The R2 White Mid-Tower from Zalman is an inexpensive but superbly designed PC case Part of the R series it

Includes::

...

The ingeniously designed S2 Midi-Tower from Zalman makes for an affordable case in the new S-series & offers a large acrylic glass side panel An attractive grid-style front panel

Includes:: a dust filter & the pre-installed 120 mm fan ensures optimal airflow within the case Additional removable dust filters are available in the roof & in the bottom of the case Last but not least the PSU shroud helps provide a tidy interior where there is plenty of space to install your hardware THE ZALMAN S2 MIDI-TOWER AT A GLANCEAttractive design with large tinted acrylic glass side panel 120 mm fan pre-installed Well-equipped IO panel with 2x USB (Universal Serial Bus) 20 &38; 1x 30 &38; Audio-In Out Up to two SSDs HDDs or a max of four SSDs Removable dust filter &38; cable management with airflow-optimised front panel Graphics cards up to 330 mm long &38; CPU coolers up to 156 mm tall Space for up to one 240 mm radiator or two 120 mm radiators THE FEATURES OF THE ZALMAN S2 CASE IN DETAILThe attractive exterior of the Zalman S2 is rounded out by the addition of some highly desirable consumer-friendly additions on the inside As such the case offers a clean look as well as a PSU shroud & plenty of space for cable management behind the motherboard tray Up to two 35 hard drives or two 25 SSDs which can be installed without needing tools are located in a HDD cage behind the power supply The reverse of the motherboard tray allows for two further SSDs Underneath the PSU shroud is space for a large PSU of up to 180 mm in length Six cut-outs are available to assist users in cable management There is a fan pre-installed in the back of the case Two further 120 mm fans can be installed on the top side of the PSU shroud & in the roof of the case along with three at the front of the case The front can hold a 240 mm radiator instead of fans if you prefer as well as a smaller 120 mm fan in the rear The bottom & the roof include removable dust filters & the stylish mesh-style front with its grid is also kitted out with a dust filter This case will certainly help to keep your expensive hardware in great condition The IO panel with a USB (Universal Serial Bus) 30 connector & two USB (Universal Serial Bus) 20 connections offers the basics & is located to the front of the roof Multiple long graphics cards up to 330 mm can fit in this premium case & would make the Z2 the perfect foundation for a high-end gaming system It also

Includes:: a large cut-out in the motherboard tray to allow users to install large CPU coolers that include a backplate making stable CPU cooler mounting a breeze
- the cooler itself can be up to 156 mm tall Technical Details Dimensions 189 x 451 x 412 mm (Wx Hx D) Material Steel plastic acrylic glass Weight approx 4kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal possible fans 3x 120 mm (Front)2x 120 mm (Roof)2x 120 mm (Top of PSU shroud)1x 120 mm (Rear) Pre-installed 1x 120 mm (Rear) Radiator Mountings 1x max 240 mm (Front)1x max 120 mm (Rear) Dust filter (removable) Front bottom front Drives 2x 3525 (internal)2x 25 (internal)PSU (optional) Standard ATXExpansion Slots 7IO Panel 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x Audio In Out Max GPU length 330 mm Max PSU length 180 mm Max CPU cooler height 156 mm




...

