BAL Prime APD Primer is used in the preparation of wall & floor backgrounds prior to the application of any levelling compounds & the BAL WP1 Waterproof tanking Kit. BAL Prime APD Primer is a modified acrylic polymer dispersion which isolates products contain calcium sulphate. Gypsum plaster, anhydrite screeds, & cement-based adhesives may contain calcium sulphate. The BAL Prime APD Primer minimises the risk of reaction between the two materials & provides surface strength to friable surfaces. It reduces porosity
- preventing air bubbles & prolonging the flow time of levelling compounds & extending the open time of tile adhesives. Key features & benefits include: Pack

Size: 2.5L Coverage: Undiluted: 100-200ml/m 2, Diluted (1:1): 50-100ml/m 2 Drying time: 15-30 minutes

Colour: Blue, ensuring a complete & even coating is obtained Recommendations for BAL Prime APD Primer Diluted usage (1:1): Use the diluted primer on dusty or porous plaster walls (when using BAL ready-mixed




...

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems & with minimal mat compression, BAL Rapid-Mat is lightweight & easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation & new construction, domestic & commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors & timber floors. Reduce project costs with BAL Rapid-Mat, which lays down a new benchmark in uncoupling systems. This innovative product requires 20% less adhesive than cavity uncoupling systems. This saving amounts to 1.5kg less adhesive per square metre, a major saving of 45kg per 30m roll. BAL Rapid-Mat saves more time on-site by being simpler & faster to lay than other mats. Its super-slim lightweight profile makes it easy to roll out & mesaure, ...

BAL Rapid-Flex One is enhanced with Fibre Strand Technology (FST) which gives it enhanced flexibility & strength. It has an extended open time of 30 minutes & working time of 60 minutes, & can be grouted after only three hours. It can be used on walls & floors, internally & externally, & has a smoother consistence for easier mixing & application. The S1 classified adhesive can be used to fix most types of tiles & natural stone as well as rigid foam insulation materials & brick slips. BAL Rapid-Flex One is available in white but can be used with any colour grout. A true rapid-setting adhesive, BAL Rapid-Flex One allows for fast grouting, producing significant time savings for the tiler at no extra cost. An extended pot life of 60 minutes allows applications of adhesive to larger areas for easier tile adjustment & reduced installation time. With its working time also extended, fixers can use larger mixes reducing costs for the customer & allowing more jobs to be ...

Adhesive Calculator Calculate = Add to Basket config = { calculator: 'adhesive-cal', coverage: 1.25, label: 'bags',



...

BAL Single Part Flexible is a highly flexible, polymer modified wall & floor tile adhesive. It has excellent adhesive & non-slip properties which makes it absolutely ideal for fixing large format wall tiles in wet rooms, bathrooms, showers & total immersion areas such as swimming pools. BAL Single Part Flexible has enhanced adhesion to fully vitrified/porcelain tiles & low porosity substrates. The high level of flexibility allows this tile adhesive to work for installations that are subject to vibration, shrinkage, or deflection from the substrate. Key features & benefits include: Quantity: 50 bags Coverage: Floor
- Approx. 5.3m 2, Wall
- Approx. 8-10m 2

Colour: Grey / White Pack

Size: 20kg Setting time: 16 hours Suitability: Suitable for use in wet & dry areas & for internal & external environments Use with underfloor heating
- Yes Water & frost resistant Ideal for fixing ceramics, porcelain, fully vitrified mosaics, some natural stone (including marble), terrazzo,






...

BAL WP1 Tanking Coating is a light grey, flexible, & seamless waterproof tanking system. It is comprised of an acrylic-based flexible coating that is to be used in conjunction with WP1 Polyester Tape, WP1 Polyester Matting, & BAL WP1 Waterproofing Kit. The BAL WP1 Tanking Coating provides total waterproof protection of substrates prior to fixing wall & floor tiles in wet or dry interior environments. Key features & benefits include: Coverage: 8m 2 Setting Time: 3 hours Drying Time: 24 hours Suitability: Suitable for use on concrete, brick & block work, partition walls, timber floors, paster, plasterboard, plywood, glazed tiles, cement, plywood overlays, & suspended floors Recommendations for BAL WP1 Tanking Coating This coating is recommended for use in showers, bathrooms, kitchens, laundry & utility rooms, upstands, pipes, & floor wastes. It can be used on areas where movement may occur, such as drainage channels & junctions between walls & floors. ...

BAL WP1 Polyester Matting is used as a reinforcement tool for use when undertaking the waterproof tanking process. The matting makes any areas with uneven surfaces even enough to work on when waterproofing. All products mentioned above work together to provide waterproof protection to substrates prior to fixing wall & floor tiles in wet or dry interior environments. Key features & benefits include:

Size: 1m x 1m polyester mat Suitability: Suitable for use on concrete, brick & block work, partition walls, timber floors, paster, plasterboard, plywood, glazed tiles, cement, plywood overlays, & suspended floors Capable of bridging gaps up to 1.5mm when making uneven surfaces workable Cuts easily to the desired shape & size Recommendations for BAL WP1 Polyester Matting The BAL WP1 Polyester Matting is recommended for use in heavy-duty wet areas such as communal showers & industrial wet process areas. Also, the matting can be used where some vibration or defection in the base may

...

This kit contains: BAL prime APD 500ml BAL WP1 waterproof coating 4.5kg 10m BAL WP1 polyester tape BAL WP1 polyester mate 1m 2 Full instructions BAL WP1 Waterproofing Kit is a flexible, seamless, & complete waterproof tanking system. It

Includes:: an acrylic based flexible WP1 Tanking Coating, WP1 Polyester Tape, WP1 Polyester Matting, & APD Acrylic Primer. The BAL WP1 Waterproofing Kit provides complete waterproof protection of substrates prior to fixing wall & floor tiles in wet or dry interior environments. Key features & benefits include: Coverage: 4.5m 2 Setting Time: 3 hours Drying Time: 24 hours Suitability: Suitable for use on concrete, brick & block work, partition walls, timber floors, plaster, plasterboard, plywood, glazed tiles, cement, plywood overlays, & suspended floors Can be used on areas where movement may occur such as drainage channels & junctions between walls & floors Recommendations for BAL WP1 Waterproofing Kit The BAL WP1 Waterproofing Kit is

...

This 1 inch, nickel plated ball valve set including Temperature gauges, supplied as a red/blue pair, is set for use with most manifolds. ...

Basic 6mm notched trowel with plastic handle. Suitable for use with most floor & wall tiles. ...