The Thirty-Two Lowdown Jacket is an easy going shell with a 90's inspired look that delivers no-nonsense all-weather protection.

...

The Thirty-Two Merc Jacket is big on style, big on features & big on performance. Fully taped seams, a highly waterproof & breathable rip stop fabric, & plenty of low bulk insulation ensure all day comfort.
Features: Nylon Micro Rip Stop Shell
- Relaxed Fit
- Fully taped seams
- 60g thermal insulation
- Zip mesh vents
- Wrist/waist gaiters
- Waterproof zips
- Hood cinch system
- Media pocket
- Removable skirt
- Pass pocket
- Glove loops
- Hem cinch
- Big storage pockets
- Jacket-to-pant loops
- WATERPROOF RATING 20000mm, BREATHABILITY 10000g.GLOSSARY: Fully Taped Seams: Unlike products with critical taped seams, every single seam is taped with a high quality waterproof b&.















...

The Thirty Two Muir Pant is perfect for those who appreciate the classics. This regular fit, flat front chino gives you enough water resistant, breathable protection to tear up the mountain & timeless styling that wont go out of fashion. Features

Fabric: 100% Textures Polyester Dobby Waterproof Rating: 8, 000mm Breathability Rating: 5, 000 g/m 2/24 Regular fit Critically taped seams Thigh vents Cuff gussets Waist cinch system Boot gaiters Snap cuffs Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.

...

The Thirty Two Reppin Hoody is a great bit of streetwear with fearsome styling & a practical edge. This super warm zip hoody incorporates STI Repel technology, which prevents water from soaking into the fibres, helping you to stay drier for longer. It is great for use as part of a layering system & perfect as an outer layer for urban use on those cooler days. Features STI Repel Technology Full zip 2 Zipped handwarmer pockets Adjustable drawcord hood Glossary STI Repel Technology STI Repel Technology is a finish that is applied to the fabric to prevent water from soaking into the fibres without compromising breathability. The water beads up on the surface of the fabric allowing it to roll off, therefore shortening the drying time. ...

The Thirty Two Reppin Hoody is a great bit of streetwear with fearsome styling & a practical edge. This super warm zip hoody incorporates STI Repel technology, which prevents water from soaking into the fibres, helping you to stay drier for longer. It is great for use as part of a layering system & perfect as an outer layer for urban use on those cooler days. Features STI Repel Technology Full zip 2 Zipped handwarmer pockets Adjustable drawcord hood Glossary STI Repel Technology STI Repel Technology is a finish that is applied to the fabric to prevent water from soaking into the fibres without compromising breathability. The water beads up on the surface of the fabric allowing it to roll off, therefore shortening the drying time. ...

The Thirty Two Shakedown Jacket is for cruising the hill & hitting the street in style. Part of the JP Walker signature series, the Shakedown jacket has a laid back relaxed fit & bold graphic repping the br&. Water resistant & breathable, there is plenty of room for an extra layer when the mercury drops & enough protection for you to have some fun on the mountain. Features Micro Rip Stop Waterproof Rating: 8000mm, Breathability Rating: 8000g Zip Mesh Vents Critical taped seams Wrist Gaiters Waist Gaiters Adjustable fixed hood Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system. ...

The Thirty Two Shiloh 2 Jacket brings urban styling to the mountain. Waterproof & breathable this big, bad & bold jacket has a laidback, relaxed fit that leaves plenty of room for layering if the temperature drops. A peaked storm hood gives you a bit of extra protection when the weather closes in & the fully taped seams & internal gaiters make sure that the powder stays on the hill when your adventure takes you off the beaten track. Features

Fabric: Textured Nylon Waterproof Rating: 10 000mm, Breathability rating: 10, 000g Zip mesh vents Fully taped seams Wrist gaiters Waist gaiters Adjustable hood Adjustable cuffs Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.

...

The Thirty Two Shiloh 2 Jacket brings urban styling to the mountain. Waterproof & breathable this big, bad & bold jacket has a laidback, relaxed fit that leaves plenty of room for layering if the temperature drops. A peaked storm hood gives you a bit of extra protection when the weather closes in & the fully taped seams & internal gaiters make sure that the powder stays on the hill when your adventure takes you off the beaten track. Features

Fabric: Textured Nylon Waterproof Rating: 10 000mm, Breathability rating: 10, 000g Zip mesh vents Fully taped seams Wrist gaiters Waist gaiters Adjustable hood Adjustable cuffs Glossary Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.

...

The 32 Prion FT is a super comfortable & lightweight all-mountain boot with a forgiving medium flex. It features 32's Patent Pending Fast Track Lacing System, & has a rubber outsole with EVA cushioning for durable shock absorption & a 3D Moulded Tongue for easier lacing & a secure fit. It also has a Level 1 Liner & a Level 1 Ortholite Footbed.
Features: Comfort Fit
- Level 1 Liner Level 1 Ortholite Footbed Fast Track Lacing System Rubber outsole w/EVA cushioning 3D Moulded Tongue Internal Lacing System Flex Rating 4/10 (1=soft/10=stiff) Glossary: Level 1 Liner:100% heat mouldable single density soft touch EVA* foam for added comfort & warmth. Lacing system w/lace lock for enhanced heel hold & fit. Internal anatomical EVA* overlays in heel for optimal hold. Aegis anti-microbial coating eliminates odour. Level 1 Ortholite Footbed: Moulded Ortholite footbed w/spring-back tech, retains 95% of its thickness over time & won't flatten out. Fuzzy topsheet. Ortholite Footbed: Open pored PU foam with high breathability, good wicking, long-life damping & anti-bacterial function. Upper made from fine textile fabric. Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day.EVA: Ethylene Vinyl Acetate, a polymer used to absorb physical shock. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.

...

The Prion quickly became one of our hot sellers last season because of the fit, flex & quick lacing system. The Fast Track system quickly means that you can customise both upper & lower lacing zones making them very easy to get on & off. The medium flex make it suitable for riders looking for a little more play or beginners that like quicker less fussy lacing. Features Team Fit
- Level 2 Liner Level 1 Footbed Fast Track Lacing System Articulating Cuff 3D Moulded Tongue Flex Rating 3/10 (1=soft/10=stiff) Glossary Level 2 Liner:100% Heat Moldable Intuition, Ultralon Liners. Single Density Intuition Ultralon foam for comfort, warmth & support. Lacing System with Lace Lock for enhanced heel hold & fit. Internal anatomical EVA overlays in heel for optimal heel hold & Aegis anti-microbial coating to eliminate odor. Level 1 Footbed: Molded Ortholite Footbed provides spring-back technology, retaining 95% of its thickness over time & won't flatten out. Lightweight providing optimum performance. Fuzzy topsheet for warmth & comfort Fast Track Lacing System: Features 32's Patent Pending 4 zone lacing, handle storage & 1-piece lock. The 1-pull handle controls the upper zone & the other handle controls the lower zone. Flip the lock up to secure for the rest of the day. 3D moulded tongue: Wraps the foot for enhanced fit & heel hold.
...