Arbortech AS160 Allsaw Brick & Mortar Saw The award-winning AS160 Brick + Mortar Saw featuring Allsaw Technology TM represents a revolution in cutting technology. Using a unique patented orbital cutting motion with two forward facing blades that combine to perform both a hammering & cutting action, the AS160 Brick + Mortar Saw allows for clear visibility & empowers the professional with the ability cut square, cut deep, cut dry & cut safe with no flydust. The AS160 offers extreme levels of precision, accuracy & control allowing the tool to be used for a wide range of applications, from heritage masonry work to electrical installations.

Features: Cuts Fast
- Save time on chiselling, cleaning & rendering by cutting square to full depth of cut. The AS60 cuts faster than any existing reciprocating saw & as fast as most small angle grinders Visibility
- The unique blade position allows clear visibility of the material while cutting Cuts Square
- The AS160 is able to cut square corners, requiring no over cutting, or bolstering Plunge Cuts
- Use the AS160 to cut directly into flush walls without stitch drillng Cuts Safe
- Unlike conventional disc cutters, the AS160 does not generate flydust, & because it is belt driven theere is no kickback Cuts Dry
- Cuts masonry materials with significantly less respirable dust than disc cutters Cuts Deep
- The AS160 is the only small, handheld saw able to cut to depths of 120mm/4-3/4" (Plunge blade) in masonry materials Renovation, Restoration & Repair: The Arbortech AS160 Brick + Mortar Saw is an ideal tool for both trade professionals & DIY enthusiasts, as it covers a wide range of renovation, restoration & repair work: Housing repairs & re-pointing Extensions & additions Renovations & alterations Chimney repair & restoration These are some of the ideal applications for the AS160: Toothing brickwork for extensions Tuckpointing Fast removal of in-built objects such as anchors, wall plates, joists, trusses, frames, sills, beams, lintels, wall units & steps Expansion joints & wall section replacement Removal of in-built furniture, plumbing & vanities Cutting of archways & windows Installations: Vents Ducts Registers Plumbing Electrical cabling, conduit & switch boxes Electrical goods Windows Ablutions Lighting Waste units A/C units Cutting material guide: Building

Material: Bricks (up to 50 M Pa) Mortar Fibre Cement Fast Block Rock: Soft Sandstone Natural Limestone Soft to Medium Stone Wood (blades optional extra): Hard Wood Chip or Ply wood Dirty wood Tree roots in the ground Plastics: Foam PVC Acrylic Fibreglass Sheet Comes with: 1x pair General Purpose blades 1x pair of plunge blades Hard plastic moulded carry case [http://www.youtube.com/watch?v=ai CJAuczv M4] Cutting

Width: 6.5mm/7.2mm, depending on blades Weight, with cutting blades: 4.3kg (9.5lb)

Dimensions without blades: 345 mm (13 1/2") Length, 75 mm (3") Width, 210 mm (8 1/4") Height Noise level: 96 d B at 1.0 m No load speed: 6, 500rpm Dust extraction vacuum hose interface: 30mm ID, EN 60335-2-69 Belt tension: 1mm (1/16") maximum mid-span deflection with 25 N (2.5kg) deflection force Blade mount bolt torque: 16 N-m (1.6 kg-m), (11.5 ft-lb), un-lubricated CE Compliance: EN 50144-1:1999 incl. Amdt 1, & EN 50144 2-11:1997 Power input: 900w














...

Arbortech AS170-HJ Allsaw Brick & Mortar Saw with Kitbag & 3 Blades This Toolstop exclusive features the AS170 Allsaw with a plastic carry case & 3 sets of blades. The Arbortech AS170 provides a virtually dust free, precise & safe job with the added benefit of a 1250 watt motor 40% more power then the previous as 160 model

