The Eclat Storm Fork is the end result of over 2 years of extensive research & development into how they could make one of the strongest BMX forks possible. After years of work, & countless hours of laboratory & real life rider testing with the pro team, they believe they have reached a new benchmark in BMX fork strength. Don't let the Storm forks subtle appearance deceive you, this fork is a well-calculated balance of tubing thickness, material

Specification & their own heat-treatment process‚ ensuring that it can hold up to more abuse than any fork before it. Despite the huge increase of strength in this fork they still used a clean & simplistic design. Eclat also kept the weight to a minimum, making it much lighter than you would expect. section Product Specs Steerer Length: 170mm Wheel

Size: 20"

Material: 4130 Chromoly Dropout

Size: 10mm Offset: 25 & 30mm Weight: 1015g / 2.38lbs section







...

Eclat's Storm Fork marks over 3 years of extensive research & development into making one of the strongest BMX forks possible. These forks have been rigorously tested in the lab & pushed to their limits by countless hours of real life rider testing with Eclat's Pro Team. The result is what they believe to be a new benchmark in BMX fork strength. This fork balances tubing thickness, material

Specification & Eclat's own heat-treatment process ensuring that it can hold up to more abuse than any fork before it. Despite the Storm's ridiculous increase in strength its overall design has been keep really clean & simplistic, not only that but it's a lot lighter than you would think something this strong would be. section Product Specs Steerer Length: 170mm Steerer Diameter:  Wheel
Size: 20"
Material: 100% chromoly Dropout
Size: 10mm Offset: 25mm
- 30mm Weight: 2.24lbs (1015g)





...

Full liquid post heat-treated seamless 4130 chromoly fork from Eclat with a fully cnc'd steerer & butted fork blades with clearance for 2.4" tyres & integrated crown race. Designed for integrated 45° headsets. CNC machined laser cut 5mm thick dropout with CNC detail & M24 thread, 7075-T6 alloy top bolt. section Product Specs Steerer Length: 170mm Wheel

Size: 20"

Material: Chromoly Dropout

Size: 10mm Offset: 24/28mm Weight: 898g





...

Full liquid post heat-treated seamless 4130 chromoly fork from Eclat with a fully cnc'd steerer & butted fork blades with clearance for 2.4" tyres & integrated crown race. Designed for integrated 45° headsets. CNC machined laser cut 5mm thick dropout with CNC detail & M24 thread, 7075-T6 alloy top bolt. section Product Specs Steerer Length: 170mm Wheel

Size: 20"

Material: Chromoly Dropout

Size: 10mm Offset: 24/28mm Weight: 898g





...

Full liquid post heat-treated seamless 4130 chromoly fork from Eclat with a fully cnc'd steerer & butted fork blades with clearance for 2.4" tyres & integrated crown race. Designed for integrated 45° headsets. CNC machined laser cut 5mm thick dropout with CNC detail & M24 thread, 7075-T6 alloy top bolt. section Product Specs Steerer Length: 170mm Wheel

Size: 20"

Material: Chromoly Dropout

Size: 10mm Offset: 24/28mm Weight: 898g





...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section

...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section

...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section

...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section shogun-image-section

...

Eclat's Strangler Bars are their first 4-piece design that was meticulously worked on to remove all the annoying issues that 4-piece bars have notoriously suffered from. The Strangler Bar utilises multiple butted tubing throughout to give these bars a strong build while shaving off weight where possible. Being oversized these Strangler bars have a 25.4mm diameter tube where the stem clamps, this increased size over the traditional 22.2mm clamp helps taller bars stay locked in place in the stem. Please note: as the Eclat Strangler 4-Piece Oversize Bar is oversized you will need a 1" OS (Oversized) stem to run it! section Product Specs Rise:  Multiple Options
Width: 29" Up Sweep: 2.5° Backsweep: 12° Bar Clamping Diameter: 25.4mm Bar Type: 4-Piece Weight: 1130g (39.9oz) section shogun-image-section
...