Dewalt DCJ069 XR Heated Work Jacket The Dewalt DCJ069 is a fantastic addition to the XR range of cordless tools & will keep you warm on the coldest of jobsites. The jacket can be powered from your 10.8v, 14.4v or 18v XR batteries.

Features: Durable water & wind resistant cotton twill outer shell providing protection from the elements 3 core heating zones
- left/right chest & middle back 3 temperature settings
- High/ Medium/ Low + pre-heat Battery pocket (accepts up to 5 Ah)
- battery (not provided) & USB (Universal Serial Bus) charger fit directly into adjustable pouch 4 pockets
- left chest pocket for charging mobile phone Comes with DCB091 battery adapter supplied comes with battery charge indicator & 2 USB (Universal Serial Bus) ports 4 Ah battery can provide up to 27 hours heat on low setting Comes with: DCB091 battery adapter with battery charge indicator & 2 USB (Universal Serial Bus) ports Battery or charger are not included [https://www.youtube.com/watch?v=RCCSd Je 2LQo] Battery chemistry: XR Li-Ion Voltage: 10.8/14.4/18 V Heat Zones: 3 Heat Settings: High/ Medium/ Low + Pre-Heat Shell

Material: Soft Shell Polyester Hood: No M: 38
- 40 L: 42
- 44 XL: 46
- 48 XXL: 50
- 52











...

Dewalt DCJ069 XR Heated Work Jacket The Dewalt DCJ069 is a fantastic addition to the XR range of cordless tools & will keep you warm on the coldest of jobsites. The jacket can be powered from your 10.8v, 14.4v or 18v XR batteries.

Features: Durable water & wind resistant cotton twill outer shell providing protection from the elements 3 core heating zones
- left/right chest & middle back 3 temperature settings
- High/ Medium/ Low + pre-heat Battery pocket (accepts up to 5 Ah)
- battery (not provided) & USB (Universal Serial Bus) charger fit directly into adjustable pouch 4 pockets
- left chest pocket for charging mobile phone Comes with DCB091 battery adapter supplied comes with battery charge indicator & 2 USB (Universal Serial Bus) ports 4 Ah battery can provide up to 27 hours heat on low setting Comes with: DCB091 battery adapter with battery charge indicator & 2 USB (Universal Serial Bus) ports Battery or charger are not included [https://www.youtube.com/watch?v=RCCSd Je 2LQo] Battery chemistry: XR Li-Ion Voltage: 10.8/14.4/18 V Heat Zones: 3 Heat Settings: High/ Medium/ Low + Pre-Heat Shell

Material: Soft Shell Polyester Hood: No M: 38
- 40 L: 42
- 44 XL: 46
- 48 XXL: 50
- 52











...

Dewalt DCK2055T2T-GB 18V DCD996 Hammer Drill Driver + DCG414 54V Flexvolt Angle Grinder (2 x 6.0 Ah Batteries) This DCK2055T2T Cordless Package from Dewalt consists of a DCD996 Hammer Drill Driver & a DCG414 Flexvolt Angle Grinder. This package comes with 2 x 6.0 Ah batteries & 2 heavy duty kit boxes. DCD996 Hammer Drill Driver

Features: All metal nitro-carburized chuck prolongs life as it is stronger & rust resitant Carbide inserts improve bit gripping strength & helps to minimise dropped bit frustrations 3 speed gearbox for a greater range of applications Larger brushless motor than previous model gives 34% increase in power enhanced air flow to the motor Hammer Function increases speed to 2250rpm
- Increased productivity Super bright LED with 3 LEDs which give a range from 2.6 to a massive 60 lumens DCG414 Flexvolt Angle Grinder

Features: 54V Brushless motor enables enhanced performance in demanding applications Electronic Brake stops the wheel quickly when the trigger is disengaged Electronic Clutch reduces the kickback reacton in the event of a pinch or stall Rubber overmold provides enhanced grip & comfort Recessed spindle lock design allows max depth of cut & greater protection to button when using in confined spaces Two position side handle offers greater comfort & control Comes With: DCD996
- Side handle DCG414
- 2 Position Side Handle, Keyless Protective Guard, Blade Wrench 2 x 6.0 Ah Batteries Multi-voltage charger 2 X Heavy duty kit box DCD996 Max Torque (Hard): 95 Nm Max Torque (Soft): 66 Nm Power Output: 830 Watt No Load Speed: 0-500/1500/2250 rpm Beats per Minute: 0-8600/25500/38250 bpm Chuck Capacity: 1.5-13 mm Max. Drilling Capacity (Wood): 55 mm Max. Drilling Capacity (Metal): 15 mm Max. Drilling Capacity (Masonry) 13 mm Length: 213 mm

Height: 208 mm

Width: 70 mm Sound Pressure: 97 d B (A) Sound Pressure Uncertainty: 3 d B (A) Sound Power: 108 d B (A) Sound Power Uncertainty: 3 d B (A) Hand/ Arm Vibration
- Drilling into metal: 2.5 m/s











...