The Zalman S4 Plus is a budget friendly midi tower case with enough space for all your components Aesthetically the case is excellent with an acrylic glass side panel to display the components such as the two pre-installed 120mm RGB fans It has a solid construction in an eye-catching brushed aluminium THE ZALMAN S4 PLUS MIDI TOWER AT A GLANCESimple elegant design Tinted side panel made from acrylic glass Two pre-installed 120mm RGB fans Mesh front panel for optimal airflow Fully featured IO panel with 1x USB (Universal Serial Bus) 20 1x USB (Universal Serial Bus) 30 & audio jack Room for graphics cards up to 315mm long & CPU coolers up to 160mm in height Space for up to a 240mm radiator or two 120mm radiators THE ZALMAN S4 PLUS CASE IN DETAILThe Zalman S4 Plus's attractive exterior is complemented by clever details on the inside For instance a power supply shroud creates a neat & tidy look & can hold a power supply up to 180mm long There are also good options for cable management Cables can run behind the motherboard or through the six recesses In respect to cooling two 120mm RGB fan are pre-installed in the front & another one is on the back Two additional 120mm fans can be attached to the cover & above the PSU shroud If you prefer water cooling a 240-millimeter radiator can be attached to the front Removable dust filters on the base & top ensure good airflow which is enhanced by the mesh front panel There is space for up to two 35-inch hard drives or one 25-inch SSD in an HDD cage behind the power supply Another SSD can be installed behind the motherboard tray GPUs up to 315mm in length can be accommodated if no fan is fitted to the front Finally the IO panel is equipped with a USB (Universal Serial Bus) 30 & a USB (Universal Serial Bus) 20 port All in all then the Z4 the ideal foundation for a well-equipped gaming system SPECIFICATIONDimensions 206 x 458 x 400 mm (W x H x D) Material steel plastic acrylic glass Weight approx 37kg Colour black gray Form factor ATX Micro-ATX Mini-ITXTotal fans possible 3x 120 mm (front)2x 120 mm (lid)2x 120 mm (top of power supply cover)1x 120 mm (back) Pre-installed 2x 120 mm (front)1x 120 mm (back)radiator Mountings 1x max 240 mm (front)1x max 120 mm (back) Dust filter (removable) bottom lid Drive Bays 2x 35 25 inch (internal)1x 25 inch (internal) Power supply (optional) Standard ATXExpansion slots 7I O panel 1x USB (Universal Serial Bus) 301x USB (Universal Serial Bus) 201x per audio in out Maximum graphics card length 315 mm (without front fan) Maximum power supply length 180 mm Maximum height of CPU cooler 160 mm ...

With the S5 Zalman delivers a minimalist RGB mid tower with a clear design a tempered glass side panel two pre-installed fans a power supply shroud clever cable management & subtle RGB lighting FEATURESMinimalist mid-tower by Zalman in white Elegant front with subtle RGB lighting Tempered glass side panel Vertical mounting bracket for 240mm radiator Space for 2x 35 25-inch & 4x 25-inch drives Up to two 240 mm radiators Two pre-installed 120 mm fans (1 x RGB 1 x non RGB) Foldable cable duct for smart cable management Supports Graphics cards up to 340mm in length Zalman has given the S5 a side panel made from tempered glass The interior of the housing is completely black & due to the contrast contributes to the elegant overall picture of the S5 The case features a power supply shroud for power supplies up to 190mm in length & a modular drive cage for two 35 or 25 Hard Drive Solid State Drives Four additional 25 drives can be mounted on the back of the motherboard tray & on the power supply shroud The minimalist front offers subtle perforation & RGB lighting Two pre-installed 120mm fans an RGB fan in the rear of the chassis & a non-RGB fan in the front ensure good ventilation The front of the Zalman S5 can hold a total of up to three 120mm fans while there is space for up to two 120mm fans in the bottom & top of the chassis for additional cooling potential Processor coolers must not exceed a height of 163mm while graphics cards can be up to 340mm long As a special feature the Zalman S5 also offers options for installing water cooling; a vertical radiator bracket can accommodate two 120mm fans & one 240mm radiator Another 240 mm radiator can be placed in the cover of the housing The foldable cable duct on the back of the motherboard tray ensures tidy cable management throughout SPECIFICATIONSDimensions (W x H x D)
- 212 x 465 x 398mm Materials
- Steel Tempered Glass Plastic Weight
- 58kg Color
- White Black (Interior) Motherboard Form Factor
- ATX Micro-ATX Mini-ITXFan Support
- 3x 120mm (Front)1x 120mm (Rear)2x 120140mm (Top)2x 120mm (Bottom)2x 120mm (Vertical Bracket) Pre-Installed Fans
- 1x 120mm (front)1x 120mm (rear) Radiator Support
- 1x 240mm (Top)1x 240mm (Vertical Bracket) Drive Support
- 2x 35 25 (internal)4x 25 (internal) Power Supply Form Factor
- Standard ATXExpansion Slots
- 7IO panel
- 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x Audio In Out 1x LED Control Button 1x Power Button 1x Reset Button Maximum GPU Length
- 340mm Maximum PSU Length
- 190mm Maximum CPU Cooler Height
- 163mm














...

Zalman has once again succeeded in expanding its portfolio with a new stylish & unique case The T6 joins a line-up of distinctive enclosures thanks to its distinctive front which is reminiscent of a high-rise fa&231;ade & which not only looks chic
- it serves a purpose too Its permeability helps ensure the Zalman T6 achieves superb airflow It can be enhanced further by adding an optional fan to the left side of the case In recent years slots for external 525 drives have become somewhat of a rarity The Zalman T6 does include one where you of course have the option of installing either an optical drive or a controller THE FEATURES OF THE ZALMAN T6 MIDI-TOWER AT A GLANCEElegant Midi-Tower with unique front Supports motherboards up to ATX weighing just 282kg Four 120 mm fan slots in total one fan pre-installed in the back 2x 25- & 2x 3525 drives external bay for a 525 drive IO port with 1x USB (Universal Serial Bus) 30 2x USB (Universal Serial Bus) 20 1x Audio In 1x Audio Out Supports graphics cards up to 280 mm CPU coolers up to 165 mm tall PSUs up to 160 mm long WELL-VENTILATED &38; EXCELLENT AIRFLOWThe black T6 Midi-Tower impresses with its sleekly designed front panel Behind the distinctive vertical struts is a fine mesh which also doubles as a dust filter The two 120 mm fans can be installed behind it & they pull more than sufficient air through the front A 120 mm fan is already installed at the back Another fan can be attached to the left side panel The side panels have a geometric design that adds another flourish to the overall look of the case The surfaces are kept matte rather than glossy which helps minimise unwanted fingerprints as well Although the exterior is plastic it makes no compromises on looks & the interior of the case is black steel PLENTY OF SPACE FOR HARDWAREThe interior is spacious allowing for plenty space for drives There is also space for an external 525 drive which is designed for optical drives or fan controllers Two 35- or 25 drives will fit inside & two further 25 drives can fit on the bottom of the case or behind the motherboard tray The second 35 drive can be installed in place of the front-facing fans The roomy interior also offers chamfered edges to prevent injuries as well as space for graphics cards up to 280 mm in length along with seven expansion slots The max length of the GPU is reduced to 260 mm with the presence of an HDD in the front Furthermore there is a hole in the wall of the case to enable mounting CPU coolers up to 165 mm in height without having to remove the motherboard The IO panel is located to the front of the case's roof & offers a USB (Universal Serial Bus) 30 connection two USB (Universal Serial Bus) 20 ports as well as the standard audio jacks TECHNICAL DETAILSDimensions 200 x 430 x 377 mm (W x H x D) Material Steel (body) plastic (front roof) Weight approx 282kg Colour Black Form factor ATX Micro-ATX Mini-ITXFans 2x 120 mm (Front)1x 120 mm (Side)1x 120 mm (Rear) Pre-installed 1x 120 mm (Rear) Drive Bays 1x 525 (external)2x 2535 (internal)2x 25 (internal) Expansion slots 7IO Panel 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x Audio In Out Max GPU length 280 mm Max PSU length 160 mm Max CPU cooler height 165 mm
...

Zalman's X3 Mid-Towwer focuses on an appealing design with digitally addressable RGB lighting The cooling properties of the case are not compromised as numerous fans & large CPU coolers are supported The lighting of the four included case fans can be controlled using buttons on the front panel or through a compatible motherboard THE FEATURES OF THE ZALMAN X3 MID-TOWER AT A GLANCEStylish Mid-Tower in Black Slightly tinted tempered glass (20 percent) Front & side panels can be removed without tools Four supplied ARGB fans Suitable for up to six case fans Including ARGB controller for up to six fans & two RGB strips Supports GPUs up to 350mm long THE ZALMAN X3 IN DETAILThe Zalman X3 is designed for air cooling due to its compact