Features: The AS170 Brick & Mortar Saw with Allsaw Technology represents a revolution in cutting technology. Now with new heavy duty 13 Amp motor, Vibration reducing handle & Ergonomic slim grip handle Using a unique orbital cutting motion with two forward facing blades that combine to perform both a hammering & cutting action, the AS170 Saw allows for clear visibility & empowers the user with the ability to cut square, cut deep, cut dry & cut safe with little dust The AS170 offers extreme levels of precision, accuracy & control allowing the tool to be used for a weide range of applications The AS170 cuts faster than any existing reciprocating saw & as fast as most small angle grinders Cut Deep
- The Arbortech AS170 is the only small, handheld saw that is able to cut to depths of 120mm (Plunge blade) in masonry materials Cut Square
- The Arbortech AS170 is able to cut square corners, requiring no over-cutting or bolstering Cut Dry
- The Arbortech AS170 can cut masonry materials dry with significantly less dust than disc cutters Cut Safe
- Does not throw dust & there is no kickback The AS170 brick + mortar saw is ideal tool for trade professionals as it covers a wide range of renovation, restoration & repair work: Housing repairs & re-pointing Extensions & additions Renovations & alterations Chimney repair & restoration Some of the ideal applications for the Arbortech AS170 are: Toothing brickwork for extensions Tuck pointing Fast removal on in-built objects such as anchors, wall plates, joists, trusses, frames, sills, beams, lintels, wall units & steps Expansion joints & wall section replacement Removal of in-built furniture, plumbing & vanities Cutting of archways & windows Comes with: Heavy Duty Nylon Carry Case General Purpose Blades Plunge Blades Repointing Blades Spare Belt Vacuum Adaptor [http://www.youtube.com/watch?v=r Avzob 2R60k] Cutting

Width: 6.5mm/7.2mm, depending on blades Weight, with cutting blades: 4.3kg (9.5lb)

Dimensions without blades: 345 mm (13 1/2") Length, 75 mm (3") Width, 210 mm (8 1/4") Height Noise level: 96 d B at 1.0 m No load speed: 6, 500rpm Dust extraction vacuum hose interface: 30mm ID, EN 60335-2-69 Belt tension: 1mm (1/16") maximum mid-span deflection with 25 N (2.5kg) deflection force Blade mount bolt torque: 16 N-m (1.6 kg-m), (11.5 ft-lb), un-lubricated CE Compliance: EN 50144-1:1999 incl. Amdt 1, & EN 50144 2-11:1997 Power input: 1250w Available Blades: BL170GHP GENERAL PURPOSE BLADE Brick & mortar cutting, ideal for raking out mortar & cutting openings through brickwork BL170PHP PLUNGE BLADE Brick & mortar cutting, Ideal for fast single brick removal, raking out mortar in purp-joints & cutting small openings through brickwork BL170 HJ TCT HEAD JOINT BLADE Head Joint Blades D: 65mm W:7.2mm For raking out mortar from standard mortar joints in brick & stonework to a max. of 65mm. Ideal for structural bar installations BL170S HP SWITCH-BOX BLADE High Performance TCT Switchbox Blades D:115mm W:7.2mm For making smaller plunge cuts e.g for electrical switchboxes or around handmade bricks with smaller perp-ends BL150 W HSS WOOD BLADE Wood blades D: 110mm W:6.5mm The wood blades are used for cutting clean wood BL170 HN TCT HERITAGE BLADE Heritage Narrow Blades D: 30mm W:3.2mm For raking out mortar from fine joints in brick or stonework BL170 CR CAULKING REMOVAL BLADE The blades adjust to the width of the gap & cut clean out all the old joint material to the leave surface ready for a replacement filler BL170 OS HP OFFSET BLADE High Performance Offset Plunge Blades For general cutting of bricks & mortar. Designed for cutting into tight corners. Use this blade for brickwork repair BL170G XL XL GENERAL PURPOSE BLADE High Performance TCT General Purpose Blades D:170mm W:7.2mm For general cutting of brick & mortar up to 170mm depth. They can also be used for cutting exposed tree-roots, wood, plastic & soft stone BL170W XL HSS XL WOOD BLADE High Speed Steel Wood blades D: 170mm W:6.5mm The wood blades are used for cutting clean wood









...