Dewalt DCK2056T2T-GB 18V DCD996 Hammer Drill Driver + DCS575 54V Flexvolt Circular Saw (2 x 6.0 Ah Batteries) This DCK2056T2T Cordless Package from Dewalt consists of a DCD996 Hammer Drill Driver & a DCS575 Flexvolt Circular saw. This package comes with 2 x 6.0 Ah batteries & 2 heavy duty kit boxes. DCD996 Hammer Drill Driver

Features: All metal nitro-carburized chuck prolongs life as it is stronger & rust resitant Carbide inserts improve bit gripping strength & helps to minimise dropped bit frustrations 3 speed gearbox for a greater range of applications Larger brushless motor than previous model gives 34% increase in power enhanced air flow to the motor Hammer Function increases speed to 2250rpm
- Increased productivity Super bright LED with 3 LEDs which give a range from 2.6 to a massive 60 lumens DCS575 Circular Saw

Features: Scale for precise cutting depth setting to 67 mm General purpose ripping, cross-cutting & bevelling circular saw for wood & other construction materials High torque motor for durability & power for cutting job site & joinery materials Stable block construction for low vibration running & long service life Additional handle for safe two-handed work Variable adjustment of the bevel angle to 57 degrees Comes With: DCD996
- Side handle DCS575
- 24 tooth blade, rip fence, blade spanner, dust extraction spout 2 x 6.0 Ah 54V Batteries Multi-voltage charger 2 X Heavy duty kit box






...

Dewalt DCK2057T2T-GB 18V DCD996 Combi Drill Driver + DCS388 54V Flexvolt Reciprocating Saw (2 x 6.0 Ah Batteries) This DCK2057T2T Cordless Package from Dewalt consists of a DCD996 Combi Drill Driver & a DCS388 Flexvolt Reciprocating saw. This package comes with 2 x 6.0 Ah flexvolt batteries & a heavy duty kit box. DCD996 Combi Drill Driver

Features: All metal nitro-carburized chuck prolongs life as it is stronger & rust resitant Carbide inserts improve bit gripping strength & helps to minimise dropped bit frustrations 3 speed gearbox for a greater range of applications Larger brushless motor than previous model gives 34% increase in power enhanced air flow to the motor Hammer Function increases speed to 2250rpm
- Increased productivity Super bright LED with 3 LEDs which give a range from 2.6 to a massive 60 lumens DCS338 Reciprocating Saw

Features: Intelligent variable speed trigger & lock-off switch Two-position blade clamp allows for flush cutting & increased versatility Lever action keyless blade clamp for quick & easy blade change Pivoting shoe with open top for high stability & blade visibility during a cut LED for clear illumination cutline enhanced ergonomic design Pivoting shoe with open top for high stability & blade visibility during a cut




...

Dewalt DCK206M2T 18 Volt XR Lithium Ion 2-Speed Compact Combi Drill & SDS+ Hammer Drill complete with 2 x 4.0 Ah batteries, charger & Tstak Kitbox Contents DCD785 Compact Combination Drill DCH253 SDS Hammer Drill 2x 4.0 Ah Slide Pack Batteries Multi-voltage charger Tstak VI deep kitbox   DCD785 Compact Combi Drill

Features: Ultra compact, lightweight design allows use in confined spaces Two speed all metal transmission for increased runtime & longer tool life 14 position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes Intelligent trigger design allows for total control of application Compact 13mm single sleeve keyless chuck with automatic spindle lock for quick & easy bit change with one hand Bright white LED with delay feature for enhanced visibility & flashlight functionality enhanced ergonomic design & rubber grip improves user comfort Steel belt hook & magnetic bit holder ensures strong storage solutions DCH253 SDS+ Hammer Drill

Features: Ideal for drilling anchors & fixing holes into concrete, brick & masonry from 4mm to 24mm Rotation stop mode for light chiselling in plaster, tiles & render Best in class vibration, 6.6m/s_ reduces user fatigue & maximises operating periods Bright white LED with delay feature improves visibility & provides flashlight functionality Comes with: 2 x 4.0 Ah Li-ion Batteries with state of charge indicator Multi voltage battery charger Side handle & depth stop for DCH253 Tstak VI Kitbox



...

