Phoebe LED Manto 2 4ft Integrated Fitting IP65 2000lm This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 2000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5secs-30min hold time 2-2000lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 2000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra≥80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 5ft Integrated Fitting IP65 3000lm This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 3000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 5-foot length Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5secs-30min hold time 2-2000lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 3000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 4ft Integrated Fitting IP65 Batten 4000lm Microwave This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 4000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length 2-2000lux light sensitivity 5m-10m detection range 5secs-30min hold time 40W Microwave Sensor Loop-through continuous live feed IP65 rated
- suitable for outdoor use IK07 impact rating 4000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 5ft Integrated Fitting IP65 Batten 6000lm Microwave This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 6000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 5-foot length 60W Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5secs-30min hold time 2-2000lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 6000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra≥80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Motion Sensor Night Light Warm White This unique night light from Phoebe LED is perfect for when you need some low-level lighting, either to help children sleep or when you want to avoid switching brighter lights on during the night. It emits a cosy warm white light, soft enough so sleepy eyes won't be dazzled. An integrated motion sensor activates the night light for 30 seconds when it detects a presence. It will then switch off again when no presence is detected. The sensor has a 5 metre range, large enough for almost any room or hallway. The night light is battery operated, so no hard-wiring is required, & installation is easy. A strong built-in magnet means that you can fix the light to metal surfaces, or you can use the 3M adhesive tape provided to secure it in any other location. Its playful star design means it will look good left out on bedroom or hallway tables, providing a convenient, simple-to-use alternative to traditional household lamps. Please note, this light requires 3x AAA batteries to operate (not included). Features Can be mounted with adhesive strips or magnet Motion sensor detects movement up to 5m Requires 3 x AAA batteries (not included) 3000K warm white 30 second auto switch off Dusk till dawn 5 Year LED limited manufacturers warranty ...

Surface mounting kit for use with 1200x 300mm Phoebe LED Galanos Arteson ceiling panels. For use with part codes SL6265. ...

Surface mounting kit for use with 600x 600mm Phoebe LED Galanos Arteson ceiling panels. For use with part codes SL6262, SL6263, & SL6264. ...

This unique night light from Phoebe LED is perfect for when you need some low-level lighting, either to help children sleep or when you want to avoid switching brighter lights on during the night. It emits a cosy warm white light, soft enough so sleepy eyes won't be dazzled. An integrated motion sensor activates the night light for 30 seconds when it detects a presence. It will then switch off again when no presence is detected. The sensor has a 5 metre range, large enough for almost any room or hallway. The night light is battery operated, so no hard-wiring is required, & installation is easy. A strong built-in magnet means that you can fix the light to metal surfaces, or you can use the 3M adhesive tape provided to secure it in any other location. Its playful star design means it will look good left out on bedroom or hallway tables, providing a convenient, simple-to-use alternative to traditional household lamps. Please note, this light requires 3x AAA batteries to operate (not included). Can be mounted with adhesive strips or magnet Motion sensor detects movement up to 5m Requires 3 x AAA batteries (not included)3000K warm white 30 second auto switch off Dusk til dawn 5 Year LED limited manufacturer's warranty This product requires 3 x AAA batteries (not included). ...

Phoebe LED Mini Link-Light Touch Sensitive On/ Off Switch The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This sleek touch-sensitive on/off switch has a stylish aluminium-effect finish, & will blend right in with the rest of your Phoebe LED Mini Link-Light system. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Touch sensitive on/off switch Suitable for use only with the Phoebe LED Mini Link-Light system Aluminium-effect finish 18mm x 8mm x 67mm ...

Solar LED 3.2W Wall Light With Auto Sensor
- Silver This solar powered LED surface mountable outdoor light with PIR sensor is the
...