Bezel to use with Phoebe LED Spectrum downlights. Change the appearance of your smart lighting in a matter of seconds thanks to magnetic bezels. Glossy black bezel adds a classy & sophisticated look to any room. Please note that the Phoebe LED Spectrum downlight app (available on Google Play for Android devices or the App Store for Apple devices) is required for initial setup the downlight. Bezel in glossy black colour Easy installation thanks to magnetic body 80 mm in diameter ...

Clear polycarbonate diffuser featuring a smooth exterior for an attractive finish. Provides excellent glare control & is easy to clean. For use with Phoebe LED 5ft Single Batten (part number: 5425) only. ...

Clear polycarbonate diffuser featuring a smooth exterior for an attractive finish. Provides excellent glare control & is easy to clean. ...

Clear polycarbonate diffuser featuring a smooth exterior for an attractive finish. Provides excellent glare control & is easy to clean. For use with Phoebe LED 6ft Single Batten (part number: 5426) only. ...

Clear polycarbonate diffuser featuring a smooth exterior for an attractive finish. Provides excellent glare control & is easy to clean. ...

This durable IP65 rated fitting with anti-vandal stainless steel clips provide extra security from potential damage. Designed to work with Crompton Lamps LED T8 tubes only. Perfect for use in an industrial, garage, workshop & food preparation applications. Thanks to its high IP rating it's suitable for outdoor use & in conjunction with IK10 impact rating this fitting is a great solution for industrial areas where there is a need for extra resilience from the fittings. Manto fitting is suitable for a surface, conduit, & suspension mounting. Compatible LED T8 Tubes: Warm White-LFT422WW, Cool White-LFT422CW, Daylight-LFT422DL.4-foot length IP65 rated
- suitable for outdoor use IK10 impact rating Fused terminal block for safety Moisture & acid resistant ABS body Polycarbonate diffuser Stainless steel clips Suitable for conduit, surface or suspension mounting 5 year warranty Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.


...

This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.

...

This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.

...

This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.



...

This non-corrosive batten fitting has been designed specifically for use with Crompton's range of T8 LED tubes The batten's anti-vandal design consists of a number of modular components that combine to ensure that the LED tubes it houses remain protected, both from the elements & the damaging effects of vandalism. The fitting's polycarbonate diffuser is attached to the bulb tray by a series of stainless steel clips that prevent it from being removed, & the tubes exposed. These clips are constructed from type 316 marine-grade' stainless steel; a famously rugged material with an excellent resistance to corrosion, even from salt water. The bulb tray itself is constructed from a powder coated ABS compound that protects the fitting as a whole & the tubes inside it from knocks & abrasions. It can be attached to any ceiling surface through a series of dedicated suspension eyelets that adorn the outer edge of the bulb tray. Attaching the batten to the ceiling with these (rather than drilling through the casing itself) guarantees a secure attachment that doesn't compromise the batten's integrity or IP65 rating. This robust design is well suited to a range of commercial/industrial applications, including public car parks, supermarkets, workshops & food preparation areas etc. It also removes the need for a compatible LED starter; all relevant control gear has been incorporated into the design of the batten, meaning all you need to do is wire the fitting into the mains & install the tube. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately. Important: this IP65 rated T8 batten fitting has been wired specifically for & tested solely with Crompton's range of T8 LED tubes. Installing any other type of tube
- either from Crompton or any other competitor
- can damage both the tube & the fitting itself, while also voiding the warranty of either product. Tubes sold separately.



...