Dewalt DCK208D2T-GB G2 18V Twinpack DCD796 Combi Drill, DCS355 Multi-Tool, 2 x TSTAK Boxes (2 x 2.0 Ah Batteries) A great Twinpack from Dewalt with 2 tried & tested tools, the DCD796 Combi Drill & the DCS355 Multi-Tool with a 29 Piece accessory & 2 TSTAK Boxes. The Dewalt DCD796 features 2nd generation brushless technology for 30% more power & excellent efficiency. Drill length has also been reduced to 190mm for an even more compact feel. Sold without battery or charger in a cardboard box. The DCS355N oscillating multi-tool comes with cordless & brushless technology to give more control, more power & a faster speed of cut. Great for cutting in skirting or drywall, clean grout removal, cutting fabrics, flooring, pipes or timber, preparing surfaces, scraping or sanding. DCD796

Features: 18V XR Li-Ion compact hammer drill driver Brushless Motor Technology for excellent efficiency Ultra compact, lightweight design allows use in confined spaces Two speed all metal transmission for increased runtime & longer tool life Drill Driver & Hammer feature for multiple applications 15 position adjustable torque control for consistent screw driving into a variety of materials Intelligent trigger design allows for total control of application enhanced ergonomic design with rubber grip over mould improving users comfort enhanced air flow to the motor for cooler electronics & incrreased power 3 position super bright LED light
- SET 1 = LOW LIGHT LED on for 20s
- 2.6 Lumens
- SET 2 = MEDIUM LIGHT LED on for 20s
- 18 Lumens
- SET 3 = HIGH LIGHT LED on for 20min
- 60 Lumens Li-Ion battery packs allows for superior insertion & removal with state of charge indicator Part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster DCS355N

Features: Rubber over mould & ergonomic handle design enable comfortable use over extended periods A standard motor contains carbon brushes which generate friction, Dewalt XR Brushless motor eliminates this wasted energy, maximising the life & runtime of the tool
- also delivers up to 57% more run time over brushed motors A bright LED Light illuminates dark work surfaces for accurate cutting Unique quick change accessory system
- tool free & single handed operation Universal Accessory Adaptor for use with most oscillating tool accessory brands Comes With: Belt Hook 29 Piece accessory set including 31x 43mm wood with nails blade, 31x 43mm fast cut wood blade, sanding pad, 25 assorted sandpaper sheets & universal blade adapter DCD796: Max Torque (Hard): 70 Nm Max Torque (Soft): 27 Nm Power Output: 460 Watt No Load Speed: 0-550/2000 rpm Beats per Minute: 0-9350/34000 bpm Chuck Capacity: 1.5-13 mm Max. Drilling Capacity [ Wood]: 40 mm Max. Drilling Capacity [ Metal]: 13 mm Max. Drilling Capacity [ Masonry]: 13 mm Length: 174 mm

Height: 203 mm

Width: 67 mm Sound Pressure: 89 d B (A) Sound Pressure Uncertainty: 3 d B (A) Sound Power: 100 d B (A) Sound Power Uncertainty: 3 d B (A) Hand/ Arm Vibration
- Drilling into metal:
















...

Dewalt DCK211C2 10.8 Volt Cordless Compact Drill Driver & Impact Driver Twin Pack complete with 2 x 1.3 Ah Li-ion batteries, charger & kit bag. DCF815 Impact Driver

Features: Compact body enables operation in confined spaces & repetitive use with minimal fatigue Parabolic switch profile allowing for greater control over speed All metal gearing for efficient power transmission & long tool life 3 LED ' Halo' ring provides maximum illumination to work piece 6.35mm 'drop in' keyless hex driver allows for quick, one handed fitment Compact, durable design delivers 107 Nm of torque Aluminium front housing provides greater heat dispersion increasing motor life Ergonomic handle & rubber overmold reduces surface vibration & user fatigue Li-Ion slide pack battery allows for superior insertion & removal Li-Ion slide pack battery allows for tool to stand upright DCD710 Drill Driver

Features: Compact & lightweight design 15 Position adjustable torque control for consistent screw driving into a variety of materials with different screw sizes Ergonomic handle & rubber over mould to provide ultimate end user comfort Parabolic switch profile allowing for greater control over speed of application 10mm single sleeve keyless chuck with automatic spindle lock for quick & easy bit change Two speed settings, variable speed & reverse switch Electronic motor brake for added control High performance fan cooled motor for maximum power & durability All metal gearing for efficient power transmission & long tool life LED light for enhanced visibility Li-Ion slide pack battery allows for superior insertion & removal Li-Ion slide pack battery allows for tool to stand upright Comes with: 40 min charger 2 x 10.8V 1.3 Ah Li-Ion batteries Kit bag



...

