This rugged drive enclosure redefines data protection for on-the-go professionals The military-grade construction protects your sensitive data from harsh field conditions It makes sure you&re equipped for unexpected challenges with a ruggedized water dust vibration & shock resistant enclosure Keep your data safe & secure even through sudden downpours or dust storms The robust enclosure provides superior water & dust resistance with an IP54 rating The rugged drive enclosure is enveloped in a silicone protective sleeve & engineered to help protect your drive from accidental & unexpected shock vibrations & drops It&s Military MIL-STD-810G rated & test-proven to withstand drops of up to 4 meters (13 feet) It was drop tested using a solid-state drive in the enclosure Wherever you go the rugged drive enclosure delivers reliable data protection inside & out with a tough-wearing exterior casing The flexible shock-resistant silicone sleeve hugs the entire perimeter to provide an extra measure of protection absorbing the impact of accidental bumps rough baggage handling or drops Inside an extra layer of silicone provides added stability & security It&s easy to turn your 25in SATA III (6 Gbps) solid-state drive or hard drive into external storage Simply remove the silicone sleeve open the latch to insert your 25 drive into the rugged enclosure & plug the included USB (Universal Serial Bus) cable into the computer or hub USB (Universal Serial Bus) port There are no screws or tools needed Save time in the field by storing & transferring content quickly Enhanced with UASP (USB Attached SCSI Protocol) this rugged drive enclosure performs with a 70 faster read speed & 40 faster write speed over conventional USB (Universal Serial Bus) 30 when paired with a UASP-enabled host controller UASP is supported in Windows 8 Mac OSX (108 or above) & Linux In testing UASP performs with a 70 faster read speed & 40 faster write speed over traditional USB (Universal Serial Bus) 30 at peak performance At the same peak in testing UASP also shows an 80 reduction in required processor resources Testing results were obtained using an Intel Ivy Bridge system a UASP enabled Star Tech enclosure & a SATA III (6 Gbps) solid state drive Protect your data even in the toughest field conditions Military Rated (MIL-STD-810G) drive enclosure provides exceptional shock resistance Outstanding water & dust resistance with IP-54 rating No tools needed to install or replace the hard drive Fast performance with USB (Universal Serial Bus) 30 w UASP & SATA III (6 Gbps) Works even in extreme temperatures of -40° to 85°C (-40°F to 185°F) Storage Disk Size 25 Inches Maximum Enclosure Capacity - 1 x 25 in SATA Interfaces Ports SATA Yes SATA Connector (s) 1 x SATA Environmental Environmental Operating Temperature -40 to 84 °C
- Humidity 20 to 95 Physical Form Factor Hard Drive Enclosure LED Status Indicators 1
- Diagnostic LED (Drive Power & Activity) In The Box 1
- USB (Universal Serial Bus) 30 rugged 25in enclosure • 1
- USB (Universal Serial Bus) 30 cable • 1
- Foam pad for 7mm drives • 1
- Instruction manual Dimensions 113 cm (W) x 145 cm (D) x 27 cm (H)
- Weight 0200kg






...

The MHD2HDF11 Samsung Galaxy MHL Adapter is an active Micro USB (Universal Serial Bus) to HDMI Video Adapter that enables you to connect a Samsung Galaxy 11 Pin MHL 20-enabled smart phone or tablet (S3 S4 Note 2 or future MHL11 pin devices) to a non-MHL-enabled HDTV monitor or projector through HDMI The adapter makes it easy to connect your MHL 20-enabled smartphone to a large screen display & share your photos video (with supporting audio) & other content stored on your mobile device on a large screen For added convenience the mobile adapter device supports RCP (Remote Control Protocol) which means that you can use your television remote control to operate your smartphone on televisions that are equipped with CEC or Anynet For maximum video & audio quality this 11-pin MHL HDMI adapter supports 1080p output resolution & 71-channel digital audio which helps deliver an optimized multimedia experience To prevent battery drain the compact adapter features a Micro USB (Universal Serial Bus) port on the side that lets you charge your mobile device while it&s in use This compact active adapter offers a Micro USB (Universal Serial Bus) port on the side for the added benefit of simultaneously charging your connected mobile device so it is always ready to use Backed by a Star Tech 2-year warranty & free lifetime technical support 1080p video output Digital audio supported Works with MHL 20 devices (Samsung S3 S4 Note 2 & future MHL 11pin devices) Simultaneous charging to the mobile device when Micro USB (Universal Serial Bus) charge cable (not included) is attached RCP (Remote Control Protocol) for TV control of your mobile device with CEC or Anynet TV supporting HDTVs Compact & easy to transport ...

