The Rome Ravine is back with a new shaped for 2021 with increased float in powder & a little bit less taper to the shape. The Ravine is your all terrain powder board which can tear up any part of the mountain, the Ravine plays with ease, & carves beautifully.  The Ravine uses Romes Free the ride 3d camber profile that is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point is a mellow flat camber. This then moves into a reverse camber nose with 3D base bevel to give the nose a spoon shape. To translate that into performance terms it has a lot of power in the back with a mellow front & a nose which wont catch or dive under in deep snow. With the addition of the Directional Diamond 3D shaped nose, the Ravine gives you increase float in deep snow, improve handling in variable terrain, smooth turn initiation, reduce edge catch & complement all-mountain riding in all-senses. To add to this Rome put a 7.5mm taper in the board on all sizes. This accentuates the livelyness & power you can drive through the back foot & also makes the back of the board more nimble rather than being wider like the rest of the board. The width does come into play when taking this one off piste aiding float no end &, your choice, does enable you to ride this board a size smaller if you want a quicker edge to edge turn. The Carbon Hot rods in the tail round this one off with some expolsive pop whether it is in & out of truns or popping off a fresh pillow line in the trees. This one became an instant favourite of ours for all of the right reasons & we like it even more with the new shape. Go charge the mountain, kick up some over head powder truns & carve like hell on the Rome Ravine!   ...

The Rome Ravine is back with a new shaped for 2021 with increased float in powder & a little bit less taper to the shape. The Ravine is your all terrain powder board which can tear up any part of the mountain, the Ravine plays with ease, & carves beautifully.  The Ravine uses Romes Free the ride 3d camber profile that is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point is a mellow flat camber. This then moves into a reverse camber nose with 3D base bevel to give the nose a spoon shape. To translate that into performance terms it has a lot of power in the back with a mellow front & a nose which wont catch or dive under in deep snow. With the addition of the Directional Diamond 3D shaped nose, the Ravine gives you increase float in deep snow, improve handling in variable terrain, smooth turn initiation, reduce edge catch & complement all-mountain riding in all-senses. To add to this Rome put a 7.5mm taper in the board on all sizes. This accentuates the livelyness & power you can drive through the back foot & also makes the back of the board more nimble rather than being wider like the rest of the board. The width does come into play when taking this one off piste aiding float no end &, your choice, does enable you to ride this board a size smaller if you want a quicker edge to edge turn. The Carbon Hot rods in the tail round this one off with some expolsive pop whether it is in & out of truns or popping off a fresh pillow line in the trees. This one became an instant favourite of ours for all of the right reasons & we like it even more with the new shape. Go charge the mountain, kick up some over head powder truns & carve like hell on the Rome Ravine!   ...

The Rome Ravine Selekt is a brand new board in the range. Based on the Ravine board with the same shape & camber profile, but with different core materials & additives. The Ravine Select is a stiffer & more powerful version of the Rome Ravine. The Ravine Select is designed for the aggressive rider who want to charge down the mountain & float with ease in the deeper snow.  The Rome Ravine Selekt uses Romes Free the ride 3D camber which is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point, is a mellow flat camber. This then moves into a reverse camber nose with the all new Directional Diamond 3D base bevel to give the nose a extra spoon shape. To translate that into performance terms it has a lot of power in the back with a mellow front & a big floaty nose which wont catch or dive under in deep snow. To add to this Rome put a taper in the board of 7.5mm depending on size. This accentuates the livelyness & power you can drive through the back foot & also makes the back of the board more nimble rather than being wider like the rest of the board. The width does come into play when taking this one off piste aiding float no end &, your choice, does enable you to ride this board a size smaller if you do so wish. The Carbon Omega Hotrods in the tail makes the Ravine Select much stiffer & with impact plates, Superpop core & Sinterspeed base you will be chargning down the mountain with a big smile.   ...

