More From Contributor

£4.17
Intended for use in an array of domestic & commercial settings, this MR11 spotlight from Integral LED employs four SMD LED units & an anti-glare refractor to produce a light akin to 35W halogen bulbs, but consume just 3.5W of power. Alongside its incredible efficiency, this lamp is also designed to manage heat more effectively than other spotlights, with a die-cast aluminium & plastic composite body dissipating heat away from its essential components much more effectively. This results in a bulb that lasts far longer than its halogen forebears, whilst also consuming a fraction of the power.
Features: Power consumption of 3.5W (Equivalent to 35W).280 lumens 25, 000 hour lifespan 4 Year manufacturer's warranty 4000K
- Cool White Crompton 12V LED MR11 lamps will operate with most AC or DC 12V transformers. However, some 12V transformers may have a minimum required load which may not be met when installing low powered LEDs. These transformers may cause flickering or the LEDs not to function correctly.

...
Archived Product
£4.17
This LED MR11 spotlight (GU4) light bulb has an impressive A+ energy rating. Consumes only 3.5w of electricity per spotlight & produces 260 lumens, which is equivalent to the brightness of a 35W halogen light bulb. Non-dimmable. 35 Beam angle Creates a bright, focused beam of light that can be used anywhere. This spotlight lamp is fitted with a low voltage 12V GU4 2-pin (4mm apart) base.12V 3.5W (35W equivalent) LED MR11 Spotlight GU4 cap No
- Not Suitable for Dimming 2700K Warm White colour 260 lumens
...
Available
£45.30
A value pack of 10 low voltage replacement LED MR16 spot light bulbs from Crompton Lamps sports a full glass body & Chip On ...
Available
£4.77
Intended as a direct replacement for old-fashioned halogen bulbs, this low voltage glass LED MR16 from Crompton Lamps has been designed to retrofit to your existing installations whilst consuming a fractional amount of power compared to the bulbs that currently occupy them. Using just 5W but producing a quality of light comparable to 35W halogen bulbs, this LED version boasts far superior longevity. Despite the modern technology that sits under the bonnet, the bulb retains the cosmetics of its halogen counterparts with a glass body that offers a traditional, familiar aesthetic. Should you wish to use this bulb in different settings
- from recessed kitchen ceiling installations to humid bathroom environments
- its universal shape & cap type make it suitable for use with any of our range of MR16 Downlight Fittings Note: low voltage MR16 bulbs require a compatible driver/transformer that will step down the mains voltage to 12v in order for them to work properly. Please note that this light bulb will operate with most AC & DC 12V transformers. However, some 12V transformers may have a minimum required load which may not be met when installing low powered LEDs: these drivers may cause flickering or the LEDs not to function correctly. If this issue arises it may be necessary to source a suitable LED driver. Please refer to the manufacturers website for compatibility.

...
Available
£23.15
A value pack of 5 low voltage replacement LED MR16 spot light bulbs from Crompton Lamps sports a full glass body & Chip On ...
Available
£4.77
Intended as a direct replacement for old-fashioned halogen bulbs, this low voltage glass LED MR16 from Crompton Lamps has been designed to retrofit to your existing installations whilst consuming a fractional amount of power compared to the bulbs that currently occupy them. Using just 5W but producing a quality of light comparable to 35W halogen bulbs, this LED version boasts far superior longevity. Despite the modern technology that sits under the bonnet, the bulb retains the cosmetics of its halogen counterparts with a glass body that offers a traditional, familiar aesthetic. Should you wish to use this bulb in different settings
- from recessed kitchen ceiling installations to humid bathroom environments
- its universal shape & cap type make it suitable for use with any of our range of MR16 Downlight Fittings Note: low voltage MR16 bulbs require a compatible driver/transformer that will step down the mains voltage to 12v in order for them to work properly. Please note that this light bulb will operate with most AC & DC 12V transformers. However, some 12V transformers may have a minimum required load which may not be met when installing low powered LEDs: these drivers may cause flickering or the LEDs not to function correctly. If this issue arises it may be necessary to source a suitable LED driver. Please refer to the manufacturers website for compatibility.

...
Available
£23.15
A value pack of 5 replacement low voltage LED MR16 spotlight bulbs from Crompton Lamps sports a full glass body & Chip On Board ...
Available
£8.97
This LED PAR30 reflector LED shares the same toughened glass body & prismatic lens as the 10W halogen light bulbs it's designed to replace, even though it only requires 10W to produce the same brightness & quality of light. Features a ES-E27 Edison screw (27mm) base/cap. The light bulb's body is constructed from a toughened glass shell that protects all of the electronics & internal components from light knocks & abrasions. The light bulb itself is IP65 rated which makes it absolutely ideal for a range of domestic & commercial applications both inside & out. The prismatic design of the light bulb's lens ensures that light output is distributed evenly within a 45 beam angle. Glare is kept to a minimum, while focus & intensity are increased for cleaner, more effective results. The familiar aesthetics & comparable light output of this PAR30 LED light bulb make it an ideal, albeit far superior replacement for your power hungry halogen reflectors. It uses a fraction of the energy & lasts upwards of 15, 000 hours, which is a huge improvement on the 1, 000 hour rating of these older light bulbs. Such a marked improvement in longevity & efficiency can ultimately reduce your lighting bill by up to 90%
- all from a light bulb that looks no different to your old ones.240V 10W (100W equivalent) LED PAR30 Reflector ES-E28 cap Yes
- Dimmable 3000K Warm White colour 800 lumens

...
Available
£9.07
This dimmable LED PAR30 reflector LED shares the same toughened glass body & prismatic lens as the 100W halogen light bulbs it's designed to replace, even though it only requires 9.5W to produce the same brightness & quality of light. Features a ES-E27 Edison screw (27mm) base/cap. The light bulb's body is constructed from a toughened glass shell that protects all of the electronics & internal components from light knocks & abrasions. The light bulb itself is IP65 rated which makes it absolutely ideal for a range of domestic & commercial applications both inside & outside (when installed in a suitably IP65 rated fitting). The prismatic design of the light bulb's lens ensures that light output is distributed evenly within a 30 beam angle. Glare is kept to a minimum, while focus & intensity are increased for cleaner, more effective results. The familiar aesthetics & comparable light output of this PAR30 LED light bulb make it an ideal, albeit far superior replacement for your power hungry halogen reflectors. It uses a fraction of the energy & lasts upwards of 25, 000 hours, which is a huge improvement on the 1, 000 hour rating of these older light bulbs. Such a marked improvement in longevity & efficiency can ultimately reduce your lighting bill by up to 90%
- all from a light bulb that looks no different to your traditional PAR30 spotlight bulb. Compatible with both leading & trailing edge dimmers*.* This LED PAR30 reflector light bulb is compatible with most dimmer switches, but please refer to the manufacturers website for an up-to date list of compatible dimmer switches.
...
Available
£7.89
This PAR38 LED reflector sports the same toughened glass body, Edison Screw fitment & prismatic lens as the 110W incandescent bulbs it's designed to replace. Despite a familiar
- even traditional
- exterior, its LED innards are anything but Despite a familiar
- even traditional
- exterior, its LED innards are anything but. Though it produces the same bright, quality light as a 110W filament bulb, this LED reflector uses just 13W. Light is funnelled through the bulb's prismatic lens which produces a beam angle of 30 & guarantees even, powerful light distribution.PAR38 reflectors are a popular choice for outdoor fixtures, particularly those that highlight specific garden features. As such, this bulb carries an IP65 rating that equips it for use in an array of suitable outdoor fittings. It is also rated to last an impressive 15, 000 hours, taking it well beyond the 2, 000 hour rated lifetime of comparable incandescent bulbs. This, coupled with the bulb's minimal energy consumption, can result in an eventual energy saving of up to 90%.