Arbortech AS170-HJ Allsaw Brick & Mortar Saw with Kitbag & 3 Blades This Toolstop exclusive features the AS170 Allsaw with a plastic carry case & 3 sets of blades. The Arbortech AS170 provides a virtually dust free, precise & safe job with the added benefit of a 1250 watt motor 40% more power then the previous as 160 model

Features: The AS170 Brick & Mortar Saw with Allsaw Technology represents a revolution in cutting technology. Now with new heavy duty 13 Amp motor, Vibration reducing handle & Ergonomic slim grip handle Using a unique orbital cutting motion with two forward facing blades that combine to perform both a hammering & cutting action, the AS170 Saw allows for clear visibility & empowers the user with the ability to cut square, cut deep, cut dry & cut safe with little dust The AS170 offers extreme levels of precision, accuracy & control allowing the tool to be used for a weide range of applications The AS170 cuts faster than any existing reciprocating saw & as fast as most small angle grinders Cut Deep
- The Arbortech AS170 is the only small, handheld saw that is able to cut to depths of 120mm (Plunge blade) in masonry materials Cut Square
- The Arbortech AS170 is able to cut square corners, requiring no over-cutting or bolstering Cut Dry
- The Arbortech AS170 can cut masonry materials dry with significantly less dust than disc cutters Cut Safe
- Does not throw dust & there is no kickback The AS170 brick + mortar saw is ideal tool for trade professionals as it covers a wide range of renovation, restoration & repair work: Housing repairs & re-pointing Extensions & additions Renovations & alterations Chimney repair & restoration Some of the ideal applications for the Arbortech AS170 are: Toothing brickwork for extensions Tuck pointing Fast removal on in-built objects such as anchors, wall plates, joists, trusses, frames, sills, beams, lintels, wall units & steps Expansion joints & wall section replacement Removal of in-built furniture, plumbing & vanities Cutting of archways & windows Comes with: Heavy Duty Nylon Carry Case General Purpose Blades Plunge Blades Repointing Blades Spare Belt Vacuum Adaptor [http://www.youtube.com/watch?v=r Avzob 2R60k] Cutting

Width: 6.5mm/7.2mm, depending on blades Weight, with cutting blades: 4.3kg (9.5lb)

Dimensions without blades: 345 mm (13 1/2") Length, 75 mm (3") Width, 210 mm (8 1/4") Height Noise level: 96 d B at 1.0 m No load speed: 6, 500rpm Dust extraction vacuum hose interface: 30mm ID, EN 60335-2-69 Belt tension: 1mm (1/16") maximum mid-span deflection with 25 N (2.5kg) deflection force Blade mount bolt torque: 16 N-m (1.6 kg-m), (11.5 ft-lb), un-lubricated CE Compliance: EN 50144-1:1999 incl. Amdt 1, & EN 50144 2-11:1997 Power input: 1250w Available Blades: BL170GHP GENERAL PURPOSE BLADE Brick & mortar cutting, ideal for raking out mortar & cutting openings through brickwork BL170PHP PLUNGE BLADE Brick & mortar cutting, Ideal for fast single brick removal, raking out mortar in purp-joints & cutting small openings through brickwork BL170 HJ TCT HEAD JOINT BLADE Head Joint Blades D: 65mm W:7.2mm For raking out mortar from standard mortar joints in brick & stonework to a max. of 65mm. Ideal for structural bar installations BL170S HP SWITCH-BOX BLADE High Performance TCT Switchbox Blades D:115mm W:7.2mm For making smaller plunge cuts e.g for electrical switchboxes or around handmade bricks with smaller perp-ends BL150 W HSS WOOD BLADE Wood blades D: 110mm W:6.5mm The wood blades are used for cutting clean wood BL170 HN TCT HERITAGE BLADE Heritage Narrow Blades D: 30mm W:3.2mm For raking out mortar from fine joints in brick or stonework BL170 CR CAULKING REMOVAL BLADE The blades adjust to the width of the gap & cut clean out all the old joint material to the leave surface ready for a replacement filler BL170 OS HP OFFSET BLADE High Performance Offset Plunge Blades For general cutting of bricks & mortar. Designed for cutting into tight corners. Use this blade for brickwork repair BL170G XL XL GENERAL PURPOSE BLADE High Performance TCT General Purpose Blades D:170mm W:7.2mm For general cutting of brick & mortar up to 170mm depth. They can also be used for cutting exposed tree-roots, wood, plastic & soft stone BL170W XL HSS XL WOOD BLADE High Speed Steel Wood blades D: 170mm W:6.5mm The wood blades are used for cutting clean wood









...

