The Spyder Leader Jacket is pieced together to give you the comfort & freedom to take on the whole mountain. Flexible fabric is used for the outer fabric, which allows un-constricted movement whilst providing waterproof & breathable protection. Lightweight, 3M Thinsulate insulation provides excellent warmth targeting key areas of the upper body for optimum heat distribution. There is a host of innovative features on board providing extra protection & ventilation when you need it & enough well thought out pockets to keep all of essentials to hand wherever your adventure takes you. Features

Fabric: Stretch Polyester Oxford with Xt.L 20k/20k Laminate & Spylon+ DWR
Lining: Custom Embossed Nylon Taffeta Insulation: Thinsulate with Extra Warmth- 100g Body/80g Sleeves Fully Taped Seams Anti-abrasion brushed metal overlay film Removable helmet-compatible hood with adjustable opening Waterproof 2-way centre front zipper Waterproof hand & chest pocket zippers Core ventilation system Removable powder skirt with stretch panel Snap back feature holds powder skirt away when not in use Velcro adjustable cuffs with gussets Interior stretch cuffs with thumbholes Data card pocket Back zippered pocket Internal zippered pocket Internal mesh goggle pocket Drawcord adjustable hem Chamois lens wipe Glossary Xt.L 20k/20k Laminate An ultra-thin membrane with exceptional waterproof/breathable properties. This technology results in pliable fabrics that are lightweight yet durable. Benefits include stretch recovery, which maintains the integrity of the fabric so that it performs as new even after seasons of hardcore abuse. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g/m 2/24hr. Spylon+ DWRDurable Water Repellent finish applied to fabric exterior to prevent the garment from absorbing surface moisture. It has a durable water repellency of 80% after 50 washings. It also guards against water & oil-based stains. Thinsulate with Extra Warmth Made using thin microfibres that efficiently trap insulating air, reflect radiant body heat & deliver warmth 2x greater than down & other polyester insulations when equal thicknesses are compared. This version has been specially created to provide extra thermal protection. Fully Taped Seams Every single seam is taped with a high quality waterproof b&. Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.


...

The Spyder Leader Jacket is pieced together to give you the comfort & freedom to take on the whole mountain. Flexible fabric is used for the outer fabric, which allows un-constricted movement whilst providing waterproof & breathable protection. Lightweight, 3M Thinsulate insulation provides excellent warmth targeting key areas of the upper body for optimum heat distribution. There is a host of innovative features on board providing extra protection & ventilation when you need it & enough well thought out pockets to keep all of essentials to hand wherever your adventure takes you. Features

Fabric: Stretch Polyester Oxford with Xt.L 20k/20k Laminate & Spylon+ DWR
Lining: Custom Embossed Nylon Taffeta Insulation: Thinsulate with Extra Warmth- 100g Body/80g Sleeves Fully Taped Seams Anti-abrasion brushed metal overlay film Removable helmet-compatible hood with adjustable opening Waterproof 2-way centre front zipper Waterproof hand & chest pocket zippers Core ventilation system Removable powder skirt with stretch panel Snap back feature holds powder skirt away when not in use Velcro adjustable cuffs with gussets Interior stretch cuffs with thumbholes Data card pocket Back zippered pocket Internal zippered pocket Internal mesh goggle pocket Drawcord adjustable hem Chamois lens wipe Glossary Xt.L 20k/20k Laminate An ultra-thin membrane with exceptional waterproof/breathable properties. This technology results in pliable fabrics that are lightweight yet durable. Benefits include stretch recovery, which maintains the integrity of the fabric so that it performs as new even after seasons of hardcore abuse. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g/m 2/24hr. Spylon+ DWRDurable Water Repellent finish applied to fabric exterior to prevent the garment from absorbing surface moisture. It has a durable water repellency of 80% after 50 washings. It also guards against water & oil-based stains. Thinsulate with Extra Warmth Made using thin microfibres that efficiently trap insulating air, reflect radiant body heat & deliver warmth 2x greater than down & other polyester insulations when equal thicknesses are compared. This version has been specially created to provide extra thermal protection. Fully Taped Seams Every single seam is taped with a high quality waterproof b&. Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.