...
Available

Crompton MR16 Spotlight LED Bulb GU5.3 5W (35W Eqv) Warm White 10-Pack
40°

A value pack of 10 replacement low voltage LED MR16 spotlight bulbs from Crompton Lamps sports a full glass body and Chip On Board LED technology, allowing it to simultaneously resemble a halogen spotlight while using a fraction of the energy.Where a halogen MR16 might use 35W to produce 350lm, this LED replacement uses just 5W but emits the same bright, warm white light.It pushes directly into existing GU5.3 bases without any additional rewiring required, making it the perfect retrofit replacement for your halogen MR16 spotlights. Unlike other LED replacement light bulbs of the same class, it also shares the same physical characteristics as its halogen equivalent thanks to a full glass body and COB lens.This ultimately makes the process of replacing your halogen light bulbs as
seamless as possible, with shared aesthetics making it virtually impossible to tell the two light bulbs apart and the only noticeable difference being in your substantially reduced lighting bill.This spotlight lamp is fitted with a low voltage 12V GU5.3 2-pin (5.33mm apart) base.Pack of 10 12V 5W (35W equivalent) LED MR16 SpotlightGU5.3 capNo - Not Suitable for Dimming2700K Warm White colour350 lumensPlease note that these light bulbs will operate with most AC and DC 12V transformers. However, some 12V transformers may have a minimum required load which may not be met when installing low powered LEDs: these drivers may cause flickering or the LEDs not to function correctly. If this issue arises it may be necessary to source a suitable LED driver. Please refer to the manufacturers website
for compatibility.
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    • Availability: In Stock
    • Supplier: Simply LED
    • SKU: 1164
    Availability: In Stock
    £45.30

    Product Description

    A value pack of 10 replacement low voltage LED MR16 spotlight bulbs from Crompton Lamps sports a full glass body & Chip On Board LED technology, allowing it to simultaneously resemble a halogen spotlight while using a fraction of the energy. Where a halogen MR16 might use 35W to produce 350lm, this LED replacement uses just 5W but emits the same bright, warm white light. It pushes directly into existing GU5.3 bases without any additional rewiring required, making it the perfect retrofit replacement for your halogen MR16 spotlights. Unlike other LED replacement light bulbs of the same class, it also shares the same physical characteristics as its halogen equivalent thanks to a full glass body & COB lens. This ultimately makes the process of replacing your halogen light bulbs as seamless as possible, with shared aesthetics making it virtually impossible to tell the two light bulbs apart & the only noticeable difference being in your substantially reduced lighting bill. This spotlight lamp is fitted with a low voltage 12V GU5.3 2-pin (5.33mm apart) base. Pack of 10 12V 5W (35W equivalent) LED MR16 Spotlight GU5.3 cap No
    - Not Suitable for Dimming 2700K Warm White colour 350 lumens Please note that these light bulbs will operate with most AC & DC 12V transformers. However, some 12V transformers may have a minimum required load which may not be met when installing low powered LEDs: these drivers may cause flickering or the LEDs not to function correctly. If this issue arises it may be necessary to source a suitable LED driver. Please refer to the manufacturers website for compatibility.

    Reviews/Comments

    Add New

    Price History

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    LED - Light Emitting Diode - a small light source
    DC - Direct Current
    AC - Alternating Current
    LENS - An optical element which converges or diverges light
    White - A colour combining all colours
    Halogen - A chemical element often used in lighting
    Glass - A solid, typically transparent. Brittle and used in windows. The first patent granted in the UK was for Glass.
    Physical - Used to describe strength or visual properties of an item
    LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
    Voltage - A measurement of volts.

    Supplier Information

    Simply LED
    Illuminate your world with Simply LED (http://www.simplyled.co.uk/). Explore an extensive range of energy-efficient LED lighting solutions for homes and businesses. From bulbs and spotlights to fixtures and accessories, Simply LED offers quality products at affordable prices. With a commitment to sustainability and innovation, brighten up your space while reducing energy consumption. Trust Simply LED to light up your life with efficiency and style.
    Page Updated: 2024-02-27 13:52:32

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu