.

Features: Patented, all steel, tension free, one piece, threaded fastener Multi-material usage: fixes to plasterboard, wood, concrete, s&-lime stone or brickwork NO PLUG required No pre-drilling required in wood & plasterboard Perfect for electrical sockets, switches, back boxes, cable clips, conduit & trunking Quantity: Pack of 100 Weight: 0.2kg

...

Dewalt DHS780T2 Mitre Saw 2 x 54V Flexvolt 305mm (2 x 6.0 Ah Batteries) The Dewalt DHS780T2 is an extremely powerful & versatile mitre saw which can be powered either through a mains switch or with 2 x 54V Flexvolt batteries. It features enhanced power & run-time thanks to its fully brushless motor. Boasting 244 cuts in 20 x 70mm softwood, this mitre saw is ideal for builders, roofing, flooring contractors, joinery, kitchen fitters & much more.  The built-in XPSTM LED Light improves cut-line visibility & accuracy. It's also 75% cleaner due to the well-designed dust collection system.

Features: This extremely versatile mitre saw can be powered by 2 x 54V batteries or mains power supply Outstanding cutting performance in both small profiles & large construction timbers up to 110 x 303 mm XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required Heavy-duty durability with the ability to fully adjust your machine to maintain accuracy over the life fo the tool. New quick release bevel stop setting provides an accurate & simple setting of bevel angles up to 49° left & right Easy to use mitre & bevel controls making the tool fast & simple to change from one set up to another Cam action mitre lock function makes mitre setting faster & easier allowing the user to quickly adjust angles between 0°
- 50° left & 0°
- 60° right The large dual sliding fence gives maximum support in large material cuts at any angle or combination of angles Linear horizontal rails utilise bronze guides to provide maximum precision when cutting materials up to 345 mm wide Compact & lightweight design characteristics deliver a saw with enormous capacity which is easy to transport around the job site Outstanding dust control & deflection away from cutting area The innovative grooving stop allows the adjustment of the cutting depth for grooving & rebating applications Comes With: DCB118 battery charger 2 x DCB546 18 / 54V XR FLEXVOLT 2.0 Ah / 6.0 Ah batteries DT99575 305 x 30mm x 60T XR FLEXVOLT 60 tooth blade



...

Dewalt DNBA1632-GZ 16GA Brad Finish Nail 20 Deg Galvanised 32mm (Pack of 2500) The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailers, ensuring fewer jamming or fitment issues.

Features: Galvanised nails reduce the likelihood of rust or staining High quality steel to ensure reliability in performance Contains 2500 angle brad nails

...

Dewalt DNBA1638-GZ 16GA Brad Finish Nail 20 Deg Galvanised 38mm (Pack of 2500) The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailers, ensuring fewer jamming or fitment issues.

Features: Galvanised nails reduce the likelihood of rust or staining High quality steel to ensure reliability in performance Contains 2500 angle brad nails

...

Dewalt DNBA1644GZ 16GA Brad Finish Nail 20 Deg Galvanised 44mm (Pack of 2500) The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailers, ensuring fewer jamming or fitment issues. The DNBA1644GZ nails replace DT9902-QZ.

Features: Galvanised nails reduce the likelihood of rust or staining High quality steel to ensure reliability in performance Contains 2500 angle brad nails

...