Makita DHR242Z 18 Volt LXT lithium ion SDS Plus Brushless 3 Mode Rotary Hammer Drill
- Body Only The Makita DHR242 is a high performance
...

Makita DHR242Z 18 volt li-ion SDS+ Rotary Hammer
- Body Only with Makita D-21200 17 Piece SDS Drilling & Chiselling Accessory Set
...

Makita DHR243RMJ 18V li-ion SDS+ Brushless 3 Mode Rotary Hammer Drill 24mm with Quick Change Chuck (2 x 4.0 Ah Batteries) The Makita DHR243 SDS+ Brushless ROTARY HAMMER with it's quick change chuck means that you can easily go between SDS+ drill bits & straight shank drill bits. It features strong effective performance combined with ergonomic design. Built with the operator in mind the DHR243 has a centre of gravity closer to the vibration absorbing handle, this design gives unrivalled tool balance which in turn reduces the operators fatigue & gives a more productive working day.

Features: Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200. With Quick Change Chuck Easy-to-grip handle ergonomically designed to:
- give maximum power thrust.
- provide a sure & comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip. 3 mode operation
- Rotation + Hammering
- Hammering only
- Rotation only The tool body is seperated into the upper & lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. Comes With: 2 x BL1840 18V batteries Makpac connector case (TYPE 4) Inner tray DC18RC compact charger Depth stop Side handle Quick change chuck Quick change standard 13mm chuck    






...

Makita DHR243RMJV 18V li-ion SDS+ Brushless 3 Mode Rotary Hammer Drill 24mm with Quick Change Chuck + DX02 Dust Extraction System, Makstar Charger, 2 x 4 Ah Batteries, Makpac Carry Case, Depth Gauge & Side Handle The Makita DHR243 SDS+ Brushless ROTARY HAMMER with it's quick change chuck means that you can easily go between SDS+ drill bits & straight shank drill bits. It features strong effective performance combined with ergonomic design. Built with the operator in mind the DHR243 has a centre of gravity closer to the vibration absorbing handle, this design gives unrivalled tool balance which in turn reduces the operators fatigue & gives a more productive working day. DHR243

Features: Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200. With Quick Change Chuck Easy-to-grip handle ergonomically designed to:
- give maximum power thrust.
- provide a sure & comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip. 3 mode operation
- Rotation + Hammering
- Hammering only
- Rotation only The tool body is seperated into the upper & lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact DX02

Features: Designed to collect dust effectively with automatic operation from the tools on/off trigger switch HEPA Filter: widely regarded as the ultimate filter that traps all sizes of particles with an efficiency rating of 99.75% Large dust box cover can be opened by pushing a single button Dust extraction inlet is adjustable according to the size of the drill bit length Comes With: 2 x BL1840 18V batteries Makpac connector case (TYPE 4) Inner tray DC18RC compact charger Depth stop Side handle Quick change chuck Quick change standard 13mm chuck Machine compatible with Makita BL1830, BL1840 & BL1850 batteries       Max in Steel: 13mm Max in Wood: 27mm Max in Concrete: 24mm No Load Speed: 0-950rpm Blows per minute: 0-4, 700bpm Single impact energy: 2.4J Vibration: 15/sec 2 Charging Time: Approx 22 min Net Weight: 3.3kg








...

Makita DHR243Z 18 Volt LXT Lithium Ion SDS Plus Brushless 3 Mode Rotary Hammer Drill with 2 Chucks
- Body Only The Makita DHR243
...

Makita DHR264Z 36V Cordless SDS+ li-ion Rotary Hammer (Body Only) without carry case
- accepts 2 x 18V Batteries (not included)
...

Makita DHR264ZJ 36V Cordless SDS+ li-ion Rotary Hammer with Quick Change Chuck
- Body Only The Makita DHR264ZJ is a 26mm cordless
...

Makita DHS630Z 18V Cordless LXT Circular Saw 165mm (Body Only) The Makita DHS630 is a 165mm / 6. 1/2 Inch Cordless Circular Saw powered by an 18V Li-ion battery (not included). The 730W motor is able to cut up to 66mm / 2-5/8 Inch thick wood with a single stroke. A lightweight tool with good balance & high manoeuvrability, twin LED light, blower function & parallel adjustment of the base plate. Sold without Charger or Battery in a cardboard carton. Comes with 165mm Blade for wood.

Features: Light weight at only 3.5kg Twin LED job light Blower function
- blows sawdust off the line cut New compact charger Rear dust exhaust port Electric Brake Joblight Lithium-ion battery, lighter weight, quicker charging & with more run time than an equal voltage Ni-Cad or Ni-MH battery. Comes With: Hex wrench Rip fence (Guide rule) TCT saw blade


...

Makita DHS680 Circular Saw 165mm with DC18RC Charger in Makpac Case (2 x 3.0 Ah Batteries) This e Xclusive Toolstop deal consists of the 165mm 18V Cordless Brushless DHS680 Circular Saw, DC18RC single charger & 2 BL1830B 3.0 Ah Batteries all stored in a Makpac Connector Case Type 3. The DHS680 circular saw has a high efficiency brushless motor which provides higher power. It boasts an impressive no load speed of 5000rpm to the 165mm blade. DHS680

Features: Bevel cuts up to 50° Automatic Speed Control Electric brake Soft start Electronic current limiter for overload protection Tool Hanger Twin LED job light LED indicator panel with 3 LED's has 3 funtions. 1
- monitor battery power remaining, 2
- indication of automatic speed control, 3
- indication of overload protection activation Rear dust exhaust port Large lock off lever Compact & lightweight design is achieved by downsizing the motor & better placement of parts & by using durable but light magnesium die-cast for base, blade case & safety cover Ergonomic soft grip handle Blower function to clear wood dust from cutting line BL1830B

Features: Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated    








...

Makita DHS680Z 18V Cordless Lithium Ion Brushless Circular Saw
- Body Only The Makita DHS680 circular saw has a high efficiency
...