Dewalt DCK211D2T 10.8 Volt Cordless Lithium Ion Compact Drill Driver & Impact Driver Twin Pack complete with 2 x 2.0 Ah Li-ion batteries, charger & TStak Kitbox Both these compact tools are designed to be light & manoeuverable for ease of access & low operator fatigue. This is further emphasised by the small 2.0 Ah battery packs supplied which judging by the reviews on this Twinpack have a more than ample runtime: " Good weight & balance, good run time for both drill & impact." " Easy to use very small & powerful ideal for building kitchen cabinets or tight placed." " Best thing I've ever bought." " Great drill. Easy to use. Very light. Comfortable in your h&." "I love it." DCD710 Drill Driver

Features: Compact, lightweight design 15 Position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes 10mm Single sleeve keyless chuck with automatic spindle lock for quick & easy bit change Two speed settings, variable speed & reverse switch All metal gearing for efficient power transmission & long tool life LED light for enhanced visibility DCF815 Impact Driver

Features: Compact, durable design delivers 107 Nm of torque All metal gearing for efficient power transmission & long tool life Aluminium front housing provides greater heat dispersion increasing motor life 6.35mm 'drop in' keyless hex driver allows for quick, one handed fitment 3 LED ' Halo' ring provides maximum illumination to work piece Comes with: Multi Voltage XR charger 2 x 10.8V 2 Ah Li-Ion batteries TStak V clear lid kitbox



...

Dewalt DCK215D2T Drill Driver & Laser 10.8V XR Cordless Twinpack (2 x 2.0 Ah Batteries) A great Cordless Package from Dewalt which consists of the DCD710 Drill Driver & the DCE088R Laser with 2 x 2.0 Ah Batteries & a Carry Case. The DCD710 has all metal gearing & is small enough at 185mm in length for most confined spaces. Light enough to operate for long periods without fatigue. They say great things can come in small packages, this machine punches way above its weight. The Dewalt DCE088R follows on from the DW088K with the added advantage of 2.0 Ah battery power. It is fitted with a locking pendulum which helps to prevent damage to internal components & there is an integrated magnetic pivoting base. A rubberised overmould absorbs the knocks & this tough laser is drop tested to 2 metres. Achieve a professional outcome with this accurate & precise laser. DCD710

Features: 10.8V XR Li-Ion compact drill driver featuring XR 1.3 Ah Li-Ion battery technology Compact & lightweight design 15 Position adjustable torque control for consistent screw driving into a variety of materials with different screw sizes Ergonomic handle & rubber over mould to provide ultimate end user comfort Parabolic switch profile allowing for greater control over speed of application 10mm single sleeve keyless chuck with automatic spindle lock for quick & easy bit change Two speed settings, variable speed & reverse switch Electronic motor brake for added control High performance fan cooled motor for maximum power & durability All metal gearing for efficient power transmission & long tool life LED light for enhanced visibility DCE088R

Features: Self Leveling Cross Line Laser Red Beam Laser 20m working range (50m with detector) Wear resistant, overmold IP65/2m drop tested Comes with: DCB115 charger 2 x 10.8V 2.0 Ah li-ion batteries Wall mount bracket Kitbox DCD710 Battery chemistry: XR Li-Ion Voltage: 10.8 V Max Torque: (Hard) 24 Nm Max Torque: (Soft) 15 Nm Power Output: 180 Watt No Load Speed: 0-400/1500 rpm Chuck Capacity: 1.5-10 mm Max. Drilling Capacity: [ Wood] 20 mm Max. Drilling Capacity: [ Metal] 10 mm Length: 185 mm

Height: 170 mm

Depth: 50 mm Sound Pressure: 65 d B (A) Sound Pressure: Uncertainty 3 d B (A) Sound Power: 76 d B (A) Sound Power Uncertainty: 3 d B (A) Hand/ Arm Vibration
- Screw driving without impact:








...