More From Contributor

£15.99
81 Customs Grind Stunt Pegs. The pegs fit as standard, Razor Ultra, JD Bug, & the Madd MGP, Team Editions, Nitro, Ninja & lots more. So what makes these Grind pegs strongersimply
- the axle continues through the deck, the peg then tightens over the axle & doesnt sit against the thread. This takes away the risk of shearing & the pegs as a result become stronger. Contents: Pair of Aluminum CNC turned Pegs with Internal Thread Peg Size
- 50mm Long x 19mm Diameter Four High Tensile Axle Bolts Four washers Installing the pegs is simple. The kit comes with 4 different sized axles & 4 washers. Choose the appropriate axle for your scooter (the non-threaded part of the axle shaft must continue out of the deck /forks Approx. 3-4mm). Remove the back axle from your deck, slide the washer (s) onto the new HT axle. Once the axle is in place, thread the new peg on until tight. Hold the peg & tighten the axle with an allen key. Follow this process on the front forks & you are ready to go

...
Archived Product
£15.99
81 Customs Grind Stunt Pegs. The pegs fit as standard, Razor Ultra, JD Bug, & the Madd MGP, Team Editions, Nitro, Ninja & lots more. So what makes these Grind pegs strongersimply
- the axle continues through the deck, the peg then tightens over the axle & doesnt sit against the thread. This takes away the risk of shearing & the pegs as a result become stronger. Contents: Pair of Aluminum CNC turned Pegs with Internal Thread Peg Size
- 50mm Long x 19mm Diameter Four High Tensile Axle Bolts Four washers Installing the pegs is simple. The kit comes with 4 different sized axles & 4 washers. Choose the appropriate axle for your scooter (the non-threaded part of the axle shaft must continue out of the deck /forks Approx. 3-4mm). Remove the back axle from your deck, slide the washer (s) onto the new HT axle. Once the axle is in place, thread the new peg on until tight. Hold the peg & tighten the axle with an allen key. Follow this process on the front forks & you are ready to go.

...
Archived Product
£15.99
81 Customs Grind Stunt Pegs. The pegs fit as standard, Razor Ultra, JD Bug, & the Madd MGP, Team Editions, Nitro, Ninja & lots more. So what makes these Grind pegs strongersimply
- the axle continues through the deck, the peg then tightens over the axle & doesnt sit against the thread. This takes away the risk of shearing & the pegs as a result become stronger. Contents: Pair of Aluminum CNC turned Pegs with Internal Thread Peg Size
- 50mm Long x 19mm Diameter Four High Tensile Axle Bolts Four washers Installing the pegs is simple. The kit comes with 4 different sized axles & 4 washers. Choose the appropriate axle for your scooter (the non-threaded part of the axle shaft must continue out of the deck /forks Approx. 3-4mm). Remove the back axle from your deck, slide the washer (s) onto the new HT axle. Once the axle is in place, thread the new peg on until tight. Hold the peg & tighten the axle with an allen key. Follow this process on the front forks & you are ready to go

...
Archived Product
£15.99
81 Customs Grind Stunt Pegs. The pegs fit as standard, Razor Ultra, JD Bug, & the Madd MGP, Team Editions, Nitro, Ninja & lots more. So what makes these Grind pegs strongersimply
- the axle continues through the deck, the peg then tightens over the axle & doesnt sit against the thread. This takes away the risk of shearing & the pegs as a result become stronger. Contents: Pair of Aluminum CNC turned Pegs with Internal Thread Peg Size
- 50mm Long x 19mm Diameter Four High Tensile Axle Bolts Four washers Installing the pegs is simple. The kit comes with 4 different sized axles & 4 washers. Choose the appropriate axle for your scooter (the non-threaded part of the axle shaft must continue out of the deck /forks Approx. 3-4mm). Remove the back axle from your deck, slide the washer (s) onto the new HT axle. Once the axle is in place, thread the new peg on until tight. Hold the peg & tighten the axle with an allen key. Follow this process on the front forks & you are ready to go.

...
Archived Product
£15.99
81 Customs Grind Stunt Pegs. The pegs fit as standard, Razor Ultra, JD Bug, & the Madd MGP, Team Editions, Nitro, Ninja & lots more. So what makes these Grind pegs strongersimply
- the axle continues through the deck, the peg then tightens over the axle & doesnt sit against the thread. This takes away the risk of shearing & the pegs as a result become stronger. Contents: Pair of Aluminum CNC turned Pegs with Internal Thread Peg Size
- 50mm Long x 19mm Diameter Four High Tensile Axle Bolts Four washers Installing the pegs is simple. The kit comes with 4 different sized axles & 4 washers. Choose the appropriate axle for your scooter (the non-threaded part of the axle shaft must continue out of the deck /forks Approx. 3-4mm). Remove the back axle from your deck, slide the washer (s) onto the new HT axle. Once the axle is in place, thread the new peg on until tight. Hold the peg & tighten the axle with an allen key. Follow this process on the front forks & you are ready to go

...
Archived Product
£19.99
Bullet Grom Kids Helmet. Matt Pink. Shell: High Density ABS Injection Moulded Liner: EPS Polystyrene / Foam Ventilation: 12 Vent cooling system Inner Padding: 3 piece removable & washable Safety Certificate: CE EN 1078 Sizing:XS/S: 48
- 51cm M: 52
- 53cm

...
Archived Product

Gripper Cush Lakai Socks

StanceGripper Cush LakaiSocks. Royal. Price per pair. S/M: Size 5 - 7.5 L/XL: 8 - 11 Features: 42% coolmax40% combed cotton12% polyester6% spandex Coolmax+ Left Right specific toe shape+ gripper cushion pads+ elastic arch support+ Seamless toe closure+ Y gore seam+ Deep heel pocket+ Self adjusting welt cuff+ Mesh vents+ signature logo
RIP - This product is no longer available on our network. It was last seen on 26.10.2016

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Skate Shack
  • SKU: 5310
Availability: In Stock
£13.99

Product Description

Stance Gripper Cush Lakai Socks. Royal. Price per pair. S/M: Size 5
- 7.5 L/XL: 8
- 11
Features: 42% coolmax 40% combed cotton 12% polyester 6% spandex Coolmax+ Left Right specific toe shape+ gripper cushion pads+ elastic arch support+ Seamless toe closure+ Y gore seam+ Deep heel pocket+ Self adjusting welt cuff+ Mesh vents+ signature logo

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Socks - A garment worn on the feet
Size - is the measurement of how big an object is in space.
Heel - Something that comonly belongs to a shoe, can give height particually in ladies shoes.
Logo - A symbol that is usually associated with a brand or product.
Cuff - A band of fabric towards the end of a sleeve that can be turned back or fastened usually with a button.
Pocket - A bag shaped insert in clothing used to carry items
Mesh - A material mad up of crossed over fibres such as metal or thread.

Supplier Information

Skate Shack
Page Updated: 2015-04-11 04:06:06

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu