The Regulator fits most head shapes & will protect your head with the injection molded ABS shell & EPS liner to absorb the impact of bigger hits. The Jet Diffusion vent system with internal venting system & rear exhaust vents keeps a nice airflow to ventilate your entire head evenly, while maintaining airflow through your goggles so you remain comfortable & keep your goggles fog free. No need to wear a hat underneath as the upgraded soft cupping detachable ear pads will keep you warm. Not only does the Regulator helmet give you protection but goggle shelf & clip assures you won't lose your goggles after a bad wipeout. Check out full list of Key Features & alternative products below Size Guide: Medium fits  55 -56cm (S/M Shell) Large fits    57-58cm (LRG Shell) X Large fits  59-60cm (XL Shell) ...

Pro Tec Regulator Snow Helmet in Matte Blue Trust the Pro Tec Regulator Blue helmet to keep your dome protected & warm when charging the steep & deep. The Regulator features Jet Diffusion. This venting system directs air into interior channels to ventilate your entire head evenly; while maintaining airflow through your goggles. This means that you will stay comfortable whilst your googles will stay fog free by extracting warm air & moisture while allowing the air to escape through the top vents of the helmet.. Pro Tec gave the Regulator Helmet a high density; injection-moulded ABS shell for durability & an EPS liner to absorb the impact of bigger hits. A goggle shelf & clip assures your goggles stays attached to the helmet. Removable & washable interior fit pads Ear pads
- upgraded soft cupping detachable ear pads
- Audio force ear pads sold separably Fit
- 4 sizes / 2 shell breaks Shell
- high density injection molded ABS Liner
- EPS impact liner Ventilation
- front vent system with interior channels & rear exhaust vents Goggle Shelf
- To keep goggles in place Certifications
- ASTM 2040 / CE 1077 Size Guide: Small fits 53-54cm Medium fits 55-56cm Large fits 57-58cm X Large fits 59-60cm RRP £69. 95







...

The Regulator fits most head shapes & will protect your head with the injection molded ABS shell & EPS liner to absorb the impact of bigger hits. The Jet Diffusion vent system with internal venting system & rear exhaust vents keeps a nice airflow to ventilate your entire head evenly, while maintaining airflow through your goggles so you remain comfortable & keep your goggles fog free. No need to wear a hat underneath as the upgraded soft cupping detachable ear pads will keep you warm. Not only does the Regulator helmet give you protection but goggle shelf & clip assures you won't lose your goggles after a bad wipeout. Check out full list of Key Features & alternative products below Size Guide: Medium fits  55 -56cm (S/M Shell) Large fits    57-58cm (LRG Shell) X Large fits  59-60cm (XL Shell) ...

Pro Tec Regulator Snow Helmet in Satin White Trust the Pro Tec Regulator helmet to keep your dome protected & warm when charging the steep & deep. The Regulator features Jet Diffusion. This venting system directs air into interior channels to ventilate your entire head evenly; while maintaining airflow through your goggles. This means that you will stay comfortable whilst your googles will stay fog free by extracting warm air & moisture while allowing the air to escape through the top vents of the helmet.. Pro Tec gave the Regulator Helmet a high density; injection-moulded ABS shell for durability & an EPS liner to absorb the impact of bigger hits. A goggle shelf & clip assures your goggles stays attached to the helmet. Removable & washable interior fit pads Ear pads
- upgraded soft cupping detachable ear pads
- Audio force ear pads sold separably Fit
- 4 sizes / 2 shell breaks Shell
- high density injection molded ABS Liner
- EPS impact liner Ventilation
- front vent system with interior channels & rear exhaust vents Goggle Shelf
- To keep goggles in place Certifications
- ASTM 2040 / CE 1077 Size Guide: Small fits 53-54cm Medium fits 55-56cm Large fits 57-58cm X Large fits 59-60cm RRP £69. 95







...

The Riot Andreas Wiig signature helmet is back for another season with a some design changes. Designed to meet the high demands of Norwegian slopestyle monster Andreas Wiig, the Protec Riot leaves no doubt that its the best in its class. The Riot helmet is very comfortable, fits most head shapes & makes sure there is no wind or snow hitting your forehead with the wind sheild by providing a gapless fit between your goggles & the helmet. The 7 passive vents will keep your head cool your whole run. Check out the full list of features & alternative colours below. Size guide: Medium fits  55-56cm Large fits 57 -58cm XL fits 59 -60cm XXL fits 61 -62cm ...

