About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Fiend Pivotal Seat
Post
£24.99
Pivotal Stump BMX seat post from Fiend. 135mm length. WORKS ONLY WITH PIVOTAL SEATS. Specs: Length: 135mm Weight: 94g / 3.3oz   ...
Archived Product
image missing
Fiend Pivotal Seat
Post
£22.49
Pivotal Stump BMX seat post from Fiend. 135mm length. WORKS ONLY WITH PIVOTAL SEATS. section Product Specs TYPE: Pivotal LENGTH: 135mm DIAMETER: 25.4mm WEIGHT: 94g / 3.3oz ...
Available
image missing
Fiend Pivotal Seat
Post
£24.99
Pivotal Stump BMX seat post from Fiend. 135mm length. WORKS ONLY WITH PIVOTAL SEATS. section Product Specs TYPE: Pivotal LENGTH: 135mm DIAMETER: 25.4mm WEIGHT: 94g / 3.3oz ...
Available
image missing
Fiend Pivotal Seat
Post Black / 135mm
£28.99
Pivotal Stump BMX seat post from Fiend. 135mm or 185mm length. WORKS ONLY WITH PIVOTAL SEATS. section Product Specs TYPE:  Pivotal LENGTH: 185mm DIAMETER: 25.4mm WEIGHT: 94g / 3.3oz ...
Available
image missing
Fiend Plastic Bar Ends
£3.99
Pair of plastic push in barends from Fiend. Weight: 20g / 0.7oz ...
Archived Product
image missing
Fiend Process Front
Hub
£62.99
The Process flanged front hub features a 6061 aluminum 36 hole hub shell, precision sealed bearings, a chromoly female axle with chromoly 3/8" bolts, 7075 alloy press-fit collars that are compatible with the Cab nylon front hub guards. Axle: 3/8x 24tpi Female Bolts. Bearing

Size: 2x 6902. Weight: 290g / 10.2 oz. section Product Specs AXLE

Size: Female SPOKE HOLES: [PRODUCT_PROPERTY_SPOKE HOLES}] BEARINGS: Sealed WEIGHT: 290g / 10.2 oz



...
Available
image missing
Fiend Process IC Fork
£159.99
Street forks from Fiend. Fiends processt fork features fully heat-treated chromoly tubing throughout with a 1pc. machined steerer tube with integrated bearing race for use with all 45v 45 headsets & a 6061 alloy compression bolt. The 6mm thick investment cast drop out & lower leg junction provide the ultimate strength while maintaining a clean look & the 20mm offset helps keep the front wheel under the rider for easier nose manuals. section Product Specs Steerer Length: 162mm Wheel

Size: 20"

Material: 4130 Chromoly Dropout

Size: 10mm Offset: 20mm Weight: 963g / 2.124lbs section





...
Available
image missing
Fiend Process IC Fork
ED Black
£154.99
The Fiend Process Fork features fully heat-treated chromoly tubing throughout with a 1-piece machined steerer tube with integrated bearing race for use with all 45v 45 headsets & a 6061 alloy compression bolt. 6mm thick investment cast drop out & lower leg junction provide the ultimate strength while maintaining a clean look & the 20mm offset helps keep the front wheel under the rider for easier nose manuals. section Product Specs Steerer Length: 162mm Steerer Diameter:  Wheel
Size: 20"
Material: 100% chromoly Dropout
Size: 10mm Offset: 20mm Weight: 2.18lbs (990g)


...
Available
image missing
Fiend Process SDS
Cassette Hub
£154.99
Freecoaster from Fiend. Featuring a CNC machined alloy shell that’s been trimmed down to reduce weight & to look more like a cassette hub than a freecoaster the hub takes advantage of KHE’s proven freecoaster internals & a hollow chromoly.. .. ...
Archived Product
image missing
Fiend Process SDS
Cassette Hub
£154.99
High quality rear cassette hub from Fiend with Switch Drive System, allowing easy switchover from LHD/RHD & vice versa. 6061-Alluminium shell, Sealed bearings, 1pc 9t driver, left & right hand side. Chromoly male axle section Product Specs HUB TYPE: Cassette AXLE: 14mm Male DRIVER: 9t SPOKE HOLES: 36h WEIGHT: 466g / 16.45oz ...
Available

Fiend Process Front Hub

The Process flanged front hub features a 6061 aluminum 36 hole hub shell, precision sealed bearings, a chromoly female axle with chromoly 3/8″ bolts, 7075 alloy press-fit collars that are compatible with the Cab nylon front hub guards. Specs.. ..
RIP - This product is no longer available on our network. It was last seen on 26.09.2019

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
  • Availability: Out Of Stock
  • Supplier: Sourcebmx
  • SKU: 31679AWUK
Availability: In Stock
£74.99
cycling BMX Front Hubs
Description Reviews / Comments Add New

Product Description

The Process flanged front hub features a 6061 aluminum 36 hole hub shell, precision sealed bearings, a chromoly female axle with chromoly 3/8″ bolts, 7075 alloy press-fit collars that are compatible with the Cab nylon front hub guards. Specs.. ..

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Nylon - A family of synthetic polymers
Shell - A hard external structure or surface.
Bearings - A direction or a way someone moves around.

Supplier Information

Sourcebmx
Ride in style with Source BMX (https://www.sourcebmx.com/). Explore a vast selection of BMX bikes, parts, accessories, and apparel for riders of all levels. With top brands and expert advice, Source BMX ensures you have everything you need for your next session. Elevate your BMX experience and unleash your passion for riding with Source BMX.
Page Updated: 2024-02-27 09:26:38

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu