You'll probably use your shovel most for digging snow pits, building tent platforms or even digging out your car. & most shovels will do an adequate job for these tasks. Unfortunately, because avalanche debris sets up so hard, a frighteningly large number of shovel fail when called upon for their most critical function of excavating a buried friend. This is why our shovels are designed for durability & utility. The K2 rescue Shovel Plus can also construct an emergency sled, build a dead man anchor, or provide a flat platform for your stove. Features Weight: 800g The Rescue Shovel Plus comes with a set of hardware tucked away inside the shaft that lets you quickly combine your shovel & Back Side or Factory Team skis & convert them into a solid rescue sled. ...

You'll probably use your shovel most for digging snow pits, building tent platforms or even digging out your car. & most shovels will do an adequate job for these tasks. Unfortunately, because avalanche debris sets up so hard, a frighteningly large number of shovel fail when called upon for their most critical function of excavating a buried friend. This is why our shovels are designed for durability & utility. The K2 rescue Shovel Plus can also construct an emergency sled, build a dead man anchor, or provide a flat platform for your stove. Features Weight: 695g The Rescue Shovel Plus comes with a set of hardware tucked away inside the shaft that lets you quickly combine your shovel & Back Side or Factory Team skis & convert them into a solid rescue sled. ...

The K2 Rival Pro is the helmet of choice for K2 athletes, thanks to its low-profile & lightweight design.
Features: In-Mould
...

The K2 Rival Pro is the helmet of choice for K2 athletes. The in-mold design is ultra-lightweight, simplistic, & performs perfectly for all day shredding. Features In-Mould construction Passive Channel Venting K2dialed Fit System Washable Full-Wrap Liner System Goggle Compatibility Level 3 Baseline Audio System Weight: 394g Glossary In-Mould construction: The premium construction for ultra-lightweight performance helmets that is characterized by an EPS liner bonded to a lightweight poly-carbonate (PC) shell using a distinct moulding process. Unlike Hard-Shell construction, the lightweight EPS inner layer of the helmet is fused directly to the thin PC shell during moulding. The result is a super light & protective envelope with minimal weight. Passive Channel Venting: Channels on the inside surface of the EPS direct air-flow between your head & the helmet, removing moisture & excess heat; keeping you dry & comfortable all day long. K2dialed Fit System: Creates a custom-fitting helmet no matter what your head shape. An ergonomically inspired three-point adjustable interface maximizes fit & customization with the twist of a dial. This allows for the ultimate convenience of being able to make fit adjustments on the fly. The end result of the K2dialed Fit System is customized helmet fit just for you. Full-Wrap Liner System:A full-coverage, washable liner featuring a crown mesh that wicks moisture & breathes where you need it to while snugly cradling your head. The Full-Wrap Liner System is seamlessly integrated with the K2dialed Fit System & K2 Baseline Audio, creating the ultimate user experience. No gaps equals better fit & more comfort. Level 3 Baseline Audio System: Low profile speakers pre-installed in the exclusive Baseline Audio Earpads that connect to your cell phone or your mp 3 player allowing you to be connected while on the hill. There's no need to worry about compatibility or buying a separate accessory for your mp 3 player or phone when everything you need comes with the helmet.

Features: Detachable cord with mini-mic, single squeeze button for pause/play & answer/hang up. If you would rather ride without music or phone connection, the speakers are easily removable from the earpads.

...

The K2 Rival Pro is the helmet of choice for K2 athletes. The in-mold design is ultra-lightweight, simplistic, & performs perfectly for all day shredding. Features In-Mould construction Passive Channel Venting K2dialed Fit System Washable Full-Wrap Liner System Goggle Compatibility Level 3 Baseline Audio System Weight: 394g Glossary In-Mould construction: The premium construction for ultra-lightweight performance helmets that is characterized by an EPS liner bonded to a lightweight poly-carbonate (PC) shell using a distinct moulding process. Unlike Hard-Shell construction, the lightweight EPS inner layer of the helmet is fused directly to the thin PC shell during moulding. The result is a super light & protective envelope with minimal weight. Passive Channel Venting: Channels on the inside surface of the EPS direct air-flow between your head & the helmet, removing moisture & excess heat; keeping you dry & comfortable all day long. K2dialed Fit System: Creates a custom-fitting helmet no matter what your head shape. An ergonomically inspired three-point adjustable interface maximizes fit & customization with the twist of a dial. This allows for the ultimate convenience of being able to make fit adjustments on the fly. The end result of the K2dialed Fit System is customized helmet fit just for you. Full-Wrap Liner System:A full-coverage, washable liner featuring a crown mesh that wicks moisture & breathes where you need it to while snugly cradling your head. The Full-Wrap Liner System is seamlessly integrated with the K2dialed Fit System & K2 Baseline Audio, creating the ultimate user experience. No gaps equals better fit & more comfort. Level 3 Baseline Audio System: Low profile speakers pre-installed in the exclusive Baseline Audio Earpads that connect to your cell phone or your mp 3 player allowing you to be connected while on the hill. There's no need to worry about compatibility or buying a separate accessory for your mp 3 player or phone when everything you need comes with the helmet.

Features: Detachable cord with mini-mic, single squeeze button for pause/play & answer/hang up. If you would rather ride without music or phone connection, the speakers are easily removable from the earpads.

...

The Ryker is an ultra light weight boot suitable for all types of riding. It features a combination of K2s patended Conda System to control the liner & Boa Conda closure. This makes it probably one of the easiest boots out there to get on & off. The Ryker also gets upgraded to the New Phy-Light outsole with harsmellow for a lighter, more cushioned feel. Additional extras include Moldable internal J bars & intuition foam liner for a glove like fit. One of our fastest sellers for the last 2 seasons. Features Flex Rating: 6 (1=most/10=least) Boa Coiler lacing system Conda System liner lacing Intuition Control Foam 3D liner w/mouldable external J-Bars & integrated power strap 3D formed EVA footbed w/ Harshmellow Low-Pro outsole w/ Harshmellow 3D formed tongue Asym articulating cuff Glossary Boa Coiler: Turn the dial to tighten the cable. Retracts loose cable & minimizes closure turns, making it one of the fastest Boas ever. Conda System:A minimized harness built into the shell of the boot means that you can tighten, loosen or adjust the liner from the outside of the boot using a simple & easy to use single pull locking system. Intuition Control Foam 3D liner: Uses a blend of high & standard density thermo-forming Ultralon foam. Designed to be custom moulded to the foot, it is lightweight, flexible & durable, & has a 3D moulded EVA insole w/ Harshmellow pods. Harshmellow:A magical rubber compound that dampens vibrations, absorbs shock & minimized rebound for softer more controlled landings. Low-Pro Outsole:A lightweight & solid rubber cupsole that grips, lasts long & doesn't break the budget. ...

The K2 Sapera is a mid flexing boot & one of the most comfortable & easy to use on the market. It features a luxurious, fur-lined ...

Seth continues to evolve as a skier & the K2 Side Seth
- along with its new home in the Backside collection
- reflects his

...

Not only does the Side Shows metal laminate construction & moderate waist rail groomers & frozen corn with complete confidence, but the addition of All Terrain rocker means it puts your old powder skis to shame in soft stuff too. Weighing in at 1900g per pair (for the 181cm ski) the Side Show is one of the lightest downhill orientated backside skis we carry. Combine the Side Show with a pair of pre cut K2 skins, Marker F12s, Backside carbon poles & the Pichuck kit & youre ready to hit the backcountry with complete confidence. Ability Level
- 5-9 Spec For (181cm): Radius: 20m Nose

Width: 132mm Waist

Width: 90mm Tail

Width: 115mm Features Ski Type: Freeride All Terrain Rocker Performance: 50% Powder / 50% Variable Construction: Metal TNC, Hybritech Sidewall, Aspen/ Paulownia Weight: 1900g Progressive Sidecut Tip & Tail Hardware Glossary All Terrain Rocker All-Terrain Rocker features an elevated tip for variable & soft snow performance, as well as camber underfoot for power, energy, & edge-hold in firmer conditions. Simply put, All-Terrain Rocker offers versatility & ease in all snow conditions./td> Progressive Sidecut Progressive sidecut is a combination of two different radii, or sidecuts, that enhance the versatility of wider-waist skis. Standard sidecut theory is based on using a single radius. This works well on narrower skis, but becomes overpowering on wider skis, especially in variable conditions. The use of progressive sidecut on wider-waist skis guarantees enhanced turn initiation & hard-snow performance. Tip & Tail Hardware Holes in the tip & tail are not only the attachments points for K2 skins, but they also fit the functional needs of a backcountry skier including the ability to build a rescue sled or construct various ski anchors. The holes are equipped with removable plugs.






...

The K2 Sidestash belongs to K2s enhanced Backside series of big mountain skis. The elongated All Terrain rocker & generous waist width create a nimble & forgiving big mountain ski that can charge tight chutes & open faces alike. The metal laminate sidewall construction delivers a damp, powerful platform for slicing through chop or laying trenches on the groomers. K2 have been working very hard on their Backside collection of skis in order to give us the best &34;tools for adventure&34; & the Sidestash is definitely one of the best big mountain skis that we tested last winter. Combine the Sidestash with a pair of pre cut K2 skins, Marker Barons, Backside carbon poles & the Pichuck kit & youll be ready to hit the backcountry with complete confidence. Ability Level
- 7-10 Spec For (181cm): Radius: 25m Nose

Width: 139mm Waist

Width: 108mm Tail

Width: 127mm Features Ski Type: Big Mountain Powder Rocker Performance: 70% Powder / 30% Variable Construction: Metal TNC, Hybritech Sidewall, Aspen/ Paulownia Weight: 2170g Powder Tip Progressive Sidecut Tip & Tail Hardware Glossary Powder Rocker This tip has the most elevation & longest measurement of Rocker & offers skiers a &34;surfy&34; feel with enhanced soft-snow performance. The camber region still exists to ensure edge-hold on firmer conditions. Simply put, Powder Rocker provides unmatched flotation in deep snow. Progressive Sidecut Progressive sidecut is a combination of two different radii, or sidecuts, that enhance the versatility of wider-waist skis. Standard sidecut theory is based on using a single radius. This works well on narrower skis, but becomes overpowering on wider skis, especially in variable conditions. The use of progressive sidecut on wider-waist skis guarantees enhanced turn initiation & hard-snow performance. Tip & Tail Hardware Holes in the tip & tail are not only the attachments points for K2 skins, but they also fit the functional needs of a backcountry skier including the ability to build a rescue sled or construct various ski anchors. The holes are equipped with removable plugs.






...