Replace your outdated fluorescent panels with this energy efficient, long lasting 36W LED panel. The Galanos Athena panel emits an outstanding 90 lumens-per-watt, offering the same brightness as a fluorescent panel, but using only a fraction of the power. Thanks to its 30, 000-hour life, once the panel is installed, it will be years before it needs replacing again. Its robust yet lightweight aluminium construction offers excellent durability. The panel is designed to retrofit to existing 600mm x 600mm fittings, which means it is easy to install & avoids the expense of changing lighting fixtures. Its bright 3330 lm cool white light & wide 120 beam angle make it ideal for general lighting in commercial environments & busy work areas.4000K
- Cool White Highly energy efficient
- 90lm/WInstant full light 3330 lumens 120 beam angle Lightweight aluminium frame with polycarbonate diffuser IP20 rated for indoor use 600mm x 600mm x 10mm Instant full light 30, 000 hour life

...

Replace your outdated fluorescent panels with this energy efficient, long lasting 36W LED panel. The Galanos Athena panel emits an outstanding 90 lumens-per-watt, offering the same brightness as a fluorescent panel, but using only a fraction of the power. Thanks to its 30, 000-hour life, once the panel is installed, it will be years before it needs replacing again. Its robust yet lightweight aluminium construction offers excellent durability. The panel is designed to retrofit to existing 600mm x 600mm fittings, which means it is easy to install & avoids the expense of changing lighting fixtures. Its bright 3390lm daylight light & wide 120 beam angle make it ideal for general lighting in commercial environments & busy work areas.6000K
- Daylight Highly energy efficient
- 90lm/WInstant full light 3390 lumens 120 beam angle Lightweight aluminium frame with polycarbonate diffuser IP20 rated for indoor use 600mm x 600mm x 10mm Instant full light 30, 000 hour life

...

Replace your outdated fluorescent panels with this pack of 5x energy efficient, long lasting 36W LED panels. The Galanos Athena panel emits an outstanding 90 lumens-per-watt, offering the same brightness as a fluorescent panel, but using only a fraction of the power. Thanks to its 30, 000-hour life, once the panel is installed, it will be years before it needs replacing again. Its robust yet lightweight aluminium construction offers excellent durability. The panel is designed to retrofit to existing 600mm x 600mm fittings, which means it is easy to install & avoids the expense of changing lighting fixtures. Its bright 3250lm warm white light & wide 120 beam angle make it ideal for general lighting in commercial environments & busy work areas.3000K
- Warm White Highly energy efficient
- 90lm/WInstant full light 3250 lumens 120 beam angle Lightweight aluminium frame with polycarbonate diffuser IP20 rated for indoor use 600mm x 600mm x 10mm Instant full light 30, 000 hour life

...

Replace your outdated fluorescent panels with this energy efficient, long lasting 36W LED panel. The Galanos Athena panel emits an outstanding 90 lumens-per-watt, offering the same brightness as a fluorescent panel, but using only a fraction of the power. Thanks to its 30, 000-hour life, once the panel is installed, it will be years before it needs replacing again. Its robust yet lightweight aluminium construction offers excellent durability. The panel is designed to retrofit to existing 600mm x 600mm fittings, which means it is easy to install & avoids the expense of changing lighting fixtures. Its bright 3250lm warm white light & wide 120 beam angle make it ideal for general lighting in commercial environments & busy work areas.3000K
- Warm White Highly energy efficient
- 90lm/WInstant full light 3250 lumens 120 beam angle Lightweight aluminium frame with polycarbonate diffuser IP20 rated for indoor use 600mm x 600mm x 10mm Instant full light 30, 000 hour life

...

The Lykos 4ft integrated LED batten light has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 20w to provide 2000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos single LED batten light comes with a 20W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently lowering costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 4ft high output integrated LED batten light has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 40W to provide 4000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 40W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 5ft integrated LED batten light has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos single LED batten light comes with a 30W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 5ft integrated LED batten light with 3-hour emergency function has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos single LED batten light comes with a 30W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation.A built-in emergency battery has a discharge time of at least 3 hours, making it ideal in scenarios such as power cuts or other low light scenarios. The supplied battery takes 16 hours to fully charge & has a handy green light indicator to show when the battery is charged. An integrated "self-test" button provides the ability to test the emergency mode. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 5ft high output integrated LED batten light has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 60W to provide 6000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 60W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 6ft high output integrated LED batten light has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 80W to provide 8000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 80W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...