The Federal Stance XL rim has a wider (40mm) cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger & stiffer than conventional rims & also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% to reduce the possibility of spokes pulling through the rim. We have also changed the material from Aluminium 6061 to 6066 which increases the strength by Approx. 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance. The internal sidewall height is also reduced to keep the tyre firmly in place when inflated & the base of the rim is sunken to ease the installation & removal of tyres section Product Specs WHEEL

Size: 20" SEAM: Welded ERD: 394mm

Height: 15mm

Width: 40mm SPOKE HOLES: 36h WEIGHT: 524g / 18.5oz





...

The Federal Stance XL rim has a wider (40mm) cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger & stiffer than conventional rims & also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% to reduce the possibility of spokes pulling through the rim. We have also changed the material from Aluminium 6061 to 6066 which increases the strength by Approx. 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance. The internal sidewall height is also reduced to keep the tyre firmly in place when inflated & the base of the rim is sunken to ease the installation & removal of tyres section Product Specs WHEEL
Size: 20" SEAM:  Welded ERD: 394mm
Height: 15mm
Width: 40mm SPOKE HOLES: 36h WEIGHT: 524g / 18.5oz


...

Pivotal stealth post from Federal. Made from extruded 6061 aluminium, 200mm & with a printed Federal logo. Compatible with both stealth & regular pivotal seats. section Product Specs TYPE:  Stealth LENGTH: 200mm DIAMETER: 25.4mm WEIGHT: 136g / 4.8oz ...

Stevie Churchill signature V2 handlebars from Federal. The new V2  Stevie bars now come in 9”, Stevie was keen to have a higher bar while still keeping the back & up sweep the same as his previous bar. The bars are still made from 13 butted 4.. .. ...

Stevie Churchill signature V2 handlebars from Federal. The new V2 Stevie bars now come in 9", Stevie was keen to have a higher bar while still keeping the back & up sweep the same as his previous bar. The bars are still made from 13 butted 4130 heat treated Chromoly with the unique raised Federal logo on the crossbar. section Product Specs Bar Type: 2pc

Width: 29.5" Up Sweep: 3 ° Backsweep: 11.5 ° Bar Clamping Diameter: 22.2mm Weight: 807g / 1.78lbs section

...

50% cotton, 50% polyester bmx t-shirt from Federal. Features a large print on the front. ...

Tripod seat post from Federal. Made from 6061-T6 aluminum. Wedge piece is included to adjust to the two seat angles that are most commonly used. 200mm long. Only works with Tripod seats Specs: Length: 200mm Weight: 136g / 4.8oz ...

The Federal tyres are designed to be an almost perfect fit on the Stance rims, however this can make it difficult to install & remove the tyres. The new Federal tyre levers were designed to make this task a lot easier. The tyre levers come in a pack of three that snap together & we have also included a convenient air removal pin to help riders release the air out of their tyres. ...

The Liquid fork has been redesigned to create the V2 for a completely different look & feel which is more in line with what modern street riders require. The V2 liquid fork feature smaller diameter with increased wall thickness tapered fork.. .. ...

The Liquid fork has been redesigned to create the V2 for a completely different look & feel which is more in line with what modern street riders require. The V2 liquid fork feature smaller diameter with increased wall thickness tapered fork legs, Smaller crown diameter to match the fork legs, new invest cast dropout design inspired by the original liquid fork (now with 30mm offset) & wider clearance for tyres you to 2.4. section Product Specs Steerer Length: 165mm Wheel

Size: 20"

Material: 4130 Chromoly Dropout

Size: 10mm Offset: 30mm Weight: 923g / 2.03lbs section





...