Dillon Lloyd signature Buck frame from Wethepeople. This frame uses a taller 127mm head tube, allowing you to run a taller bar position with an uncut fork steerer, without having to run lots of ugly spacers! A steeper 75.5 degree head tube angle, a shorter 13.3” (slammed) chainstay make this frame super responsive, while a taller 11.8” bottom bracket to give extra clearance great for grinding. The Buck’s secret weapon is the super tough 7mm thick invest cast dropouts which are designed to run seamlessly into the frame & flush with plastic pegs & hub guards for the perfect fit. If you’re looking for a sturdy vessel to get wild on, the Buck is the one for you. section Product Specs

Material: Full 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.3" BB

Height: 11.8" WHEEL

Size: 20" STANDOVER

Height: 9.125" DROPOUT

Size: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: 5.4lbs section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Great all round frame for all types of riding Taller 127mm extended headtube for less spacers with an uncut fork Wider rear triangle allows clearance for a 2.50" tyre Frame comes drilled for Pivot-3 type removable brake mounts, but brake hardware is NOT included shogun-image-section









...

Dillon Lloyd signature Buck frame from Wethepeople. This frame uses a taller 127mm head tube, allowing you to run a taller bar position with an uncut fork steerer, without having to run lots of ugly spacers! A steeper 75.5 degree head tube angle, a shorter 13.3” (slammed) chainstay make this frame super responsive, while a taller 11.8” bottom bracket to give extra clearance great for grinding. The Buck’s secret weapon is the super tough 7mm thick invest cast dropouts which are designed to run seamlessly into the frame & flush with plastic pegs & hub guards for the perfect fit. If you’re looking for a sturdy vessel to get wild on, the Buck is the one for you. section Product Specs
Material:  Full 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.3" BB
Height: 11.8" WHEEL
Size: 20" STANDOVER
Height: 9.125" DROPOUT
Size: 14mm HEADSET TYPE:  Integrated BB TYPE:  Mid BRAKE MOUNTS:  Removable GYRO TABS:  Removable WEIGHT: 5.4lbs section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Great all round frame for all types of riding High-quality Chromoly construction Wide rear end for extra tire clearance Removable brake hardware (Brake hardware not included) shogun-image-section




...

Dillon Lloyd's Signature Bar. The Buck bar is one of the first bars in BMX to utilise the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in without having to worry about it slipping or breaking when things get rough. Using Wethepeople's time tested 4130 m 2 heat-treated crmo tubing & Dillon's own geometry, if you're looking for a dependable set of bars to get buck with, you've found them. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Wethepeoples Hydra 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. section Product Specs

Width: 29" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 925g/2.03lbs section

...

Dillon Lloyd's Signature Bar. The Buck bar is one of the first bars in BMX to utilise the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in without having to worry about it slipping or breaking when things get rough. Using Wethepeople's time tested 4130 m 2 heat-treated crmo tubing & Dillon's own geometry, if you're looking for a dependable set of bars to get buck with, you've found them. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Wethepeoples Hydra 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. section Product Specs

Width: 29" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 925g/2.03lbs section shogun-image-section

...

Dillon Lloyd's Signature Bar. The Buck bar is one of the first bars in BMX to utilise the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in without having to worry about it slipping or breaking when things get rough. Using Wethepeople's time tested 4130 m 2 heat-treated crmo tubing & Dillon's own geometry, if you're looking for a dependable set of bars to get buck with, you've found them. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Wethepeoples Hydra 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. section Product Specs Rise:  Multiple Options
Width: 29" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 925g/2.03lbs section shogun-image-section
...

Dillon  Lloyd signature Handlebars. This version of the Buck bar works with traditional 22.2mm stems. Rise: 9.15" & 9.45" section Product Specs Bar Type: 2pc

Width: 29" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Weight: 895g / 1.9lbs section shogun-image-section

...

Dillon  Lloyd signature Handlebars. This version of the Buck bar works with traditional 22.2mm stems. Rise: 9.15" & 9.45" section Product Specs Bar Type: 2pc

Width: 29" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Weight: 895g / 1.9lbs section shogun-image-section

...

Dillon¬¨‚Ć Lloyd signature Handlebars. This version of the Buck bar works with traditional 22.2mm stems. Rise: 9.15" & 9.45" section Product Specs Rise:  Multiple Options
Width: 29" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 895g / 1.9lbs section shogun-image-section
...

Velcro cable strap from Wethepeople. ...

5 panel cap features a Wethepeople woven label on the front ...