Dimensions but can also be equipped with full water cooling Three 120mm fans with digitally addressable RGB lighting are pre-installed at the factory Another fan of the same type is located in the rear of the chassis Two 120 or 140mm fans can be attached to the top Alternatively a 140mm fan can be attached to the rear chassis & two 140mm fans instead of the three 120mm fans on the front panel This allows a total of six 120mm or five 140mm fans to be installed into the X3 The Zalman X3 can accommodate 175mm high CPU coolers The integrated RGB controller enables the connection of up to six fans including a 3-pin RGB signal cable (5V) & the two RGB strips integrated in the cover A dedicated button on the front panel means that you can control the lighting effects Alternatively the controller can be connected to the 3-pin header of a compatible mainboard in order to control the digitally addressable RGB accessories via software ZALMAN X3 A HOME FOR POWERFUL HARDWARE COMPONENTSThe white motherboard tray of the Zalman X3 can accommodate small mini-ITX micro-ATX & regular ATX motherboards Graphics cards can be up to 350mm long A total of seven horizontal expansion slots are available There is space for an ATX power supply with a maximum length of 180mm under the power supply cover The Zalman X3 offers a factory installed drive cage for a 35-inch & a 35 25-inch drive & two 25-inch drive carriers that can fit on the power supply cover THE DESIGN OF THE ZALMAN X3 The wide ventilation slot in the front of the chassis is immediately noticeable It gives the Zalman X3 a classy-looking appearance & enables the ARGB fans behind the mesh with their luminous rings to pull air into the case with ease The left side panel is a large side window made from tempered glass This allows for a great view of the installed hardware & has been given a 20 percent tint The case is completely black with the motherboard tray & power supply cover in white setting a contrasting accent The power supply & its connection cables are skillfully hidden by the cover EXTENSIVE VARIETY OF CONNECTIONSThe I O panel of the Zalman X3 is equipped with two USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 ports In addition there are two 3.5cm jacks one of which functions as a headphone output & the other as a microphone input In addition to the power & reset buttons there is also a button for controlling the RGB lighting SPECIFICATIONDimensions 210 x 459 x 430 mm (W x H x D) Material Steel Plastic Tempered Glass Weight 91kg Colour Black Form Factor ATX Micro-ATX Mini-ITXTotal Fans Possible 3x 120 2x 140mm (front)2x 120 2x 140mm (top)1x 120 1x 140mm (back) Total Radiators Possible 1x 360 280mm (front)1x 120mm (rear)drive bays 1x 35 25 inch (internal HDD cage)1x 25 inch (internal HDD cage)2x 25 inch (internal single carrier) Power supply 1x standard ATX (optional) Expansion slots 7I O panel 2x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 202x 3.5cm jack (audio in out) Maximum CPU cooler height 175mm Maximum graphics card length 350mm Maximum power supply length 180mm

...

Zalman X-Series premium quality that exceeds expectations Front & Side Tool-Free designs High-Strength side panel for showing off components Specifications Technical details Number of 35 bays 3 Number of 25 bays 3 Supported motherboard form factors ATX micro ATX Mini-ITXSupported HDD sizes 2535 Side window Yes Reset button Yes Product colour White Number of expansion slots 7 Maximum CPU cooler height 175 cm Maximum graphics card length 35 cm Maximum PSU length 18 cm Type PCForm factor Midi Tower Material Material Steel Indication Illumination location Case fans Front Illumination colour Red Green Blue Illumination Yes Ergonomics Reset button Yes Cable management Yes Onoff button Yes Design Anti-dust filter Yes Material Steel Number of 35 bays 3 Number of 25 bays 3 Supported motherboard form factors ATX micro ATX Mini-ITXSide window Yes Reset button Yes Illumination location Case fans Front Illumination colour Red Green Blue Illumination Yes Cable management Yes Product colour White Number of expansion slots 7 Maximum CPU cooler height 175 cm Maximum graphics card length 35 cm Maximum PSU length 18 cm Type PCForm factor Midi Tower Onoff button Yes Tempered glass panel (s) Yes Power supply Power supply included No Ports & interfaces USB 32 Gen 1 (31 Gen 1) Type-A ports quantity 2 Audio input Yes Audio output Yes USB 20 ports quantity 2 Cooling Front radiator fan sizes supported 120240280360 mm Rear radiator fan sizes supported 120 mm Front fans installed 3x 120 mm Number of front fans supported (max)3 Front fans diameters supported 120140 mm Rear fans installed 1x 120 mm Number of rear fans supported (max)1 Rear fans diameters supported 120140 mm Number of top fans supported (max)2 Top fans diameters supported 120140 mm Liquid cooling capability Yes Storage HDDSSD combo cage Yes Supported HDD sizes 2535 Weight & dimensions Width 210 mm Depth 430 mm Height 459 mm Weight 91kg ...

