Wire suspension kit for use with Phoebe LED Galanos Arteson ceiling panels. Drop length adjustable from 50 to 950mm. For use with part codes SL6262, SL6263, SL6264 & SL6265. ...

Phoebe LED 10w Portable Work Light. This compact portable LED work light comes with a built in rechargeable battery which can last up to 4 on a single charge. Ideal for professional tradesmen, mechanics & DIY enthusiasts a like. Its perfect for use around the home, workshop, worksite, or garage. This high performance portable floodlight can light up any space indoors or out. Perfect for emergency use or even to take with you on camping / fishing trips. It's crisp 6000k colour output also makes suitable as an alternative light source for photographers. High impact & shatter resistant design This work light is suitable for outdoor use thanks to its IP65 rated, robust die-cast aluminium casing with a durable powder-coated finish. This work light also

Includes:: a sealed, weather protected on/off switch. Energy saving LED uses less power than traditional work lights The energy saving LED uses Approx. 90% less power & therefore costs less to use & lasts longer than a traditional halogen work light. As a result the Phoebe portable LED work light also produces less heat than traditional work lights making it perfect for working comfortably in confined spaces. Features Can be powered / recharged by mains charger or 12v DC in car charger (Both included) Provides up to 4 hours continuous product use from a single charge. (Charging time:5-6 hours) Complete with soft-grip handle & a sturdy, fully adjustable stand that can be rotated to any angle. Produces 800 lumens which is equivalent to a 60w Halogen floodlight. Cool operating temperature for comfort & safety. Pack

Includes:: In-car charger & mains adaptor. Weight: 1.5kg Dimensions: 145x 240x 160mm Magnetic feet kit, also available.



...

A 100cm female to male connecting lead, designed to connect Phoebe LED link lights together. Ideal to replace the 20cm Link-Lead included with the link lights, allowing you to daisy-chain up to 9m of Phoebe LED link lighting giving you the option to create a continuous, seamless linear effect that looks great when positioned underneath long lines of kitchen cupboards and/or cabinets. Suitable for use only with the Phoebe LED Link-Light system 1000mm length Female-male connector Please not that this component is only compatible with Phoebe LED Link-Light components. Please note that this component is only compatible with Phoebe LED Link-Light components. ...

A 50cm female to male connecting lead, designed to connect Phoebe LED link lights together. Ideal to replace the 20cm Link-Lead included with the link lights, allowing you to daisy-chain up to 9m of Phoebe LED link lighting giving you the option to create a continuous, seamless linear effect that looks great when positioned underneath long lines of kitchen cupboards and/or cabinets. Suitable for use only with the Phoebe LED Link-Light system 500mm length Female-male connector Please not that this component is only compatible with Phoebe LED Link-Light components. Please note that this component is only compatible with Phoebe LED Link-Light components. ...

Recessed mounting kit. For use with Phoebe LED Krios Emergency Exit Blade (Part code: 6423) ...

1.5m drop suspension kit. For use with Phoebe LED Krios Emergency Exit Blade (Part code: 6423) ...

Phoebe LED's range of single & twin batten fittings has been designed specifically for use with Crompton's range of 6ft T8 LED Tubes This particular version accommodates two 6ft tubes & removes the need for a separate LED starter. The necessary control gear has been incorporated into the design of the batten, so all you have to do is wire it into the mains & install the tube. The batten can be attached to the ceiling by a series of eyelets that have been drilled into the outer edge of the fitting's robust steel body. The body itself has been treated with a white powder-coated finish that reinforces it against knocks & abrasions while warding off corrosion. Important: this LED T8 batten fitting has been wired specifically for & tested solely with Crompton's range of 6ft T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.4-foot length IP20 rated
- for indoor use only Fused terminal block for safety Dimensions: Width = 61mm, Height = 82mm, Length = 1227mm 5 year warranty These T8 battens are pre-wired to work with Crompton Lamps LED T8 tubes only.


...

Phoebe LED's range of single & twin batten fittings has been designed specifically for use with Crompton's range of T8 LED Tubes This particular version accommodates two 5ft tubes & removes the need for a separate LED starter. The necessary control gear has been incorporated into the design of the batten, so all you have to do is wire it into the mains & install the tube. The batten can be attached to the ceiling by a series of eyelets that have been drilled into the outer edge of the fitting's robust steel body. The body itself has been treated with a white powder coated finish that reinforces it against knocks & abrasions while warding off corrosion. Important: this LED T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.6-foot length IP20 rated
- for indoor use only Fused terminal block for safety Dimensions: Width = 101mm, Height = 86mm, Length = 1791mm 5 year warranty These T8 battens are pre-wired to work with Crompton Lamps LED T8 tubes only.


...

Phoebe LED's range of single & twin batten fittings has been designed specifically for use with Crompton's range of 6ft T8 LED Tubes This particular version accommodates two 6ft tubes & removes the need for a separate LED starter. The necessary control gear has been incorporated into the design of the batten, so all you have to do is wire it into the mains & install the tube. The batten can be attached to the ceiling by a series of eyelets that have been drilled into the outer edge of the fitting's robust steel body. The body itself has been treated with a white powder-coated finish that reinforces it against knocks & abrasions while warding off corrosion. Important: this LED T8 batten fitting has been wired specifically for & tested solely with Crompton's range of 6ft T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.6-foot length IP20 rated
- for indoor use only Fused terminal block for safety Dimensions: Width = 101mm, Height = 86mm, Length = 1791mm 5 year warranty


...

Flame tipped led candle light bulb. Ideal replacement for a 30W Bayonet incandescent candle light bulb saving 80% in energy consumption & lasting 25000 hours. Also known as a C35 candle light bulb due to its 35mm diameter. Suitable for chandeliers & candelabras. Very low energy consumption. Instant 100% light, no warm-up time. Can be easily fitted instead of ordinary light bulbs. Design,

Dimensions, comparable to an incandescent or halogen lamp. Features a BC-B22d bayonet (22mm) cap base.

...