The Rome Ravine Selekt is a brand new board in the range. Based on the Ravine board with the same shape & camber profile, but with different core materials & additives. The Ravine Select is a stiffer & more powerful version of the Rome Ravine. The Ravine Select is designed for the aggressive rider who want to charge down the mountain & float with ease in the deeper snow.  The Rome Ravine Selekt uses Romes Free the ride 3D camber which is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point, is a mellow flat camber. This then moves into a reverse camber nose with the all new Directional Diamond 3D base bevel to give the nose a extra spoon shape. To translate that into performance terms it has a lot of power in the back with a mellow front & a big floaty nose which wont catch or dive under in deep snow. To add to this Rome put a taper in the board of 7.5mm depending on size. This accentuates the livelyness & power you can drive through the back foot & also makes the back of the board more nimble rather than being wider like the rest of the board. The width does come into play when taking this one off piste aiding float no end &, your choice, does enable you to ride this board a size smaller if you do so wish. The Carbon Omega Hotrods in the tail makes the Ravine Select much stiffer & with impact plates, Superpop core & Sinterspeed base you will be chargning down the mountain with a big smile.   ...

The Rome Ravine Selekt is a brand new board in the range. Based on the Ravine board with the same shape & camber profile, but with different core materials & additives. The Ravine Select is a stiffer & more powerful version of the Rome Ravine. The Ravine Select is designed for the aggressive rider who want to charge down the mountain & float with ease in the deeper snow.  The Rome Ravine Selekt uses Romes Free the ride 3D camber which is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point, is a mellow flat camber. This then moves into a reverse camber nose with the all new Directional Diamond 3D base bevel to give the nose a extra spoon shape. To translate that into performance terms it has a lot of power in the back with a mellow front & a big floaty nose which wont catch or dive under in deep snow. To add to this Rome put a taper in the board of 7.5mm depending on size. This accentuates the livelyness & power you can drive through the back foot & also makes the back of the board more nimble rather than being wider like the rest of the board. The width does come into play when taking this one off piste aiding float no end &, your choice, does enable you to ride this board a size smaller if you do so wish. The Carbon Omega Hotrods in the tail makes the Ravine Select much stiffer & with impact plates, Superpop core & Sinterspeed base you will be chargning down the mountain with a big smile.   ...

The Rome Stale Crewzer is a brand new snowboard in the range, designed by Ståle Sandbech. The Stale Crewzer is his all-mountain snowboard that can handle anything on the mountain & as the name suggest; cruise around on. The Rome Stale Crewzer features Romes Fusion Camber profile with a Positive camber in the centre of the board with small zones of rocker at the contact points. This gives you the modern go-to for all-mountain performance. The Rome Stale Crewzer has a Directional Twin shape with a single carbon Hot Rod in the board’s nose & tail to make the board super responsive & powerfully snappy. made from carbon, the Omegas act as housing built around the Hot Rods & are designed to provide additional power & responsiveness. Inside the Stale Crewzer you will find Impact Plates that is built to lessen impact & dampen chatter, these woven glass plates are built under the board's insert pack so you can go bigger. The Pop Core is strengthened with the Tiax & Biax Glass. The Stale Crewzer is also a fast gliding board with premium sintered base material featuring high molecular content & insane wax absorption thanks to its open structure. This is Rome's fastest & most advanced base for demanding riders. Have fun with Stale Crewzer with it's retro inspired shape & mellow yet snappy flex profile!    ...

The Rome Stale Crewzer is a brand new snowboard in the range, designed by Ståle Sandbech. The Stale Crewzer is his all-mountain snowboard that can handle anything on the mountain & as the name suggest; cruise around on. This is the wide version that is suitable for riders with boot size UK 10.5 (EU 45 ) or bigger.   The Rome Stale Crewzer features Romes Fusion Camber profile with a Positive camber in the centre of the board with small zones of rocker at the contact points. This gives you the modern go-to for all-mountain performance. The Rome Stale Crewzer has a Directional Twin shape with a single carbon Hot Rod in the board’s nose & tail to make the board super responsive & powerfully snappy. made from carbon, the Omegas act as housing built around the Hot Rods & are designed to provide additional power & responsiveness. Inside the Stale Crewzer you will find Impact Plates that is built to lessen impact & dampen chatter, these woven glass plates are built under the board's insert pack so you can go bigger. The Pop Core is strengthened with the Tiax & Biax Glass. The Stale Crewzer is also a fast gliding board with premium sintered base material featuring high molecular content & insane wax absorption thanks to its open structure. This is Rome's fastest & most advanced base for demanding riders. You can charge this board anywhere on the mountain season after season!  ...