The Z-Sync from Zalman is a combined hub & controller that serves as a practical control center for up to eight digitally addressable RGB LED products Thanks to conventional 3-pin connections (5VDG) it is compatible with almost all RGB LED strips or fans with the corresponding plug The highlight of the Z-Sync is that it also works on mainboards without RGB-LED slots To do this it is simply connected to a free USB (Universal Serial Bus) 20 slot The lighting is controlled using the Z-Sync software or even the Razer Chroma control The features of the Z-Sync controller hub from Zalman at a glance- RGB LED controller hub for digitally addressable LED products- Eight 3-pin connectors (5VDG)- Connection to a free USB (Universal Serial Bus) 20 port on the mainboard- Control of lighting via Z-Sync or Razer Chroma software- Easy assembly with double-sided adhesive tape The features of the Z-Sync controller hub from Zalman in detail The Z-Sync controller hubs from Zalman has eight channels to which digital addressable RGB LEDs can be connected RGB LED products with a total current of 4 amps can be connected in the 3-pin connectors In this way even more than eight RGB LED components can be connected using a distribution cable or daisy chaining The Z-Sync controller hubs from Zalmancan be easily installed thanks to the double-sided adhesive strips already attached With a height of only 12 millimeters the Z-Sync can also be attached to the back of a mainboard tray With its side

Dimensions of 79 x 49 millimeters it easily fits into a free 25-inch SSD slot The power supply is via SATA cable via the power supply To connect to the mainboard it must have a free USB (Universal Serial Bus) 20 header As soon as the controller is connected the RGBs are controlled via the Zalman-Z-Sync or Razer-Chroma software Technical details-

Dimensions 79 x 49 x 12 mm (W x H x D) Connections- Input USB (Universal Serial Bus) 20 (5-pin micro-USB via header on the mainboard)- Output 8x 3-pin RGB header (5VDG max 4 A)- Power supply 5 V (via SATA from the power supply) Contents- 1x Z-Sync controller hub- 1x USB (Universal Serial Bus) connection- Cable 1x power cable (SATA)- 1x splitter (3-pin 3x 3-pin)



...

Optimized Cooling Structure for Air Flow Strong cooling performance with low noise thanks to Zalman Cooling Solution Interactive Cooling System HDD bay emits the heated air on both sides & maximizes its cooling function that the Case can provide Maximum 8 system fans installable 5 basic standard fans 3 more fans can be installed on fronttopbottom vents Exclusive Cooling for Power Supply PSU located on the bottom for improvement of air flow & cooling performance Dual Radiator Water Cooler installable Spacious room for dual radiator water cooler installation Dynamic style design With brushed aluminum style frontal door & SFX styled top Air Vent gives off dynamic feel Transparent Acryl side Transparent Acryl side to show internal system One-touch Sliding ODD door One touch Sliding ODD door for simpler design Dust Filter Installed Dust filter applied on top& bottom Convenient Interface & USB (Universal Serial Bus) 30 support USB 30 on Frontal Part (Top) Audio Port Convenience enhanced by relocating power & reset button Tool Free HDDCan install & uninstall up to 8 HDD max without any additional tools High Performance Graphic Card High