...

The Spyder Leader Jacket is pieced together to give you the comfort & freedom to take on the whole mountain. Flexible fabric is used for the outer fabric, which allows un-constricted movement whilst providing waterproof & breathable protection. Lightweight, 3M Thinsulate insulation provides excellent warmth targeting key areas of the upper body for optimum heat distribution. There is a host of innovative features on board providing extra protection & ventilation when you need it & enough well thought out pockets to keep all of essentials to hand wherever your adventure takes you. Features

Fabric: Stretch Polyester Oxford with Xt.L 20k/20k Laminate & Spylon+ DWR
Lining: Custom Embossed Nylon Taffeta Insulation: Thinsulate with Extra Warmth- 100g Body/80g Sleeves Fully Taped Seams Anti-abrasion brushed metal overlay film Removable helmet-compatible hood with adjustable opening Waterproof 2-way centre front zipper Waterproof hand & chest pocket zippers Core ventilation system Removable powder skirt with stretch panel Snap back feature holds powder skirt away when not in use Velcro adjustable cuffs with gussets Interior stretch cuffs with thumbholes Data card pocket Back zippered pocket Internal zippered pocket Internal mesh goggle pocket Drawcord adjustable hem Chamois lens wipe Glossary Xt.L 20k/20k Laminate An ultra-thin membrane with exceptional waterproof/breathable properties. This technology results in pliable fabrics that are lightweight yet durable. Benefits include stretch recovery, which maintains the integrity of the fabric so that it performs as new even after seasons of hardcore abuse. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g/m 2/24hr. Spylon+ DWRDurable Water Repellent finish applied to fabric exterior to prevent the garment from absorbing surface moisture. It has a durable water repellency of 80% after 50 washings. It also guards against water & oil-based stains. Thinsulate with Extra Warmth Made using thin microfibres that efficiently trap insulating air, reflect radiant body heat & deliver warmth 2x greater than down & other polyester insulations when equal thicknesses are compared. This version has been specially created to provide extra thermal protection. Fully Taped Seams Every single seam is taped with a high quality waterproof b&. Waterproof Rating This is measured & expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube & clamp their material over the bottom end. They will then fill the tube slowly with water & watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, & on average, outerwear fabrics tend to have a hydrostatic head of 10000mm & above. Breathability Rating Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m 2/24). For general use, 10000g/m 2/24 & above is desirable. It should be noted that breathable fabrics do not stop you sweating & care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers & fleece or insulated midlayers should in themselves draw vapour from the body & pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system.


...

The Spyder Leader Jacket proves popular with our customers season after season due to its advanced technical features & bold, dynamic look. A signature piece of the Spyder range, the jackets race inspired design brings you vibrant block colours & faultless protection, courtesy of 20K/20K waterproofing & breathability, & cleverly distributed lightweight insulation that ensures optimal warmth for all-day comfort. Features Removable helmet compatible hood with adjustable opening Fully seam taped Anti-abrasion brushed metal overlay film Waterproof two-way centre front zipper Waterproof hand & chest pocket zippers Core ventilation system Removable powder skirt with stretch panel Snap back feature holds powder skirt away when not in use Velcro adjustable cuffs with gussets Interior stretch cuffs with thumb holes Data card pocket Back zippered pocket Internal zippered pocket Internal mesh goggle pocket Drawcord adjustable hem Chamois lens wipe Body
- Stretch Polyester Oxford with Xt.L 20k/20k Laminate & Spylon+ DWR Lining
- Custom Embossed Nylon Taffeta Body
- 3M Thinsulate Insulation with Extra Warmth (100g) Sleeves
- 3M Thinsulate Insulation with Extra Warmth (80g) Glossary Spylon+:A DWR (Durable Water Repellent) finish applied to the fabric exterior that prevents it absorbing surface moisture. It has a DWR of 80% after 50 washes & also guards against water & oil-based stains. Thinsulate:A breathable, water-resistant & durable insulation constructed from unique, high-loft microfibres that provides increased warmth with less bulk for greater mobility. Xt.L 20k/20k Laminate: An ultra-thin membrane with exceptional waterproof/breathable properties. This technology results in pliable fabrics that are lightweight yet durable. Benefits include stretch recovery, which maintains the integrity of the fabric so that it performs as new even after seasons of hardcore abuse. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g/m 2/24hr.



...

The Spyder Leader Jacket proves popular with our customers season after season due to its advanced technical features & bold, dynamic look. A signature piece of the Spyder range, the jackets race inspired design brings you vibrant block colours & faultless protection, courtesy of 20K/20K waterproofing & breathability, & cleverly distributed lightweight insulation that ensures optimal warmth for all-day comfort. Features Removable helmet compatible hood with adjustable opening Fully seam taped Anti-abrasion brushed metal overlay film Waterproof two-way center front zipper Waterproof hand & chest pocket zippers Core ventilation system Removable powder skirt with stretch panel Snap back feature holds powder skirt away when not in use Velcro adjustable cuffs with gussets Interior stretch cuffs with thumb holes Data card pocket Back zippered pocket Internal zippered pocket Internal mesh goggle pocket Drawcord adjustable hem Chamois lens wipe Body
- Stretch Polyester Oxford with Xt.L 20k/20k Laminate & Spylon+ DWR Lining
- Custom Embossed Nylon Taffeta Body
- 3M Thinsulate Insulation with Extra Warmth (100g) Sleeves
- 3M Thinsulate Insulation with Extra Warmth (80g) Glossary Spylon+:A DWR (Durable Water Repellent) finish applied to the fabric exterior that prevents it absorbing surface moisture. It has a DWR of 80% after 50 washes & also guards against water & oil-based stains. Thinsulate:A breathable, water-resistant & durable insulation constructed from unique, high-loft microfibres that provides increased warmth with less bulk for greater mobility. Xt.L 20k/20k Laminate: An ultra-thin membrane with exceptional waterproof/breathable properties. This technology results in pliable fabrics that are lightweight yet durable. Benefits include stretch recovery, which maintains the integrity of the fabric so that it performs as new even after seasons of hardcore abuse. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g/m 2/24hr.



...

The Spyder Monterosa Jacket uses cutting edge technology in a modern alpine design. Its combination of fabrics, features & insulation keep you warm, dry & comfortable from first to last lift.
Features: Body stretch fabric with OSMO & Spylon DWR Overlay fabric with Xt.L laminate & Spylon DWR Stretch taffeta lining 60g Primaloft Sport insulation (body/sleeves) Dry WEB tech Fully seam sealed Bemis anti-abrasion overlay film Full stretch interior Core vent zippers Removable heavy weather hood Zip-out stretch powder skirt Left sleeve pocket Zippered internal pocket Web mesh goggle pocket Movable chamois goggle wipe on shock cord Adjustable cuffs Stretch inner cuffs Glossary:OSMO: Exclusive super breathable laminate system that achieves world-class breathability based on the inherent properties of osmosis, the diffusion of fluid through a membrane. Waterproof Rating: 20, 000mm. Breathability Rating: 30, 000g. Spylon DWR: Durable Water Repellent finish applied to fabric exterior to prevent the garment from absorbing surface moisture. It has a durable water repellency of 80% after 20 washings. It also guards against water & oil-based stains. Xt.L: An ultra-thin membrane that delivers superior waterproofness & breathability. Xt.L benefits include stretch recovery, which maintains the integrity of the fabric after seasons of hard-core use. Waterproof Rating: 20, 000mm. Breathability Rating: 20, 000g. Primaloft Sport: The perfect combination of high performance insulation & value. Specially treated ultra-fine fibres help to form a water resistant insulating structure, while multi-diameter fibres help build loft. Dry WEB: Spun polyester on the inside pulls moisture away from the skin, & microfibre filament polyester on the surface disperses moisture for quick evaporation. Treated with an anti-microbial, non-pill finish, it resists odour-causing bacteria. Fully seam sealed: Unlike products with critical taped seams, every single seam is taped with a high quality waterproof b&.
...

