The new Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools & other workplaces. This 40W LED panel light emits 3200 lumens of daylight light (6000K), with a wide 110 beam angle to illuminate rooms & corridors as efficiently as possible. Its long 30, 000-hour maintenance-free life means that once the LED panel light is installed, it will be years before it needs replacing again. The panels have a tough yet lightweight white powder coated aluminium frame, designed to match white ceiling grids perfectly. The Phoebe LED Gananos Atreson LED panel light can be installed in 3 easy ways;1) In a suspended ceiling you can simply remove a 600x 600 ceiling tile, or existing built-in fluorescent fixture, & replace with an LED panel light. This square LED ceiling panel light (actual size 595mm x 595mm x 30mm) is the most common size of LED panel light for installation in suspended ceilings.2) With a mounting frame, it is possible to mount the LED panel on a flat surface, both against a ceiling & against a wall. Mounting frames are sold separately.3) Using a suspension set. This consists of a kit with cables to hang on the ceiling. This means that you can determine the ideal height of the LED panel. Suspension kits are sold separately. Emergency Pack, which are designed & manufactured specifically for the Phoebe LED Galanos Arteson LED panels, are also available. These provide over 3 hours of maintained light output without the additional expense & inconvenience of separate emergency lighting. Please note, this panel is not suitable for dimming. ...

The new Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools & other workplaces. This 40W LED panel light emits 3200 lumens of warm white light (3000K), with a wide 110 beam angle to illuminate rooms & corridors as efficiently as possible. Its long 30, 000-hour maintenance-free life means that once the LED panel light is installed, it will be years before it needs replacing again. The panels have a tough yet lightweight white powder coated aluminium frame, designed to match white ceiling grids perfectly. The Phoebe LED Gananos Atreson LED panel light can be installed in 3 easy ways;1) In a suspended ceiling you can simply remove a 600x 600 ceiling tile, or existing built-in fluorescent fixture, & replace with an LED panel light. This square LED ceiling panel light (actual size 595mm x 595mm x 30mm) is the most common size of LED panel light for installation in suspended ceilings.2) With a mounting frame, it is possible to mount the LED panel on a flat surface, both against a ceiling & against a wall. Mounting frames are sold separately.3) Using a suspension set. This consists of a kit with cables to hang on the ceiling. This means that you can determine the ideal height of the LED panel. Suspension kits are sold separately. Emergency Pack, which are designed & manufactured specifically for the Phoebe LED Galanos Arteson LED panels, are also available. These provide over 3 hours of maintained light output without the additional expense & inconvenience of separate emergency lighting. Please note, this panel is not suitable for dimming. ...

A pack of 5x Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights which are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools & other workplaces. This 40W LED panel light emits 3200 lumens of warm white light (3000K), with a wide 110 beam angle to illuminate rooms & corridors as efficiently as possible. Its long 30, 000-hour maintenance-free life means that once the LED panel light is installed, it will be years before it needs replacing again. The panels have a tough yet lightweight white powder coated aluminium frame, designed to match white ceiling grids perfectly. The Phoebe LED Gananos Atreson LED panel light can be installed in 3 easy ways;1) In a suspended ceiling you can simply remove a 600x 600 ceiling tile, or existing built-in fluorescent fixture, & replace with an LED panel light. This square LED ceiling panel light (actual size 595mm x 595mm x 30mm) is the most common size of LED panel light for installation in suspended ceilings.2) With a mounting frame, it is possible to mount the LED panel on a flat surface, both against a ceiling & against a wall. Mounting frames are sold separately.3) Using a suspension set. This consists of a kit with cables to hang on the ceiling. This means that you can determine the ideal height of the LED panel. Suspension kits are sold separately. Emergency Pack, which are designed & manufactured specifically for the Phoebe LED Galanos Arteson LED panels, are also available. These provide over 3 hours of maintained light output without the additional expense & inconvenience of separate emergency lighting. Please note, this panel is not suitable for dimming. ...

The 4ft 20W Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required.A special feature of this batten is it's built-in emergency pack with 3-hour emergency battery (24-hour charge time) for those emergency occasions where there is a power disruption. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

The Lykos 4ft integrated LED batten light has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 20w to provide 2000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. The integrated microwave & dusk-til-dawn sensor automates the lighting function of the fitting when the presence of motion is detected. With sufficient ambient light, the batten will not switch on even when motion is detected. When there is insufficient ambient light the fitting will switch on when motion is detected
- after the hold time has elapsed the light will switch off if no more motion has been detected. The sensor has easy access to adjust daylight threshold settings, hold time (up to 30 minutes) & sensitivity of detection. The sensor can be overridden by switching the power to the fitting on/off 3 times. This Lykos single LED batten light comes with a 20W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently lowering costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting.
...

The 4ft 40W high output Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

The 4ft 40W high output Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required.A special feature of this batten is it's built-in emergency pack with 3-hour emergency battery (24-hour charge time) for those emergency occasions where there is a power disruption. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

The 5ft 30W Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required.A special feature of this batten is it's built-in emergency pack with 3-hour emergency battery (24-hour charge time) for those emergency occasions where there is a power disruption. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

The 5ft 30W Phoebe LED Oracle integrated LED batten with built-in microwave motion sensor features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. The integrated microwave & dusk-til-dawn sensor automates the lighting function of the batten when the presence of motion is detected. With sufficient ambient light, the batten will not switch on even when motion is detected. When there is insufficient ambient light the batten will switch on when motion is detected
- after the hold time has elapsed the light will switch off if no more motion has been detected. The sensor has easy access to adjust daylight threshold settings, hold time (up to 30 minutes) & sensitivity of detection. The sensor can be overridden by switching the power to the fitting on/off 3 times. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required.A special feature of this batten is it's built-in emergency pack with 3-hour emergency battery (24-hour charge time) for those emergency occasions where there is a power disruption. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming.
...

The Lykos 5ft integrated LED batten light has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. The integrated microwave & dusk-til-dawn sensor automates the lighting function of the fitting when the presence of motion is detected. With sufficient ambient light, the batten will not switch on even when motion is detected. When there is insufficient ambient light the fitting will switch on when motion is detected
- after the hold time has elapsed the light will switch off if no more motion has been detected. The sensor has easy access to adjust daylight threshold settings, hold time (up to 30 minutes) & sensitivity of detection. The sensor can be overridden by switching the power to the fitting on/off 3 times. This Lykos single LED batten light comes with a 30W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting.
...