For 11551156775AM2AM2 AM3940939754 Sockets Powerful Cooling Performance Ultra Quiet 92mm Fluid Shield Bearing Fan PWM Fan Control Easy Installation Versatile Compatibility Brand Zalman Item Weight 322 g Product

Dimensions 127 x 64 x 134 cm Item model number CNPS5X PERFORMAThe ZALMAN CNPS5X Performa is a quiet yet powerful CPU cooler on a budget An ultra-quiet 92mm PWM fan with fluid shield bearing three heatpipes & aluminium fins combine to deliver efficient heat dissipation to keep your CPU cool Broad socket compatibility makes it suitable for almost all the mainstream motherboard platforms Box Contains Cooler Clip Support Pushpin Thermal Grease (ZM-STG2M) Manual

...

The Zalman CNPS80G consists of a heat sink the aluminum fins of which are arranged in a ring around an 85 mm PWM fan This arrangement also cools the surrounding mainboard components & the heat pipe integrated in the fin ring Thanks to its low height of only 52 mm the CNPS80G is particularly suitable for use in low-profile housings equipped which the noise level at max 253 d B (A) holds The CNPS80G CPU cooler at a glance- Compact CPU cooler from Zalman- Ultra-quiet 85 mm fan with PWM control- Flower-heat-sink construction for optimal air circulation- Low weight & low overall height for small housings- Easy installation with push pins- Compatible with Intel 115X sockets- TDP of 65 watts Compact & lightweight processor cooler with a quiet PWM fan The heat sink of the Zalman CNPS80G is made from aluminum & thanks to the flower-heat-sink design the fins are constructed in such a way that the heat is optimally distributed & effectively dissipate the heat absorbed by the aluminum core to the circulating air The processor cooler is designed for CPUs with a TDP of 65 watts In addition to the cooling capacity the focus was primarily on the volume With only 253 d B (A) at a maximum speed of 2000 rpm it is relatively quiet for its size The rotor blades of the 85 mm fan are designed in a shark fin design which optimizes the air flow & reduces vibrations & volume Included with the CNPS80 G Zalman thermal paste is included The CPU cooler is suitable for motherboards with the Intel socket 1200 1150 1151 1155 1156 The installation is very easy thanks to the push pins & can also be mastered quickly & safely by beginners thanks to the included instructions Technical details-

Dimensions approx 1237 x 614 x 102 mm (W x H x D)- Material aluminum (heat sink)- Weight 180 g- Fan 85 mm (max 253 db (A) 1000
- 2000 U min)- Connection 4-pin PWM- Voltage 12V DCCompatibility- Intel socket 1150 1151 1155 1156 Contents- CPU cooler- Thermal paste- User manual


...

The Zalman CNPS9X Optima offers a whopping 180 watts TDP despite its compact design In combination with the enclosed thermal grease ZM-STG2M this is sufficient even for the fastest Intel & AMD processors Thanks to the four copper heatpipes running through the base plate the heat quickly reaches the aluminum fins through which a direct-fitting quiet 120 mm fan with white LEDs removes the air The Zalman CNPS9X- Tower cooler with up to 180W TDP cooling capacity- Four U-shaped direct-touch copper heatpipes- 1x 120mm PWM fan with white LEDs- Easy installation- Including Zalman thermal grease- High compatibility with AMD & Intel Powerful tower cooler with white LEDs The Zalman CNPS9X Optima is a compact tower cooler with four copper U-shaped heatpipes These run through the bottom plate so that they touch the processor directly Thus the contact surface consists of both aluminum & copper The heat is transferred very quickly into the heatpipes & from there into the aluminum fins of the radiator The supplied 120 mm fan with white LEDs ensures a quick removal of heat Zalman equips it with a rifle bearing for a smoother ride & longer life The shark fin blades reduce vibration & increase airflow The 120er fan rotates at 600 to 1500 rpmproducing a very low noise level with a maximum volume of 26 db (A) at a delivery volume of 61 CFM

Specification-

Dimensions (with fans) 123 x 156 x 72 mm (W x H x D)- Weight (with fan) approx 594 g- Material copper (heatpipes) aluminum (base plate lamellas) plastic (fan)- Colour Silver Copper (Radiator) Black (Fan)- Heatpipes 4x made from copper- 1x 120 mm- max 26 d B (A)- 600
- 1500 rpm- 61 CFM- Connection 4-pin PWM- Operating voltage 12 V Compatibility- Intel Socket LGA 775 115x- AMD Socket AM3 () AM4 FM2 ()




...

