When it came to designing the Contra pedal, Eclat were having trouble keeping the pedal profile thin while not sacrificing the strength of the spindle. Instead of taking an ‘off-the-shelf’ spindle, they went & developed their own custom option which uses a smaller caged bearing, but stays thicker closer to the crank arm where you need the strength the most. With removable pins on one side of the pedal, you can keep one side nice & grippy, & one side for grinding on. You can also put the steel pins in after the molded pins have been worn down to give more life to your pedal. The end result is a super low profile pedal, with an axle built to withstand the force of today’s toughest riding. section Product Specs TYPE/FITS: 9/16"
- 3pc
Material:  Plastic BEARINGS:  Looseball PACK
Size: 2 (Pair) WEIGHT: 0.85lbs (389g)


...

The control is Eclat's in between model, it uses certain elements of the command tyre to create a perfect all round street & ramp edition. The offset sidewall contours create flawless traction when cornering while the wide directional tread in.. .. ...

When it came to his first signature Eclat product, Lewis Mills knew exactly what he wanted. Taking inspiration from the Dive & Morrow Bars which he's ridden for years & combining them with his own personal shape & geometry. Or course the Controller Bars are built to withstand the heaviest of riding with their full liquid, post heat-treated, seamless 4130 Cr Mo construction. section Product Specs Rise:  Multiple Options
Width: 29.5" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2-Piece Weight: 920g (32.45oz) section shogun-image-section
...

The Controller Bars were Lewis Mills first signature Eclat part, based on a combination of the Dive & Morrow bars that he had been riding for years. Combined with his own personal shape & geometry, Lewis wanted the ability to switch between a 9.5" & 9.75" rise according to his stem setup so both rises are available as standard. section Product Specs Rise:  Multiple Options
Width: 29.5" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2-Piece Weight: 920g (32.45oz) section shogun-image-section
...

The Core linear brake cable comes with a poly-slip coated inner wire & a reinforced spiral shell to reduce cable kinking. ...

The Core linear brake cable comes with a poly-slip coated inner wire & a reinforced spiral shell to reduce cable kinking. ...

Complete Front Wheel from Eclat. Assembled using the Cortex Front Hub & the  Bondi  Straight wall flash welded rim. This wheel comes with 2 x Nylon hub guards & rim tape Specs: Axle: 3/8"x 24tpi Female Bolts Wheel

Size: 20" Bearing

Size:.. ..



...

Complete Freecoaster Wheel from Eclat. Assembled using the Cortex freecoaster hub & the Bondi XL rim. Come with the Eclat viper nylon hubguard. section Product Specs WHEEL

Size: 20" HUB: Eclat Cortex Coaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left & Right Options RIM: Eclat Bondi XL SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1428g / 50.38oz

...

This eclat " Camber Sleeved X Cortex" Freecoaster Rear Wheel is a 20" rear freecoaster wheel which consists of the eclat " Cortex" freecoaster and theeclat " Camber Sleeved" rim. Wheel-
Size: 20" Hub: eclat " Cortex" Freecoaster

Material: Shel.. ..


...

This eclat " Camber Sleeved X Cortex" Freecoaster Rear Wheel is a 20" rear freecoaster wheel which consists of the eclat " Cortex" freecoaster & theeclat " Camber Sleeved" rim section Product Specs WHEEL

Size: 20" HUB: Eclat Cortex Coaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left & Right Options RIM: Eclat Camber Sleeved SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1450g

...