The 6ft 80W high output Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

A pack of 5x 6ft 80W high output Phoebe LED Oracle integrated LED battens featuring CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

Phoebe LED IP65 Rated 6ft T8 Batten (Single) This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes. The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 ‘marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.

...

Phoebe LED 6ft T8 Batten (Single) Phoebe LED's range of single & twin batten fittings has been designed specifically for use with Crompton's range of T8 LED Tubes. This particular version accommodates a single 6ft tube & removes the need for a separate LED starter. The necessary control gear has been incorporated into the design of the batten, so all you have to do is wire it into the mains & install the tube. The batten can be attached to the ceiling by a series of eyelets that have been drilled into the outer edge of the fitting's robust steel body. The body itself has been treated with a white powder coated finish that reinforces it against knocks & abrasions while warding off corrosion. Important: this LED T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Not including the diffuser Tubes sold separately.

...

Phoebe LED IP65 Rated 6ft T8 Batten (Twin) This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes. The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 ‘marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.

...

Phoebe 900mm 11W LED Link-Light Create gorgeous, seamless linear lighting effects with this intuitive range of LED link-lights from Phoebe LED. This 900mm version is the second longest in the range & has been designed to replace compact fluorescent batten fittings of a similar length & brightness. Each kit

Includes:: the link-light itself, along with a 100cm power lead that connects directly to the mains. Crucially, it also contains a 20cm connecting lead that means that you can connect a number of these lamps together, up to a length of 9 metres. This creates a seamless linear effect that looks great underneath long lines of kitchen cupboards and/or cabinets. Each pack
Includes:: 1 x LED Link-Light 1 x End Cap 1 x Power Lead (100cm) 2 x Installation Brackets


...

Phoebe LED Mini Track Light Adjustable 2W 4000K Silver Designed for use with the Phoebe LED Mini Track Light system. Pick your own lights, tracks & connectors, & start building your own track light system. See the full range of Mini Track Light components here. This light is the perfect addition to any retail display, thanks to the excellent clarity & colour reproduction it offers. It emits a cool white 4000K light, with a focused 20° beam angle & impressive CRi ≥95 rating that will make the most of any display. It has a flexible head that can be adjusted up to an angle of 40°, & its magnetic 24V touch-safe system means that you can position it exactly where you want. With a long 30, 000 hour life, each light is built to last. Features 40° adjustable head Magnetic fitting for easy positioning Touch safe system 4000K cool white colour temperature RA Plus technology, CRi ≥95 rating 30, 000 hours average rated life Instant full light Requires 24V LED driver Non-dimmable For indoor use only Only for use with the Phoebe LED 24V Mini-track system ...

Phoebe LED Mini Track Light Adjustable 2W 4000K White Designed for use with the Phoebe LED Mini Track Light system. Pick your own lights, tracks & connectors, & start building your own track light system. See the full range of Mini Track Light components here. This light is the perfect addition to any retail display, thanks to the excellent clarity & colour reproduction it offers. It emits a cool white 4000K light, with a focused 20° beam angle & impressive CRi ≥95 rating that will make the most of any display. It has a flexible head that can be adjusted up to an angle of 40°, & its magnetic 24V touch-safe system means that you can position it exactly where you want. With a long 30, 000 hour life, each light is built to last. Features 40° adjustable head Magnetic fitting for easy positioning Touch safe system 4000K cool white colour temperature RA Plus technology, CRi ≥95 rating 30, 000 hours average rated life Instant full light Requires 24V LED driver Non-dimmable For indoor use only Only for use with the Phoebe LED 24V Mini-track system ...

The new Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools & other workplaces. This 38W LED panel light emits 3800 lumens of cool white light (4000K), with a wide 110 beam angle to illuminate rooms & corridors as efficiently as possible. The TP (a) rated diffuser is anti-glare with a UGR ...

The new Phoebe LED Galanos Arteson 600mm x 600mm backlit LED panel lights are a direct replacement for fluorescent modular fittings, which are commonly found in offices, schools & other workplaces. This 38W LED panel light emits 3800 lumens of warm white light (3000K), with a wide 110 beam angle to illuminate rooms & corridors as efficiently as possible. The TP (a) rated diffuser is anti-glare with a UGR ...