Protec Riot Helmet in Matte Deep Red: The Riot helmet has been updated with the Boa Fit System to make this lightweight helmet even more comfortable & fits most head shapes. Key

Features: Vents – 7 passive vents & goggle venting under the visor keep you from having to ever slow down Goggle Compatibility – The Protec Riot is outfitted with a goggle strap & the wind shield provides a gapless fit between goggles & helmet Adjustability – The Protec Riot has soft plush lined detachable ear pads & a chin strap lined with the same material Boa Fit System
- Dial in your custom fit Removable Ear Pads
- Upgrade & switch out the regular ear pads for some Audio Force ear pads (sold separately) EPS foam is the industry standard for a reason – it protects with minimal interference In-Mold Construction is your first level of protection against the hard ground. Size guide: Medium fits 55-56cm Large fits 57-58cm XLarge fits 59-60cm XXL fits 61 -62cm RRP £99



...

The Riot helmet is extremely comfortable, lightweight & safe. For 2013 the Riot helmet has been upgraded with the BOA Fit System so you can customize your fit. The In-Mold Construction with EPS liner will take the damage if you crash & bump your head & the Riot helmet is very lightweight & gives you a low profile at the same time. The peak provides a gapless fit between goggles & helmet & will keep the outer elements away from your face. The 7 passive vents keeps you comfortable & cool so you don't over heat. The ear pads keeps you warm so need to wear a hat underneath. The Riot helmet meets the safety standard for winter sports with ASTM 2040 & CE EN 1077, EN 1078 & CPSC 1203 certifications. Check out alternative Riot helmets below & key features... Size Guide: Medium fits 55-56cm Large fits 57-58cm XLarge fits 59-60cm XXL fits 61 -62cm ...

Protec Riot Helmet in Gloss With: The Riot helmet has been updated with the Boa Fit System to make this lightweight helmet even more comfortable & fits most head shapes. Key

Features: Vents – 7 passive vents & goggle venting under the visor keep you from having to ever slow down Goggle Compatibility – The Protec Riot is outfitted with a goggle strap & the wind shield provides a gapless fit between goggles & helmet Adjustability – The Protec Riot has soft plush lined detachable ear pads & a chin strap lined with the same material Boa Fit System
- Dial in your custom fit Removable Ear Pads
- Upgrade & switch out the regular ear pads for some Audio Force ear pads (sold separately) EPS foam is the industry standard for a reason – it protects with minimal interference In-Mold Construction is your first level of protection against the hard ground. Size guide: Medium fits 55-56cm Large fits 57-58cm XLarge fits 59-60cm XXL fits 61 -62cm RRP £99



...

Protec Riot Helmet: Prep yourself for the unknown & take charge with the Riot Helmet. Super comfortable & fits most head shapes. Key

Features: Vents – 7 passive vents & goggle venting under the visor keep you from having to ever slow down Goggle Compatibility – The Protec Riot is outfitted with a goggle strap & the wind shield provides a gapless fit between goggles & helmet Adjustability – The Protec Riot has soft plush lined detachable ear pads & a chin strap lined with the same material Removable Ear Pads
- Upgrade & switch out the regular ear pads for some Audio Force ear pads (sold separately) EPS foam is the industry standard for a reason – it protects with minimal interference In-Mold Construction is your first level of protection against the hard ground. Size guide: Medium fits 55-56cm Large fits 57-58cm XLarge fits 59-60cm RRP £85


...

The Riot helmet is extremely comfortable, lightweight & safe. The In-Mold Construction with EPS liner will take the damage if you crash & bump your head & the Riot helmet is very lightweight & gives you a low profile at the same time. The peak provides a gapless fit between goggles & helmet & will keep the outer elements away from your face. The 7 passive vents keeps you comfortable & cool so you don't over heat. The ear pads keeps you warm so need to wear a hat underneath. The Riot helmet meets the safety standard for winter sports with ASTM 2040 & CE EN 1077, EN 1078 & CPSC 1203 certifications. Check out alternative Riot helmets below & key features... Size Guide: Medium fits  55-56cm Large fits    57-58cm XLarge fits  59-60cm XXL fits 61 -62cm ...