The Techfire front wheel takes Total's pro level wheel components to create a high end wheel ready to perform at the top level of BMX. Rim tape included. section Product Specs WHEEL

Size: 20" HUB: Total Tech V2 Sealed AXLE: Female RIM: Total Spitfire SPOKES: Butted NIPPLES: Brass WEIGHT: 960g / 33.86oz

...

The Techfire front wheel takes Total's pro level wheel components to create a high end wheel ready to perform at the top level of BMX. Rim tape included. section Product Specs WHEEL

Size: 20" HUB: Total Tech V2 Sealed AXLE: Female RIM: Total Spitfire SPOKES: Butted NIPPLES: Brass WEIGHT: 960g / 33.86oz

...

The Techfire front wheel takes Total's pro level wheel components to create a high end wheel ready to perform at the top level of BMX. Rim tape included. section Product Specs WHEEL
Size: 20" HUB:  Total Tech V2 Sealed AXLE:  Female RIM:  Total Spitfire SPOKES:  Butted NIPPLES:  Brass WEIGHT: 960g / 33.86oz
...

Mark Webb was looking for a strong bar without flex, so he chose to go with straight gauge 4130 heat treated tubing for max strength to weight ratio. He has also livened up the angles to fine tune his signature bar. section Product Specs

Width: 29.25" Up Sweep: 2.5° Backsweep: 10.5° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC section shogun-image-section

...

Mark Webb was looking for a strong bar without flex, so he chose to go with straight gauge 4130 heat treated tubing for max strength to weight ratio. He has also livened up the angles to fine tune his signature bar. section Product Specs

Width: 29.25" Up Sweep: 2.5° Backsweep: 10.5° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC section shogun-image-section

...

Mark Webb was looking for a strong bar without flex, so he chose to go with straight gauge 4130 heat treated tubing for max strength to weight ratio. He has also livened up the angles to fine tune his signature bar. section Product Specs Rise:  Multiple Options
Width: 29.25" Up Sweep: 2.5° Backsweep: 10.5° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC section shogun-image-section
...

Mark Webb has kept his geometry the same but added the exclusive DBS brake routing system to the frame, he feels the geometry is right on point & making a change would simply be for the sake of it, rather than something that was needed. He has however added some really fresh new colours to brighten things up. Please Note To achieve the desired seat height, the seat post may need to be cut (A suitably qualified person should do this) due to the 'DBS' flutes passing through the seat tube it is also important that the seat post does not touch the brake flutes as per the warning sticker on the frame, any damage deemed to be caused by failure to follow these instructions will not be covered by warranty. section Product Specs

Material: Full Multi Butted Sanko 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.2"-13.4" BB

Height: 11.5" WHEEL

Size: 20" STANDOVER

Height: 8.75" DROPOUT

Size: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: TBC section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Best suited to Street & Park riding High Quality Sanko Tubing Tapered & Butted Down Tube With Offset Thickness In Key Areas Removable Brake Mounts Plus DBS Kit & Tabs All Included shogun-image-section









...

Mark Webb has kept his geometry the same but added the exclusive DBS brake routing system to the frame, he feels the geometry is right on point & making a change would simply be for the sake of it, rather than something that was needed. He has however added some really fresh new colours to brighten things up. Please Note To achieve the desired seat height, the seat post may need to be cut (A suitably qualified person should do this) due to the 'DBS' flutes passing through the seat tube it is also important that the seat post does not touch the brake flutes as per the warning sticker on the frame, any damage deemed to be caused by failure to follow these instructions will not be covered by warranty. section Product Specs

Material: Full Multi Butted Sanko 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.2"-13.4" BB

Height: 11.5" WHEEL

Size: 20" STANDOVER

Height: 8.75" DROPOUT

Size: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: TBC section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Best suited to Street & Park riding High Quality Sanko Tubing Tapered & Butted Down Tube With Offset Thickness In Key Areas Removable Brake Mounts Plus DBS Kit & Tabs All Included shogun-image-section









...

Mark Webb has kept his geometry the same but added the exclusive DBS brake routing system to the frame, he feels the geometry is right on point & making a change would simply be for the sake of it, rather than something that was needed. He has however added some really fresh new colours to brighten things up. Please Note To achieve the desired seat height, the seat post may need to be cut (A suitably qualified person should do this) due to the 'DBS' flutes passing through the seat tube it is also important that the seat post does not touch the brake flutes as per the warning sticker on the frame, any damage deemed to be caused by failure to follow these instructions will not be covered by warranty. section Product Specs

Material: Full Multi Butted Sanko 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.2"-13.4" BB

Height: 11.5" WHEEL

Size: 20" STANDOVER

Height: 8.75" DROPOUT

Size: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: TBC section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Best suited to Street & Park riding High Quality Sanko Tubing Tapered & Butted Down Tube With Offset Thickness In Key Areas Removable Brake Mounts Plus DBS Kit & Tabs All Included shogun-image-section









...

Mark Webb has kept his geometry the same but added the exclusive DBS brake routing system to the frame, he feels the geometry is right on point & making a change would simply be for the sake of it, rather than something that was needed. He has however added some really fresh new colours to brighten things up. Please Note To achieve the desired seat height, the seat post may need to be cut (A suitably qualified person should do this) due to the 'DBS' flutes passing through the seat tube it is also important that the seat post does not touch the brake flutes as per the warning sticker on the frame, any damage deemed to be caused by failure to follow these instructions will not be covered by warranty. section Product Specs

Material: Full Multi Butted Sanko 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.2"-13.4" BB

Height: 11.5" WHEEL

Size: 20" STANDOVER

Height: 8.75" DROPOUT

Size: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: TBC section Product Highlights Responsive Geometry with Short Backend & Steep Headtube Best suited to Street & Park riding High Quality Sanko Tubing Tapered & Butted Down Tube With Offset Thickness In Key Areas Removable Brake Mounts Plus DBS Kit & Tabs All Included shogun-image-section









...