Arbortech BL170GHP Hi-Performance General Purpose Tungsten Carbide Tipped Blades

Features: Chasing work, cuts

...

Aresta MEWP Kit 1
- Single Point Harness, Adjustable Webbing Lanyard, 2 x Carabiner The Aresta MEWP Kit 1 contains: ARESTA AR-01011
...

Aresta Scaffolder Kit 2
- Double Point Harness, Elasticated Webbing Lanyard The Aresta Scaffolder Kit 2 contains: ARESTA AR-01024
...

Aresta Scaffolder Kit 6
- Double Point Harness, Elasticated Webbing Lanyard & Kitbag The Aresta Scaffolder Kit 6 contains: ARESTA
...

Armogard FB1 Flambank Hazard Vault 96.5 cm x 54 cm x 47.5 cm The ultra-tough Armorgard FB1 lockable vault for storing hazardous chemicals & flammables. Built to the same high

Specification as our renowned Tuff Bank Armorgard Flam Bank is specially designed to comply with all relevant COSHH regulations, ensuring that your hazardous substances are securely protected 24/7.

Features: Keyed alike 5-lever deadlocks both sides, with heavy-duty chubb-style keys, welded security ID numbers & 6mm reinforcement around the lock Built to

Specification for 1/2 hour fire resistant Strong gas struts & safety catch fitted as standard- conform to industry standards Suitable for chemicals or flammables Finished in bright red with relevant hazard warning signs fitted as standard Fully welded & tested sump base to prevent leakage High & low level ventilation to prevent build-up of fumes Flame arrester gauze fitted on all ventilation Robust steel plate construction & powder coated for maximum durability Toolstop holds stock of this item at the Armorgard UK Distribution Centre. We guarantee this item is in stock & will be delivered within 3 days. Dimensions: External: 980x 540x 475 Internal: 895x 470x 465 Sump Capacity: 60





...

Armogard TSC1 Tuffstor Cabinet 50 cm x 50 cm x 90 cm The TSC1 is the ultra-tough cabinet from Armorgard that keeps your equipment organised & accessible. Tuff Stor Cabinet™ offers the same level of security as a conventional site safe, but with the advantage of using less floor space, making your tools & equipment easier to access. This versatile high-security cabinet Is ideal to be used in both workshops & vehicles
- or simply add castors using the pre-drilled holes & wheel it wherever you like.

Features: Fully adjustable shelves fitted on all sizes Powder coated for maximum durability Heavy duty doors with fixed hinges & concealed anti-jemmy system Fork skids with fixing slots for easily adding castors Robust construction for maximum protection Toolstop holds stock of this item at the Armorgard UK Distribution Centre. We guarantee this item is in stock & will be delivered within 3 days. Dimensions: External: 500 x 530 x 980mm Internal: 490 x 465 x 895mm


...

Armorgard BH1080 Tuff Bench Heavy Duty Folding Work Platform 1080mm x 750mm x 820mm The BH1080 Folding Workbench from Armorgard is easy to use & versatile. This workbench is designed for contractors on the move, & is perfect for use on construction sites. Its quick & easy assembly system
- with no detachable parts
- makes it easy to transport & Store. Durable & built to last, the surface is manufactured from sustainable pressed timber, & is ideal to be used with attachments such as power tools, vices & pipe threaders.

Features: Ideal for fitting a chain vice & engineers vice to Folds down for easy storage & easier transportation around the worksite Folding legs secured with a chain when shut Has a sustainable surface which is manufactured from pressed timber & designed to be long lasting, making it simple to attach working tools Velco strap for holiding legs whilst in the folded position No detachable parts Durable timber work surface & powder coated frame, to maximise the product usability Metal edge, flush with wooden work surface Ideal for fitment of a chain vice or engineers vice Toolstop holds stock of this item at the Armorgard UK Distribution Centre. We guarantee this item is in stock & will be delivered within 3 days. Internal dimensions: Folded Down = 1080x 750x 130 External

Dimensions (including protrusions): 1080x 750x 820

Colour: Black & Timber Finished Coating: Powder Coat with anticorrosive undercoat, & compressed timber work surface

Material: Steel & Timber Material Thickness: Top = 25mm, Tube = 36mm diameter Weight: 28kg









...