This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.



...

This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.



...

A pack of 5x non-corrosive batten fittings which have been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.



...

Phoebe 1200mm 15W LED Link-Light Create gorgeous, seamless linear lighting effects with this intuitive range of LED link-lights from Phoebe LED. This 1200mm version is the longest in the range & has been designed to replace compact fluorescent batten fittings of a similar length & brightness. Each kit

Includes:: the link-light itself, along with a 100cm power lead that connects directly to the mains. Crucially, it also contains a 20cm connecting lead that means that you can connect a number of these lamps together, up to a length of 9 metres. This creates a seamless linear effect that looks great underneath long lines of kitchen cupboards and/or cabinets. Each pack
Includes:: 1 x LED Link-Light 1 x End Cap 1 x Power Lead (100cm) 2 x Installation Brackets


...

Phoebe 1200mm 15W LED Link-Light Create gorgeous, seamless linear lighting effects with this intuitive range of LED link-lights from Phoebe LED. This 1200mm version is the longest in the range & has been designed to replace compact fluorescent batten fittings of a similar length & brightness. Each kit

Includes:: the link-light itself, along with a 100cm power lead that connects directly to the mains. Crucially, it also contains a 20cm connecting lead that means that you can connect a number of these lamps together, up to a length of 9 metres. This creates a seamless linear effect that looks great underneath long lines of kitchen cupboards and/or cabinets. Each pack
Includes:: 1 x LED Link-Light 1 x End Cap 1 x Power Lead (100cm) 2 x Installation Brackets


...

Phoebe LED Mini Track Light 1m Track Silver Designed for use with the Phoebe LED Mini Track Light system. Pick your own lights, tracks & connectors, & start building your own track light system. See the full range of Mini Track Light components here. This 1-metre track is a sturdy steel & polycarbonate construction that can be cut to the desired length & combined with a range straight & corner connectors, allowing you to build a track light system to fit any space. Features 1-metre length silver track Steel & polycarbonate construction Can be cut to length ...

Phoebe LED Mini Track Light 1m Track White Designed for use with the Phoebe LED Mini Track Light system. Pick your own lights, tracks & connectors, & start building your own track light system. See the full range of Mini Track Light components here. This 1-metre track is a sturdy steel & polycarbonate construction that can be cut to the desired length & combined with a range straight & corner connectors, allowing you to build a track light system to fit any space. Features 1-metre length white track Steel & polycarbonate construction Can be cut to length ...

2-Way Connector (Left) for Phoebe LED Mini Link-Light The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This 2-way connector means that you can fit two Mini Link-Light sections together at a 90° angle, giving you more flexibility on where you fit your link-light system. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system 2-way 90° (left) male-male connector ...

2-Way Connector (Right) for Phoebe LED Mini Link-Light The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This 2-way connector means that you can fit two Mini Link-Light sections together at a 90° angle, giving you more flexibility on where you fit your link-light system. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system 2-way 90° (right) male-male connector ...

Phoebe LED 1000mm Mini Link-Light Warm White 3000K The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This link-light is 1000mm in length, & has an ultra-slim 8mm profile & modern metallic finish. It emits a cosy warm white 3000K light ideal for living rooms & hospitality areas. Its 975 total lumens can be dimmed using the touch-sensitive link-light dimmer switch (sold separately). It is very energy efficient, using only 15 watts, & has a long life of 40, 000 hours. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features 8mm ultra-slim profile LED light For use with other Mini Link-Light components 1000mm length 3000K warm white light 975 lumens Contents include 1x Mini Link-Light, 2x Mounting Brackets, 2x End Caps, 1x Clear Joint Average rated life of 40, 000 hours 20, 000 switching cycles Not suitable for outdoor use ...