The Spyder Outbound Half Zip Mid Wt Core Sweater provides comfortable warmth whether you are on the slopes or in the resort. The sweater is made from a soft mid-weight knit fabric with strategically placed stretch fleece panels intended to lock in your body heat whilst providing extra comfort & flexibility. Great as part of a layering system, the Half Zip Mid-Weight Core Sweater is extremely versatile as its smart & simple styling also makes it absolutely ideal for day-to day outdoor use. Features

Fabric: Body Core: Polyester mid-weight Sweater Knit with anti-pilling Fleece backing
Fabric: Accent 360 Stretch Microfleece Stretch Fleece panels in strategic locations Front half zipper Spyder embroidered logo Glossary Core Exclusive to Spyder, Core is a special weave rib-knit face material with fleece-backed fabric that has the look & feel of a sweater with the technical performance & comfort of a Softshell. It provides the benefits of wools warmth, the soft hand of cotton & the durability of polyester.


...

The Spyder Outbound Half Zip Mid Wt Core Sweater provides comfortable warmth whether you are on the slopes or in the resort. The sweater is made from a soft mid-weight knit fabric with strategically placed stretch fleece panels intended to lock in your body heat whilst providing extra comfort & flexibility. Great as part of a layering system, the Half Zip Mid-Weight Core Sweater is extremely versatile as its smart & simple styling also makes it absolutely ideal for day-to day outdoor use. Features

Fabric: Body Core: Polyester mid-weight Sweater Knit with anti-pilling Fleece backing
Fabric: Accent 360 Stretch Microfleece Stretch Fleece panels in strategic locations Front half zipper Spyder embroidered logo Glossary Core Exclusive to Spyder, Core is a special weave rib-knit face material with fleece-backed fabric that has the look & feel of a sweater with the technical performance & comfort of a Softshell. It provides the benefits of wools warmth, the soft hand of cotton & the durability of polyester.


...

The Spyder Outbound Half Zip Mid Wt Core Sweater provides comfortable warmth whether you are on the slopes or in the resort. The sweater is made from a soft mid-weight knit fabric with strategically placed stretch fleece panels intended to lock in your body heat whilst providing extra comfort & flexibility. Great as part of a layering system, the Half Zip Mid-Weight Core Sweater is extremely versatile as its smart & simple styling also makes it absolutely ideal for day-to day outdoor use. Features

Fabric: Body Core: Polyester mid-weight Sweater Knit with anti-pilling Fleece backing
Fabric: Accent 360 Stretch Microfleece Stretch Fleece panels in strategic locations Front half zipper Spyder embroidered logo Glossary Core Exclusive to Spyder, Core is a special weave rib-knit face material with fleece-backed fabric that has the look & feel of a sweater with the technical performance & comfort of a Softshell. It provides the benefits of wools warmth, the soft hand of cotton & the durability of polyester.


...

The Spyder Outbound Half Zip Mid Wt Core Sweater provides comfortable warmth whether you are on the slopes or in the resort. The sweater is made from a soft mid-weight knit fabric with strategically placed stretch fleece panels intended to lock in your body heat whilst providing extra comfort & flexibility. Great as part of a layering system, the Half Zip Mid-Weight Core Sweater is extremely versatile as its smart & simple styling also makes it absolutely ideal for day-to day outdoor use. Features

Fabric: Body Core: Polyester mid-weight Sweater Knit with anti-pilling Fleece backing
Fabric: Accent 360 Stretch Microfleece Stretch Fleece panels in strategic locations Front half zipper Spyder embroidered logo Glossary Core Exclusive to Spyder, Core is a special weave rib-knit face material with fleece-backed fabric that has the look & feel of a sweater with the technical performance & comfort of a Softshell. It provides the benefits of wools warmth, the soft hand of cotton & the durability of polyester.


...