Phoebe LED Manto 2 1200mm Standard Integrated SMD IP65 Batten 2000lm Emergency This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 is integrated LED strip removing the need for bulb replacement. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which save an incredible amount of time, especially with projects requiring multiple fittings to be installed, as those terminals make it possible to wire directly from fitting-to-fitting. Present here is an emergency version which provides light in the case of a power cut for at least 3 hours. The supplied battery takes 16 hours to fully charge & the attached green light indicates when the battery is charged. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 2000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. The Manto 2 is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length Emergency mode Discharge ≥ 3hours Loop-through continuous live feed IP65 rated
- suitable for outdoor use IK07 impact rating 2000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Photius Integrated CCT Linear Batten 4ft Standard 40W Adjustable colour temperature in this integrated LED batten is possible thanks to CCT technology. You can choose between daylight, cool & warm white light. This lamp has a superb design & height of just 36mm, making it a perfect lighting solution for modern offices & contemporary commercial spaces. This fantastic lamp features anodized aluminium construction to produce a decorative, robust, non-corrosive body (IP42) with a polycarbonate diffuser at the same time being extremely efficient, producing 120lm/W. The installation process is simplified thanks to a 3-way terminal block. The lamp is suitable for suspension (FREE up to 1m long suspension wires included) or surface mounting. Features 40W 4-foot length 35, 000 hour life 100, 000 switching cycles 3000K/4000K/6000K tri-colour select High efficiency 120lm/W Colour rendering index ≥80 IP42 rated
- for indoor use only Not suitable for dimming 5 year warranty Dimensions: Width = 80mm, Height = 36mm, Length = 1190mm
...

Phoebe LED Photius Integrated CCT Linear Batten 4ft Standard 40W Adjustable colour temperature in this integrated LED batten is possible thanks to CCT technology. You can choose between daylight, cool & warm white light. This lamp has a superb design & height of just 36mm, making it a perfect lighting solution for modern offices & contemporary commercial spaces. A special feature of this Photius Integrated CCT Emergency is built-in emergency pack with 3-hour emergency battery & test function. ...

Phoebe LED Photius Integrated CCT Microwave Sensor Linear Batten 4ft Standard 40W Adjustable colour temperature in this integrated LED batten is possible thanks to CCT technology. You can choose between daylight, cool & warm white light. This lamp has a superb design & height of just 36mm, making it a perfect lighting solution for modern offices & contemporary commercial spaces. Special feature of this Photius Integrated CCT is the Microwave Sensor with easy access module for quick adjustment to sensor settings. This model allows users to set detection range (max 6m) & time (5secs
- 10min hold time) the light stays on after detecting a movement. When the sensor is not triggered light output dims to 20% of its full light output capability. This option saves an incredible amount of energy, which helps reduce lighting costs. Furthermore, this fantastic lamp features anodized aluminium construction to produce a decorative, robust, non-corrosive body (IP42) with a polycarbonate diffuser at the same time being extremely efficient, producing 120lm/W. The installation process is simplified thanks to a 3-way terminal block. The lamp is suitable for suspension (FREE up to 1m long suspension wires included) or surface mounting. Features Microwave Sensor 120° detection angle 6m Max Detection Range 5secs – 10min Hold Time 40W 4-foot length 35, 000 hour life 100, 000 switching cycles 3000K/4000K/6000K tri-colour select High efficiency 120lm/W Colour rendering index ≥80 IP42 rated
- for indoor use only Not suitable for dimming 5 year warranty Dimensions: Width = 80mm, Height = 36mm, Length = 1190mm

...

Phoebe LED Manto IP65 Non-Corrosive 4ft Fitting This durable IP65 rated fitting with anti-vandal stainless steel clips provide extra security from potential damage. Designed to work with Crompton Lamps LED T8 tubes only. Perfect for use in an industrial, garage, workshop & food preparation applications. Thanks to its high IP rating it's suitable for outdoor use & in conjunction with IK10 impact rating this fitting is a great solution for industrial areas where there is a need for extra resilience from the fittings. Manto fitting is suitable for a surface, conduit, & suspension mounting. Compatible LED T8 Tubes: Warm White-LFT422WW, Cool White-LFT422CW, Daylight-LFT422DL. Features 4-foot length IP65 rated
- suitable for outdoor use IK10 impact rating Fused terminal block for safety Moisture & acid resistant ABS body Polycarbonate diffuser Stainless steel clips Non-corrosive Suitable for conduit, surface or suspension mounting 5 year warranty
...

This versatile light bulb is a LED strip light 5 metre strip kit has a self-adhesive backing, allowing it to be attached to almost any surface, indoors or outdoors. Its white light makes it perfect for a range of uses, such as under cabinet lighting, backlighting (around your television, for example), & anywhere else around the home that ambient lighting is needed. The LED strip can be cut at 10cm intervals & reconnected using the kit provided, making it easy to install in almost any location, & its IP65 rating means it is protected in wet conditions (although it should not be fully immersed in water)
- the driver is only IP20 & must be enclosed in a suitable IP65 box if used outside. LED technology means that the strip light is highly energy efficient & has a long 20, 000 hour life. The Phoebe LED flexible strip light has 30 LEDs per metre, which means 150 LEDs in total. This kit

Includes:: everything you need to install the strip lights: 5m LED flexible white strip light, 1x 30W power adapter, 1x power lead with UK plug, 2x 10cm flexible joints.
Includes: everything needed to install the strip lights. Adhesive backing tape. LED strip can be cut to desired length. 30 LEDs per metre. Instant full light.240V 30W (LED Strip Kit No
- Not Suitable for Dimming 3500K White colour 1800 lumens




...

The Lykos 5ft high output integrated LED batten light with 3-hour emergency function has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 60W to provide 6000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 60W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation.A built-in emergency battery has a discharge time of at least 3 hours, making it ideal in scenarios such as power cuts or other low light scenarios. The supplied battery takes 16 hours to fully charge & has a handy green light indicator to show when the battery is charged. An integrated "self-test" button provides the ability to test the emergency mode. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

A pack of 5x Lykos 5ft integrated LED batten lights which have been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos single LED batten light comes with a 30W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The 5ft 30W Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...

The 5ft 60W high output Phoebe LED Oracle integrated LED batten features CCT technology which allows the colour temperature to be quickly & easily changed between 3000K warm white, 4000K cool white or 5700K daylight. Constructed from a robust steel construction, with an IK04 impact rating, the Oracle is designed to mimic the look of a traditional fluorescent batten & is ideal for offices, hotels, residential & commercial areas where reliability & quality of light are required. To assist in the ease of installation the fitting features flip-down end caps to access the CCT switch, plus a 3-way terminal block. Excellent light efficiency at 100lm/W. IP20 for indoor use. Not suitable for dimming. ...