The Rome Stale Fish is part of the Ståle Sandbech collection. The Stale Fish is his go to powder surfing board, & it is all about floating through the choppiest of waters. Go fast & go low with the Stale Fish & you will have a good time.  The Stale Fish features Free-the-ride camber that is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point is a mellow flat camber. This then moves into a reverse camber nose with Directional Diamond 3D base bevel to give the nose a spoon shape which wont catch or dive under in deep snow. The Stale Fish shape has a 20mm directional taper. This gives the Stale Fish a massive floaty nose that will float through deep powder but also fun to carve around on the piste with smooth turn initiation, reduce edge catch & complement all-mountain riding in all-senses. One single rod of bamboo milled into the boards core in the nose for pressability & playfulness. The Omega Hotrod is designed to provide additonal power & responsiveness so the big nose keeps it shape & don't get flappy at high speed.  The Stalefish is a super fun board to ride all over the mountain but especially on powder days. Ride it shorter for more fun!    ...

The Rome Stale Fish is part of the Ståle Sandbech collection. The Stale Fish is his go to powder surfing board, & it is all about floating through the choppiest of waters. Go fast & go low with the Stale Fish & you will have a good time.  The Stale Fish features Free-the-ride camber that is designed to drive a lot of power through the back foot thanks to the camber in the back of the board. The high point of the camber sits behind the centre point of the board & then from there to just in front of the front contact point is a mellow flat camber. This then moves into a reverse camber nose with Directional Diamond 3D base bevel to give the nose a spoon shape which wont catch or dive under in deep snow. The Stale Fish shape has a 20mm directional taper. This gives the Stale Fish a massive floaty nose that will float through deep powder but also fun to carve around on the piste with smooth turn initiation, reduce edge catch & complement all-mountain riding in all-senses. One single rod of bamboo milled into the boards core in the nose for pressability & playfulness. The Omega Hotrod is designed to provide additonal power & responsiveness so the big nose keeps it shape & don't get flappy at high speed.  The Stalefish is a super fun board to ride all over the mountain but especially on powder days. Ride it shorter for more fun!    ...

The 2021 Rome MOD is one hell of a board, an all mountain freestyle killer! It will devour anything you put in front of it from steep chutes to handrails the mod handles it all with a breeze. Based on a traditional camber profile the MOD has plenty of pop, grip & response as expected with any standard camber board. This gives a super livley ride when blended with the 7-8/10 flex all in a true twin centre stance package. To keep this board lively & drive more power Rome add their Carbon Omega Hotrods to the MOD in a reverse radial V, sounds fancy! This is a hollow sleeve which is milled into the finished core of the board. Into this sleeve a carbon rod is instereted which is only anchored at the central end of the sleeve. This allows the carbon to freely move in the sleeve so it isnt restricted by the core of the board & it can transfer all of its properties freely, more pop, more response, more life! They are laid up fron the edge under foor through to the centre of the tip & tail to ensure you can hold down big landings, transfer power in a heartbeat & pop higher than ever before be it an ollie or snapping in & out of carves. The raised 'bumps on the board are where this is allowed to move & where it is milled into the core, very clever, very effective stuff!! Speaking of the core the mod is a very lightweight board thanks to 5 bands of lightweight low density wood sandwiched together with poplar wood. This means the MOD feels very light & nimble under foot with a very low swing weight so you can get in & out of turns like lightening & spin with ease. The Mod is a really fast board too utilising Romes sinterspeed base which not only is rock solid it rides & glides incredibly fast. This gets matched with sinterstrong sidewalls which as the name suggest are also sintered so when you have this carving right up on its edge the sidewall will still glide well on the snow. These sidewalls also have increased amounts of el ...