This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which save an incredible amount of time, especially with projects requiring multiple fittings to be installed, as those terminals make it possible to wire directly from fitting-to-fitting. Present here an emergency mode provides light in the case of a power cut for at least 3 hours. The supplied battery takes 16 hours to fully charge & the attached green light indicates when the battery is charged. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 6000 lumens of cool white 4000K light with a wide 120 beam angle, perfect for busy work areas. The Manto 2 is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location.5-foot length Emergency mode Loop-through continuous live feed IP65 rated
- suitable for outdoor use IK07 impact rating 6000 lumens 100, 000 switching cycles 120 beam angle 50, 000 hours life Polycarbonate construction Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra 80 Not suitable for dimming 5 year LED limited warranty
...

This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 6000 lumens of cool white 4000K light with a wide 120 beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location.5-foot length Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5 secs-30 min hold time 2-2000 lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 6000 lumens 100, 000 switching cycles 120 beam angle 50, 000 hours life Polycarbonate construction Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 5ft High Output Integrated SMD IP65 Batten 6000lm This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which save an incredible amount of time, especially with projects requiring multiple fittings to be installed, as those terminals make it possible to wire directly from fitting-to-fitting. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 6000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. The Manto 2 is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 5-foot length IP65 rated
- suitable for outdoor use Loop-through continuous live feed IK07 impact rating 6000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 5ft High Output Integrated SMD IP65 Batten 6000lm Emergency This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which save an incredible amount of time, especially with projects requiring multiple fittings to be installed, as those terminals make it possible to wire directly from fitting-to-fitting. Present here an emergency mode provides light in the case of a power cut for at least 3 hours. The supplied battery takes 16 hours to fully charge & the attached green light indicates when the battery is charged. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 6000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. The Manto 2 is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 5-foot length Emergency mode Loop-through continuous live feed IP65 rated
- suitable for outdoor use IK07 impact rating 6000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 40W 4ft Integrated LED Batten This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The batten is constructed from tough polycarbonate & has an IK06 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 3800 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. The Manto is suitable for surface, conduit, & suspension mounting, & its long 30, 000 hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length IP65 rated
- suitable for outdoor use 3800 lumens 30, 000 hours life Polycarbonate construction, IK06 impact rating Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra≥80 Not suitable for dimming
...

Phoebe LED Manto 55W 5ft Integrated LED Batten with Emergency Kit This durable, energy efficient LED batten from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The batten is constructed from tough polycarbonate & has an IK06 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 5200 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. The Manto is suitable for surface, conduit, & suspension mounting, & its long 30, 000 hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. This batten features an integrated emergency battery that allows the light to operate without mains power for up to three hours. The battery has a charging time of 16 hours. Features 5-foot length IP65 rated
- suitable for outdoor use 5200 lumens 30, 000 hours life Integrated emergency battery operates for 3 hours Battery takes 16 hours to fully charge Polycarbonate construction, IK06 impact rating Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra≥80 Not suitable for dimming
...

Phoebe LED IP65 10W Rechargeable Carry Light The Phoebe LED IP65 10W Rechargeable Carry Light is a fantastic choice for those who require easily portable lighting. It's sturdy aluminium & iron construction makes it robust & suitable for various work environments & also provides a useful option for the home in areas such as lofts or cellars where mains light may not be available. When switched on it provides an instant 6000K daylight colour. Being IP65 rated makes it suitable for use outdoors as well as indoors. It has both low 400lm & high 800lm settings & can run from either mains or battery with up to 8 hours of operation from a single charge. It has an impressive 40, 000 hours life span &

Includes:: 12V car & 240V mains chargers Is supplied with a soft carry case. Features Up to 8 hours operation when fully charged Runs from mains or battery IP65 for use outdoors 40, 000 hour life

Includes:: 12V car & 24V mains chargers Sturdy aluminium & iron construction 6000K daylight colour -25°C to 50°C ambient temperature Supplied with soft carry case IP65 Rating Low 400lm & high 800lm settings



...

Phoebe LED 20W Portable Work Light. Compact rechargeable LED work light. Ideal for professional tradesmen, mechanics & DIY enthusiasts a like. Its perfect for use around the home, workshop, worksite, or garage. This powerful high performance portable floodlight can light up any space indoors or out. Perfect for emergency use or even to take with you on camping / fishing trips. It's crisp 6000k colour output also makes it suitable as an alternative light source for photographers. High impact & shatter resistant design This work light is suitable for outdoor use thanks to its IP65 rated, robust die-cast aluminium casing with a durable powder-coated finish. This work light also

Includes:: a sealed, weather protected on/off switch. Energy saving LED uses less power than traditional work lights The energy saving LED uses less power & therefore costs less to use & lasts longer than a traditional halogen work light. As a result the Phoebe portable LED work light also produces less heat than traditional work lights making it perfect for working comfortably in confined spaces. Features Can be powered / recharged by mains charger or 12v DC in car charger (Both included) Provides up to 4 hours continuous product use from a single charge. (Charging time:5-6 hours) Complete with soft-grip handle & a sturdy, fully adjustable stand that can be rotated to any angle. Produces 1600 lumens which is equivalent to a 100w Halogen floodlight. Cool operating temperature for comfort & safety. Pack

Includes:: In-car charger & mains adaptor. Weight: 2.7kg Dimensions: 215x 285x 185mm Optional Magnetic feet kit, also available.



...

Make products sparkle with this innovative rotating light fitting. 15 extra cool white LED bulbs & 3 RGB bulbs slowly rotate to bring jewellery, crystal & other reflective products to life. The RGB bulbs embedded within the white spotlights intensify colour refractions to make products look better than ever. An impressive CRi 90 rating provides excellent colour reproduction, emphasising shine & sparkle even further. The spotlights emit a bright 1860 lumens of crisp 5000K white light, with a 20 beam angle. The fitting is constructed from durable die-cast aluminium, with a modern silver finish. Please note, this light is not suitable for dimming, & needs to be fitted with a 24V constant voltage driver. Please see the manufacturer's website for more details.18W rotating spotlight Features 18 bulbs, 15 white & 3 RGB5000K extra cool white 1860 lumens Superior CRi 90 rating 20, 000 hour average rated life
Includes: a 50cm power lead Instant full light Not suitable for dimming Dimensions: Diameter Ø 160mm
- Height 93.5mm
- Cut-out Ø 145mm IP20 rated for indoor use only Requires a 24V constant voltage driver Requires a 24V constant voltage driver.


...

2-Way L-Shaped Connector for Phoebe LED Mini Link-Light The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This 2-way connector means that you can fit two Mini Link-Light sections together at a 90° angle on a vertical axis, giving you more flexibility on where you fit your link-light system. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system 2-way 90° male-male connector ...