Specification VGA card can be installed within 400mm size maximum Excellent Expandability & Spacing Up to 8 ODDHDDSSD 175mm tall CPU Cooler dual radiator water cooler can be installed Hole for replacing CPU cooler & organizing cables CPU Cooler installing hole on MB CPU part so that MB doesn’t need to be separated when replacing CPU cooler Also cable hole for organizing cables Anti-vibration & noise absorption Rubber pods applied on the bottom of the case & power supply to prevent slipping & noise PCI slot expandability Great expandability with 7 PCI slots Design Material Acrylic Aluminium Number of 525" bays 1 Number of 35" bays 6 Number of 25" bays 2 Number of internal 35" bays 6 Supported motherboard form factors ATX Micro-ATXSuitable for Gaming Side window Yes Number of internal 525" bays 1 Illumination location Front Side Top Illumination colour Blue Illumination Yes Built-in speaker (s) No Colour of product Black Number of expansion slots 7 Maximum CPU cooler height 175 cm Maximum graphics card length 40 cm Type PCForm factor Midi-Tower Technical details Number of 525" bays 1 Number of 35" bays 6 Number of 25" bays 2 Number of internal 35" bays 6 Supported motherboard form factors ATX Micro-ATXSuitable for Gaming Side window Yes Reset button Yes Number of internal 525" bays 1 Number of hard drives supported 8 Built-in speaker (s) No Colour of product Black Number of expansion slots 7 Maximum CPU cooler height 175 cm Maximum graphics card length 40 cm Type PCForm factor Midi-Tower Material Material Acrylic Aluminium Power supply Power supply included Yes Power supply location Bottom ATX power connector (20 4 pin) Yes Ports & interfaces USB 30 (31 Gen 1) Type-A ports quantity 2 Audio input Yes Audio output Yes USB 20 ports quantity 2 Cooling Front fans installed 1x 120 mm Maximum front fans 2 Front fans diameters supported 120 mm Side fans installed 2x 80 mm Maximum side fans 2 Side fans diameters supported 80 mm Rear fans installed 1x 120 mm Rear fans diameters supported 120 mm Maximum top fans 2 Top fans diameters supported 120140 mm Maximum bottom fans 1 Bottom fans diameters supported 120140 mm Storage Number of hard drives supported 8 Indication Illumination location Front Side Top Illumination colour Blue Illumination Yes Ergonomics Reset button Yes Packaging content Manual Yes Weight & dimensions Width 205 mm Depth 515 mm Height 465 mm Packaging data Manual Yes

...

The Z7 Neo from Zalman demonstrates once & for all that an affordable Midi-Tower does not need to cut corners Quite to the contrary the Z7 Neo manages to impress with its clean lines minimalist black interior & the contrast that the pre-installed RGB-LED fans achieve with the rest of the case Needless to say Zalman has also gone the extra mile in terms of craftsmanship THE FEATURES OF THE ZALMAN Z7 NEO MIDI-TOWER AT A GLANCEElegant Midi-Tower with font & side panel in tempered glass Six fan slots & space for radiators up to 360 mm Four 120 mm fans with RGB-LED lighting pre-installed 2x 35-25- & 2x 25 drives possible IO panel with 1x USB (Universal Serial Bus) 30 2x USB (Universal Serial Bus) 20 2x 3.5cm jack & RGB-LED controller Supports graphics cards up to 355 mm ZALMAN Z7 NEO MIDI-TOWER WITH TEMPERED GLASS & RGB-LED CONTROLLERZalman has given the Z7 Neo a stylish two-tone interior in black with a white motherboard tray In the lower section of the case there is a black shroud supporting PSUs up to 18 cm in length with a modular drive cage for two 35- or 25 drives Two additional 25 SSDs can be mounted to the rear of the motherboard tray The clean interior of the Midi-Tower is illuminated by means of four 120 mm RGB-LED fans They are equipped with white dispersion rings & controlled by an RGB-LED controller to the rear of the motherboard tray This is connected to a button on the IO panel & can be hooked up to a 4-pin RGB connector on compatible motherboards in order to colour coordinate your peripherals via software In total eight RGB-LED fans can be connected to the RGB-LED controller via proprietary 6-pin connectors as well as two RGB-LED strips with 4-pin connectors (12 V)VERSATILE COOLING OPTIONSThe Zalman Z7 Neo offers multiple options for installing watercooling there is space in the roof for a radiator up to 240 mm in size & the front supports a 360 mm radiator When using air cooling in addition to the four pre-installed 120 mm fans in the front & back two 140- or 120 mm fans can be installed in the roof CPU coolers are limited to a max height of 165 mm A large magnetic filter in the top protects your components from unwanted dust TECHNICAL DETAILSDimensions 213 x 460 x 420 mm (W x H x D) Material Steel tempered glass plastic Weight 72kg Colour Black (chassis) white (motherboard tray) Form factor ATX Micro-ATX Mini-ITXFans 3x 120 mm (Front)1x 120 mm (Rear)2x max 140120 mm (roof) Pre-installed fans 3x 120 mm (Front RGB-LED)1x 120 mm (Rear RGB-LED) Drives 2x 3525 (internal)2x 25 (internal)PSU (optional) Standard ATXExpansion slots 7IO Panel 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x Audio In Out Max GPU length 355 mm Max PSU length 180 mm Max CPU cooler height 165 mm ...