Make a right-angled connection to your SATA drive for installation in tight spaces
- 1x SATA connector
- 1x Right-angled 90-degree

...

Power an LP4 Molex device from a SATA Power connection on your computer power supply
- 1x SATA plug
- 1x Molex (LP4) female

...

The SAT2IDEADP SATA to IDE hard drive adaptor enables you to use your 25-inch 35-inch IDE based (PATA) hard drives in most Star Tech SATA based HDD docking stations & drive duplicators The SAT IDE Adaptor features all-metal construction that ensures maximum durability & is fully compatible with IDE hard drives up to ATA-133 (133 M Bps) The unique mounting style of the SATAIDE Adaptor enables it to be easily mounted to an IDEATA hard drive & inserted into a SATA hard drive dock bay for quick & easy retrieval of data from older HDDs The Adaptor can also be used to install IDE hard drives into SATA only desktop computers or any other scenario that requires an IDE hard drive to be connected through Serial ATA ...

Power an IDE hard drive from a SATA Power connection This SATA to LP4 Power Cable Adapter features one LP4 female power connector & a male SATA power connector allowing you to connect an IDE hard drive to a Serial ATA power connector provided by the computer power supply The Star Techcom Advantage- Powers an IDE hard drive through a Serial ATA connection from your power supply- Backed by Star Techcom&s lifetime warranty & free technical support Ports & interfaces Connector (s) LP4 SATAConnector 2 LP4 (4-pin) Connector 1 SATA (15-pin) Technical details Quantity 1 Product colour Black Design Ro HS compliance Yes Product colour Black Weight & dimensions Width 35 mm Weight 16 g Net weight 20 g Height 10 mm Depth 50 mm ...

Securely mount case fans in a chassis with the proper screws This package of 50 PC case fan screws are great to have on hand for new system builds or upgrades The Star Tech Advantage- Self tapping thread design for quick & easy installation of most standard plastic-framed case fans- Comes in a pack of 50 for large installations or just having spares for future installations ...

Ace Techman knows how frustrating it can be when assembling a system that functions at its optimal performance when that you need are a few small parts like screws or nuts Star Tech carries all parts big or small These Self-Adhesive Rubber feet for PC Cases provide the best possible traction for your workstation Case Colour Black Form Factor Rubber ft Product Type Motherboard Standoffs Weight 003kg ...

By using this Star Tech cable you can connect your 9 pin serial port to a serial printer or transfer files from PC to PC Cable Connector End 1 1 x DB9 (Female) Cable Connector End 2 1 x DB9 (Female) Cable Length 30 m Form Factor Modem Cable Product Type Serial Cable ...

Protect your network switches from dust & contaminants by covering up the unused SFP slots This 10-pack of SFP dust covers provides an inexpensive way to protect your network switches & fiber optic equipment from dust & contaminants by covering the exposed & unused SFP slots Protect your network equipment investment Simply insert the dust covers into any empty SFPSFP slots in your network switches made from Santoprene thermoplastic rubber (TPE) the durable dust covers keep out dirt & dust protecting your networking equipment against contaminants that could cause connection issues A handy tab makes it easy to insert & remove the SFP dust covers The SFPCAP10 dust covers are backed by a Star Techcom 2-year warranty & free lifetime technical support The Star Techcom Advantage- Dust covers insert easily into unused SFP slots to protect your network switches from dust & contaminants- made from durable Santoprene thermoplastic rubber (TPE)- Tab makes it easy to insert & remove Features Compatible portsslots SFPMaterial Rubber Product colour Black Proper use Network switch Ro HS compliance Yes Weight & dimensions Width 146 mm Weight 1 g Height 149 mm Depth 101 mm Package width 125 mm Package weight 10 g Package height 149 mm Package depth 90 mm Packaging content Quantity per pack 10 pc (s) ...