The Thirty Two Shiloh 2 Jacket brings urban styling to the mountain. Waterproof & breathable this big, bad & bold jacket has a laidback, relaxed fit that leaves plenty of room for layering if the temperature drops. A peaked storm hood gives you a bit of extra protection when the weather closes in & the fully taped seams & internal gaiters make sure that the powder stays on the hill when your adventure takes you off the beaten track. Features

Fabric: Textured Nylon Waterproof Rating: 10 000mm, Breathability rating: 10, 000g Zip mesh vents Fully taped seams Wrist gaiters Waist gaiters Adjustable hood Adjustable cuffs Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.

...

The Thirty Two Shiloh 2 Jacket brings urban styling to the mountain. Waterproof & breathable this big, bad & bold jacket has a laidback, relaxed fit that leaves plenty of room for layering if the temperature drops. A peaked storm hood gives you a bit of extra protection when the weather closes in & the fully taped seams & internal gaiters make sure that the powder stays on the hill when your adventure takes you off the beaten track. Features

Fabric: Textured Nylon Waterproof Rating: 10 000mm, Breathability rating: 10, 000g Zip mesh vents Fully taped seams Wrist gaiters Waist gaiters Adjustable hood Adjustable cuffs Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.

...

The 32 Prion FT is a super comfortable & lightweight all-mountain boot with a forgiving medium flex. It features 32's Patent Pending Fast Track Lacing System, & has a rubber outsole with EVA cushioning for durable shock absorption & a 3D Moulded Tongue for easier lacing & a secure fit. It also has a Level 1 Liner & a Level 1 Ortholite Footbed.
Features: Comfort Fit
- Level 1 Liner Level 1 Ortholite Footbed Fast Track Lacing System Rubber outsole w/EVA cushioning 3D Moulded Tongue Internal Lacing System Flex Rating 4/10 (1=soft/10=stiff) Glossary: Level 1 Liner:100% heat mouldable single density soft touch EVA* foam for added comfort & warmth. Lacing system w/lace lock for enhanced heel hold & fit. Internal anatomical EVA* overlays in heel for optimal hold. Aegis anti-microbial coating eliminates odour. Level 1 Ortholite Footbed: Moulded Ortholite footbed w/spring-back tech, retains 95% of its thickness over time & won't flatten out. Fuzzy topsheet. Ortholite Footbed: Open pored PU foam with high breathability, good wicking, long-life damping & anti-bacterial function. Upper made from fine textile fabric. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day.EVA: Ethylene Vinyl Acetate, a polymer used to absorb physical shock. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.

...

The Prion quickly became one of our hot sellers last season because of the fit, flex & quick lacing system. The Fast Track system quickly means that you can customise both upper & lower lacing zones making them very easy to get on & off. The medium flex make it suitable for riders looking for a little more play or beginners that like quicker less fussy lacing. Features Team Fit
- Level 2 Liner Level 1 Footbed Fast Track Lacing System Articulating Cuff 3D Moulded Tongue Flex Rating 3/10 (1=soft/10=stiff) Glossary Level 2 Liner:100% Heat Moldable Intuition, Ultralon Liners. Single Density Intuition Ultralon foam for comfort, warmth & support. Lacing System with Lace Lock for enhanced heel hold & fit. Internal anatomical EVA overlays in heel for optimal heel hold & Aegis anti-microbial coating to eliminate odor. Level 1 Footbed: Molded Ortholite Footbed provides spring-back technology, retaining 95% of its thickness over time & won't flatten out. Lightweight providing optimum performance. Fuzzy topsheet for warmth & comfort Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.
...

The 32 Summit is, simply put, the best quality boot at this price period. If you're buying your first boots, or are on a tight budget, then look no further, as this soft to mid flex bargain does the job & leaves you with change for your pass. It features 32's Level 1 Liner & Level 1 Ortholite Footbed, as well as a rubber outsole with EVA cushioning for durable shock absorption.

Features: Comfort Fit
- Level 1 Liner Level 1 Ortholite Footbed Rubber outsole w/EVA cushioning Internal Lacing System Flex Rating 3/10 (1=soft/10=stiff) Glossary: Level 1 Liner:100% heat mouldable single density soft touch EVA* foam for added comfort & warmth. Lacing system w/lace lock for enhanced heel hold & fit. Internal anatomical EVA* overlays in heel for optimal hold. Aegis anti-microbial coating eliminates odour. Level 1 Ortholite Footbed: Moulded Ortholite footbed w/spring-back tech, retains 95% of its thickness over time & won't flatten out. Fuzzy topsheet. Ortholite Footbed: Open pored PU foam with high breathability, good wicking, long-life damping & anti-bacterial function. Upper made from fine textile fabric.EVA: Ethylene Vinyl Acetate, a polymer used to absorb physical shock.


...

The TM TWO is a high spec classic lace up that is responsive & super light. It features 32s Level 4 Liner, an inner ankle harness & articulating cuff for precise ankle hold & smooth flex. Under foot you also get an STI evolution Foam outsole with G2 Gel to take the sting out of the biggest landing & harsh terrain. Features Team Fit
- Level 4 Liner Level 2 Footbed STI Evolution foam System G2 Gel Tongue Tension System Articulating Cuff 3D Moulded Tongue Inner Ankle Harness Flex Rating 7/10 (1=soft/10=stiff) Glossary Level 4 Liner:100% heat mouldable dual density soft touch Ultralon foam gives comfort, warmth & support. Internal anatomical overlays in heel for optimal hold. External overlays for support & response. Integrated Velcro closure reduces bulk & pressure points. Aegis anti-microbial coating eliminates odour. Level 2 Footbed: Moulded PU for ultimate comfort. Dual density PU in heel for impact protection. Mesh topsheet. STI Evolution Foam: Exceptionally light foam with outstanding cushioning properties. G2 Gel:A gel compound that is affected less by temperature changes, & will not bottom out or pop under high impact. Tongue Tension System: Delivers increased leverage & reduced friction. Works with the 3D moulded tongue for easier closure & a more secure fit. Articulating Cuff: Advanced shell construction delivers high performance, a smooth flex & durability. Also less shell distortion for consistent heel hold throughout the flex range. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.
...