The i 3 series of cases from Zalman represents as Intel's namesake CPU series a robust addition to the entry-level world of quality PC cases A large side window PSU shroud & four pre-installed fans with LED lighting make up some of the defining features of the i 3 series in addition the Midi-Tower offers plenty of space for high-performance graphics cards installation options available include dual-rad water cooling & the case is also designed to assist with concealing unsightly cabling The black exterior comes with a dark tinted acrylic glass side panel that accentuates the user's choice of lighting THE ZALMAN I3 MIDI-TOWER AT A GLANCEStylish black case from Zalman with black mesh front Tinted acrylic glass side panel Space for 240 mm radiator Four pre-installed fans with white LED lighting CPU coolers up to 175 mm in height are compatible ZALMAN I3 MIDI-TOWER FOR WELL COOLED GAMING HARDWAREThree fans with white LED lighting positively beam through the black mesh front of the Zalman i 3 a sign of things to come when you take into account the middling size of the case & realise that it can hold up to six 120 mm fans three in the front two in the roof & one in the rear above the PCI slots The two slots in the roof aside Zalman equips the i 3 with four 120 mm fans illuminated in white The IO panel

Includes:: integrated fan controls making the case perfect for keeping control over airflow & it supports controlling up to six fans The front of the case can as an alternative to the pre-installed fans support a 240 mm radiator CPU coolers up to a height of 175 mm may be installed The Zalman i 3 is designed for supporting powerful overclocking-ready ATX-format motherboards a total of seven PCI slots in the back of the case Powerful graphics cards can be up to 360 mm long & the pre-installed fans will help make sure they are kept cool DESIGN FANS & CONNECTIVITYThe Zalman i 3 is matte black on the outside & inside The tinted shiny acrylic glass side makes for a pleasant contrast to the matte black of the rest of the case The four pre-installed glowing white LED fans only add to the overall effect These can be controlled via the integrated IO panel that uses buttons for increasing or reducing fan speeds A total of up to six fans are supported in addition the IO panel comes with the obligatory controls we take for granted including jacks for audio out & microphone support Two USB (Universal Serial Bus) 20 ports & a USB (Universal Serial Bus) 30 port (Type A) enable the quick & convenient insertion of USB (Universal Serial Bus) sticks or other peripherals without having to scrabble around beneath your desk beforehand Behind the black PSU shroud users can install PSUs up 180 mm long a hard drive cage is also present &

Includes:: two removable sleds on each of which you can install a 35- or 25 hard drive or SSD These are discrete & hidden away from view Two further 25 drives are located in front of the motherboard tray between the motherboard & front fans A fifth 25 drive can be installed to the rear of the motherboard tray below the CPU backplate cut-out Technical Details Dimensions 204 x 479 x 445 mm (W x H x D) Material Steel acrylic glass plastic Weight approx 47kg Colour Black Format ATX Micro-ATX Mini-ITXFans 1x 120 mm (Rear)3x 120 mm (Front)2x 120 mm (Top) Pre-installed 1x 120 mm (Rear white LED lighting)3x 120 mm (Front white LED lighting) Radiator Mountings 1x max 120 240 mm (front) Drive Bays 2x 2535 (internal)3x 25 (internal)PSU (optional) ATXExpansion Slots 7IO Panel 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 202x Audio Max GPU length 360 mm Max CPU cooler height 175 mm Max PSU length 180 mm



...

With the K1 Rev A Zalman is supplying a stylish midi tower with a tempered glass side panel two pre-installed fans power supply unit slot clever cable management & stylish RGB lighting FEATURESStylish mid-tower by Zalman in black Solid Front Panel with RGB Lighting Tempered Glass Side Panel PSU Shroud Removable dust filters in the Top Bottom & Front Space for 2x 35 25 & 2x 25 inch drives Up to three radiators (1x 120mm 1x 360280mm & 1x 240mm) Two pre-installed 120mm fans (1x RGB 1x Non-RGB) Supports Graphics cards up to 380mm in length Zalman has given the K1 Rev A a Tempered Glass Side Panel & PSU Shroud The interior of the chassis is completely black to match the rest of the case In the bottom of the case there is a PSU Shroud for power supplies up to 190mm in length & a modular drive cage for two 35 or 25 HDDSSD's Two additional 25 drives can be mounted on the back of the motherboard tray The minimalist front offers subtle RGB lighting While Two pre-installed 120mm fans an RGB fan in the rear of the chassis & a Non-RGB fan in the front ensure good ventilation The front of the Zalman K1 Rev A can accommodate a total of up to three 120mm fans while there is space for up to two 120mm fans in the bottom & in the Top Processor coolers must not exceed a height of 178mm while graphics cards can be up to 380mm in length As a special feature the Zalman K1 Rev A also offers options for installing water cooling The case can accommodate up to three radiators a 120mm radiator in the rear of the chassis a 360280mm radiator in the front & a 240mm radiator in the top Removable dust filters in the top bottom & front keep the case dust-free Inside stowed spaces along the edges of the housing ensure tidy cable management SPECIFICATIONSDimensions (W x H x D)
- 212 x 465 x 398mm Material
- Steel Tempered Glass Plastic Weight
- 58kg Colour
- Black Form Factor
- ATX Micro-ATX Mini-ITXFan Support
- 3x 1202x 140mm (front)1x 120140mm (rear)2x 120140mm (cover)2x 120mm (bottom)2x 120mm (vertical bracket) Fans pre-installed
- 1x 120mm (front)1x 120mm (RGB rear) Radiator Support
- 1x 240mm (Top)1x 360280mm (front)1x 120mm (rear wall) Drive Support
- 2x 35 25 (internal)2x 25 (internal) Power Supply Form Factor
- Standard ATXDust Filters
- Bottom Front Top Expansion slots
- 7IO panel
- 2x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x per audio inout 1x LED control button 1x power button 1x reset button Maximum GPU Length
- 380mm Maximum PSU Length
- 190mm Maximum CPU Cooler Height
- 178mm















...

Zalman's new cooling stand provides six different reclining angles for your laptop netbook & also provides quiet & safe cooling to the underside of the machine with a choice of two fan speeds It offers an elegant & solid design & gives you maximum comfort while using your machine for long periods of time The angle of adjustment can be varied from 22&176; to 43&176; & its rubber grip-strips prevent sliding The NS1000F's fans are powered from a USB (Universal Serial Bus) port on your machine so there are no extra plug-in DC adapters needed The cooling stand works best with machines having up to a maximum of 132 screen size
- Elegant & solid design- Adjusts the display's height for comfortable viewings- Six angle settings from 22&176; to 43&176;- Rubber Grip-Strips prevent notebooks from sliding- USB (Universal Serial Bus) powered for convenience Specifications--

Dimensions 300 x 54 x 267 mm (W x H x D)- Material aluminum rubber silicone- Colour Black- Weight 689 g- Fans 19
- 25 d B (A) 12001600 r min- Angle 22
- 43 degrees




...

The R2 Black Mid-Tower from Zalman is an inexpensive but superbly designed PC case Part of the R series it

Includes::

...

The R2 White Mid-Tower from Zalman is an inexpensive but superbly designed PC case Part of the R series it

Includes::

...

The ingeniously designed S2 Midi-Tower from Zalman makes for an affordable case in the new S-series & offers a large acrylic glass side panel An attractive grid-style front panel

Includes:: a dust filter & the pre-installed 120 mm fan ensures optimal airflow within the case Additional removable dust filters are available in the roof & in the bottom of the case Last but not least the PSU shroud helps provide a tidy interior where there is plenty of space to install your hardware THE ZALMAN S2 MIDI-TOWER AT A GLANCEAttractive design with large tinted acrylic glass side panel 120 mm fan pre-installed Well-equipped IO panel with 2x USB (Universal Serial Bus) 20 &38; 1x 30 &38; Audio-In Out Up to two SSDs HDDs or a max of four SSDs Removable dust filter &38; cable management with airflow-optimised front panel Graphics cards up to 330 mm long &38; CPU coolers up to 156 mm tall Space for up to one 240 mm radiator or two 120 mm radiators THE FEATURES OF THE ZALMAN S2 CASE IN DETAILThe attractive exterior of the Zalman S2 is rounded out by the addition of some highly desirable consumer-friendly additions on the inside As such the case offers a clean look as well as a PSU shroud & plenty of space for cable management behind the motherboard tray Up to two 35 hard drives or two 25 SSDs which can be installed without needing tools are located in a HDD cage behind the power supply The reverse of the motherboard tray allows for two further SSDs Underneath the PSU shroud is space for a large PSU of up to 180 mm in length Six cut-outs are available to assist users in cable management There is a fan pre-installed in the back of the case Two further 120 mm fans can be installed on the top side of the PSU shroud & in the roof of the case along with three at the front of the case The front can hold a 240 mm radiator instead of fans if you prefer as well as a smaller 120 mm fan in the rear The bottom & the roof include removable dust filters & the stylish mesh-style front with its grid is also kitted out with a dust filter This case will certainly help to keep your expensive hardware in great condition The IO panel with a USB (Universal Serial Bus) 30 connector & two USB (Universal Serial Bus) 20 connections offers the basics & is located to the front of the roof Multiple long graphics cards up to 330 mm can fit in this premium case & would make the Z2 the perfect foundation for a high-end gaming system It also

Includes:: a large cut-out in the motherboard tray to allow users to install large CPU coolers that include a backplate making stable CPU cooler mounting a breeze
- the cooler itself can be up to 156 mm tall Technical Details Dimensions 189 x 451 x 412 mm (Wx Hx D) Material Steel plastic acrylic glass Weight approx 4kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal possible fans 3x 120 mm (Front)2x 120 mm (Roof)2x 120 mm (Top of PSU shroud)1x 120 mm (Rear) Pre-installed 1x 120 mm (Rear) Radiator Mountings 1x max 240 mm (Front)1x max 120 mm (Rear) Dust filter (removable) Front bottom front Drives 2x 3525 (internal)2x 25 (internal)PSU (optional) Standard ATXExpansion Slots 7IO Panel 1x USB (Universal Serial Bus) 302x USB (Universal Serial Bus) 201x Audio In Out Max GPU length 330 mm Max PSU length 180 mm Max CPU cooler height 156 mm




...

The Zalman S4 Plus is a budget friendly midi tower case with enough space for all your components Aesthetically the case is excellent with an acrylic glass side panel to display the components such as the two pre-installed 120mm RGB fans It has a solid construction in an eye-catching brushed aluminium THE ZALMAN S4 PLUS MIDI TOWER AT A GLANCESimple elegant design Tinted side panel made from acrylic glass Two pre-installed 120mm RGB fans Mesh front panel for optimal airflow Fully featured IO panel with 1x USB (Universal Serial Bus) 20 1x USB (Universal Serial Bus) 30 & audio jack Room for graphics cards up to 315mm long & CPU coolers up to 160mm in height Space for up to a 240mm radiator or two 120mm radiators THE ZALMAN S4 PLUS CASE IN DETAILThe Zalman S4 Plus's attractive exterior is complemented by clever details on the inside For instance a power supply shroud creates a neat & tidy look & can hold a power supply up to 180mm long There are also good options for cable management Cables can run behind the motherboard or through the six recesses In respect to cooling two 120mm RGB fan are pre-installed in the front & another one is on the back Two additional 120mm fans can be attached to the cover & above the PSU shroud If you prefer water cooling a 240-millimeter radiator can be attached to the front Removable dust filters on the base & top ensure good airflow which is enhanced by the mesh front panel There is space for up to two 35-inch hard drives or one 25-inch SSD in an HDD cage behind the power supply Another SSD can be installed behind the motherboard tray GPUs up to 315mm in length can be accommodated if no fan is fitted to the front Finally the IO panel is equipped with a USB (Universal Serial Bus) 30 & a USB (Universal Serial Bus) 20 port All in all then the Z4 the ideal foundation for a well-equipped gaming system SPECIFICATIONDimensions 206 x 458 x 400 mm (W x H x D) Material steel plastic acrylic glass Weight approx 37kg Colour black gray Form factor ATX Micro-ATX Mini-ITXTotal fans possible 3x 120 mm (front)2x 120 mm (lid)2x 120 mm (top of power supply cover)1x 120 mm (back) Pre-installed 2x 120 mm (front)1x 120 mm (back)radiator Mountings 1x max 240 mm (front)1x max 120 mm (back) Dust filter (removable) bottom lid Drive Bays 2x 35 25 inch (internal)1x 25 inch (internal) Power supply (optional) Standard ATXExpansion slots 7I O panel 1x USB (Universal Serial Bus) 301x USB (Universal Serial Bus) 201x per audio in out Maximum graphics card length 315 mm (without front fan) Maximum power supply length 180 mm Maximum height of CPU cooler 160 mm ...