More From Contributor

The Seeker pedal was born out of desire & need. Eclat PRO riders like Devon Smillie & Shane Weston asked for a pedal with a larger platform than most, but with a slightly thinner profile. By using regular unsealed bearings you are limited ...

Available

The Seeker Pedal was born out of desire & need. By using regular unsealed bearings you are limited with how thin you can actually make the pedal body without the bearing becoming too small in size, & in return, the axle gets thinner & weaker. To combat this issue Eclat decided to take the battle proven dual bearing & bushing system that they used in the legendary Surge alloy pedal & apply it to a Nylon fiberglass body. The end result is a pedal body that is not only thinner in profile than any of their other pedals, but also completely flat, without any kind of bump or raised section. Combined with a larger overall surface area, a dual concave design, & a micro-knurled surface – this makes for one of our best feeling & most supportive pedals to date. A larger pedal gives the foot more support, especially on tricks where your feet come off (i.e. tailwhips) & also on hard landings, since the load is more spread out & evenly distributed. Using twin sealed bearings & a bushing for extra support, the Seeker pedal’s design allowed Eclat to enlarge the size of the axle & make it stronger than your typical unsealed pedal, & also much smoother & longer lasting. section Product Specs TYPE/FITS: 9/16"

Material: injection molded nylon / fibreglass BEARINGS: Sealed PACK

Size: 2 (Pair) WEIGHT: 395g (13.95oz) (per pair)

...

Available

Eclat's Seeker Pedal was born thanks to many of their Pro team asking for a pedal with a larger platform than most, but with a slightly thinner profile. Regular unsealed bearings limit how thin you can actually make the pedal body without the bearing & axle getting smaller & weaker, so the solution was to use battle-proven dual bearing & bushing system from Eclat's legendary Surge pedal. Thanks to this construction technique the Seeker boasts a thinner profile to any of Eclat's other pedals without having any unecessary raised areas. A micro-knurled surface & durable pins adds plenty of grip & traction. The twin sealed bearing & bushing design adds extra support while the enlarged axle size makes it much stronger than a typical unsealed pedal, it's also. much smoother & longer lasting too. section Product Specs TYPE/FITS: 9/16
- 3pc
Material: injection molded nylon / fibreglass BEARINGS: Sealed PACK
Size: 2 (Pair) WEIGHT: 395g (13.95oz) (per pair)

...

Available

Eclat Worked on a new front hub & based the internals & spec from the super popular Cortex front hub but have updated the shell to match the Seismic rear cassette, Also the Female bolts have been increased to 35mm for better use with pegs section Product Specs AXLE

Size: Female SPOKE HOLES: BEARINGS: Sealed WEIGHT: 302g / 10.65oz

...

Available

The long awaited & highly anticipated Seismic hub from Eclat is now available! Eclat have designed a brand new cassette TCS (Toothed Coupling System) mechanism which features 2 couple d toothed ratchet rings which are inside the hub & the driver. The two rings are pushed together with a very special design of spring, which allows the hub to transfer power in one direction, & “freewheel” in the other. Basically a much stronger internal mechanism, which can’t fail even after years of heavy use. No more skipping, slipping or popping, you can really crank this thing as hard you want & it’s not going to fail. Even after years of heavy use, this hub was designed to keep going on & on. 2 x Nylon Eclat Hub guards included. section Product Specs HUB TYPE: Cassette AXLE: 14mm Male DRIVER: 9t SPOKE HOLES: 36h WEIGHT: 467g / 16.45oz ...

Available

The long awaited & highly anticipated Seismic hub from Eclat is now available! Eclat have designed a brand new cassette TCS (Toothed Coupling System) mechanism which features 2 couple d toothed ratchet rings which are inside the hub & the driver. The two rings are pushed together with a very special design of spring, which allows the hub to transfer power in one direction, & freewheel in the other. Basically a much stronger internal mechanism, which can't fail even after years of heavy use. No more skipping, slipping or popping, you can really crank this thing as hard you want & it's not going to fail. Even after years of heavy use, this hub was designed to keep going on & on. 2 x Nylon Eclat Hub guards included. section Product Specs HUB TYPE: Cassette AXLE: 14mm Male DRIVER: 9t DRIVE SIDE: Left Side Drive SPOKE HOLES: 36h WEIGHT: 466.9g (1.03lbs) ...

Available

Eclat's long awaited, highly anticipated Seismic Cassette Hub is finally here, utilising a newly designed cassette TCS (Toothed Coupling System) mechanism. This new system features 2 coupled toothed ratchet rings which are inside the hub & the driver, the two rings are pushed together with a very special design of spring, which allows the hub to transfer power in one direction & "freewheel" in the other. Basically a much stronger internal mechanism, which can't fail even after years of heavy use. No more skipping, slipping or popping, you can really crank this thing as hard you want & it's not going to fail. Even after years of heavy use, this hub was designed to keep going on & on. The hub shell is built from 6061-T6 aluminium & paired with a heat-treated hollow chromoly axle for reliability, & it also features sealed bearings & comes with Eclat's Viper nylon-fibreglass hubguards. section Product Specs HUB TYPE: Cassette AXLE: 14mm Male DRIVER: 9t DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: 467g (1.03lbs) ...

Available

Eclat Seismic Front Hub Black

Eclat Worked on a new front hub and based the internals and spec from the super popular Cortex front hub but have updated the shell to match the Seismic rear cassette, Also the Female bolts have been increased to 35mm for better use with pegs. section Product Specs AXLE SIZE: Female SPOKE HOLES: 36h BEARINGS: Sealed WEIGHT: 302g (10.65oz)