The Thirty Two Women's 86 FT has a classic skate shoe style, & is aimed at riders looking for a soft to moderate flex boot with a fast & easy lacing system. It features 32's Patent Pending Fast Track Lacing System, & has a 3D moulded Tongue for easier lacing & a secure fit. It also has a Level 1 Liner & a Level 1 Ortholite Footbed.
Features: Comfort Fit
- Level 1 Liner Level 1 Ortholite Footbed Fast Track Lacing System 3D Moulded Tongue Internal Lacing System Flex Rating 4/10 (1=soft/10=stiff) Glossary: Level 1 Liner:100% heat mouldable single density soft touch EVA* foam for added comfort & warmth. Lacing system w/lace lock for enhanced heel hold & fit. Internal anatomical EVA* overlays in heel for optimal hold. Aegis anti-microbial coating eliminates odour. Level 1 Ortholite Footbed: Moulded Ortholite footbed w/spring-back tech, retains 95% of its thickness over time & won't flatten out. Fuzzy topsheet. Ortholite Footbed: Open pored PU foam with high breathability, good wicking, long-life damping & anti-bacterial function. Upper made from fine textile fabric. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day.3D moulded tongue: Wraps the foot for enhanced fit & heel hold.

...

The Thirty Two Women's 86 FT has a classic skate shoe style, & is aimed at riders looking for a soft to moderate flex boot with a fast & easy lacing system. It features 32's Patent Pending Fast Track Lacing System, & has a 3D moulded Tongue for easier lacing & a secure fit. It also has a Level 1 Liner & a Level 1 Ortholite Footbed. Features Comfort Fit
- Level 1 Liner Level 1 Ortholite Footbed Fast Track Lacing System 3D Moulded Tongue Internal Lacing System Flex Rating 4/10 (1=soft/10=stiff) Glossary Level 1 Liner:100% heat mouldable single density soft touch EVA* foam for added comfort & warmth. Lacing system w/lace lock for enhanced heel hold & fit. Internal anatomical EVA* overlays in heel for optimal hold. Aegis anti-microbial coating eliminates odour. Level 1 Ortholite Footbed: Moulded Ortholite footbed w/spring-back tech, retains 95% of its thickness over time & won't flatten out. Fuzzy topsheet. Ortholite Footbed: Open pored PU foam with high breathability, good wicking, long-life damping & anti-bacterial function. Upper made from fine textile fabric. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.
...

The Thirty Two Women's Lashed FT is a quality all-mountain classic that features 32's Patent Pending Fast Track Lacing System. Engineered with a moderate flex, it offers great support & a smoother forward flex thanks to the Articulating Cuff, & has an Inner Ankle Harness & 3D moulded Tongue for easier lacing, incredible heel hold & a secure fit. It also has an STI Evolution Foam Sole unit, a Level 3 Liner & a Level 2 Footbed.
Features: Team Fit
- Level 3 Liner Level 2 Footbed Fast Track Lacing System STI Evolution foam Articulating Cuff 3D Moulded Tongue Inner Ankle Harness Independent Lacing Eyestays Flex Rating 5/10 (1=soft/10=stiff) Glossary: Level 3 Liner:100% heat mouldable dual density soft touch Ultralon foam gives comfort, warmth & support. Internal anatomical overlays in heel for optimal hold. External overlays for support & response. Integrated Velcro closure reduces bulk & pressure points. Aegis anti-microbial coating eliminates odour. Level 2 Footbed: Moulded PU for ultimate comfort. Dual density PU in heel for impact protection. Mesh topsheet. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day.STI Evolution Foam: Exceptionally light foam with outstanding cushioning properties. Articulating Cuff: Advanced shell construction delivers high performance, a smooth flex & durability. Also less shell distortion for consistent heel hold throughout the flex range.3D moulded tongue: Wraps the foot for enhanced fit & heel hold.

...

The Lashed FT offers incredible light weight performance & one of the best speed lacing systems on the market. This boot is lightened up using the STI evolution Foam Outsole so you can really feel just how light they are. Its engineered with a moderate flex & features an articulating cuff for smoother forward lean, & also has Inner Ankle harness & 3D molded tongue for excellent heel hold. Features Team Fit
- Level 3 Liner Level 2 Footbed Fast Track Lacing System STI Evolution foam Articulating Cuff 3D Moulded Tongue Inner Ankle Harness Independent Lacing Eyestays Flex Rating 5/10 (1=soft/10=stiff) Glossary Level 3 Liner:100% heat mouldable dual density soft touch Ultralon foam gives comfort, warmth & support. Internal anatomical overlays in heel for optimal hold. External overlays for support & response. Integrated Velcro closure reduces bulk & pressure points. Aegis anti-microbial coating eliminates odour. Level 2 Footbed: Moulded PU for ultimate comfort. Dual density PU in heel for impact protection. Mesh topsheet. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day. STI Evolution Foam: Exceptionally light foam with outstanding cushioning properties. Articulating Cuff: Advanced shell construction delivers high performance, a smooth flex & durability. Also less shell distortion for consistent heel hold throughout the flex range. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.
...