Raijintek&s Leto Pro is a heatpipe-based CPU cooler that conceptually takes inspiration from their line up of slim-style coolers This provides the Leto Pro with the highest possible degree of motherboard compatibility & their respective RAM modules & slots As such this cooler offers the mid-range performance class a superb degree of performance This is achieved via the height of the cooler which at 155 mm offers an above average cooler surface area as well as four heatpipes instead of the standard three THE LETO PRO CPU COOLER FROM RAIJINTEK AT A GLANCETower cooler with superb cooling performance Four copper heatpipes with direct CPU contact Aluminium fins mounted without soldering points Low 155 mm height Two high-performance fans for effective cooling with RGB lighting Compatible with all current AMD- & Intel sockets THE LETO PRO CPU COOLER FROM RAIJINTEK IN DETAILThe aluminium heatsink counts among the flattest of its kind & its extensive compatibility is due in no small part to this To this end the heatsink is designed for the installation of two fans rather than one This offers the option of a future upgrade for increasing airflow & cooling performance yet further The copper heatpipes rely on Raijintek&s CDC technology which enables direct CPU contact This increases the effectiveness with which heat is transported away from the processor The elegantly & as discussed custom design renders soldering between individual fins & heatpipes unnecessary instead opting to press them together On the one hand this minimises the risk of damage to the heatpipes while increasing its thermal efficiency But equally this approach also minimises the environmental impact of its manufacturing thus putting the Leto Pro at the fore of &green IT& The sleek-looking black Iris LED fans with RGB lighting are 120 mm with a 4-pin PWM connector & a gigantic maximum airflow of 9514 m&sup 3;h It can be controlled by the motherboard which automatically adjusts in accordance with power requirements This also makes the Leto Pro whisper-quiet while generating maximum cooling power when required The fans are attached with vibration-damping pins instead of clamps Any current socket along with their respective CPUs can utilise the Leto thanks to its mounting kit The installation is both simple & user friendly while the bundled instruction manual explains the installation process in a clear & concise manner Technical Details Dimensions 127 x 155 x 76 mm (W x H x D) Material Aluminium (fins base) copper (heatpipes) Heatpipes 4x & Oslash; 6 mm Fans 2x 120 mm (max 25 d B (A) 800
- 1800 RPM 9514 m&sup 3;h 16 mm H2O)LED Lighting RGBInput Voltage 12 VStart Voltage 75 VConnector 4-Pin PWMLifespan 40000 h Compatibility Intel Socket 775 115x 1366 2011 2011-V3 2066AMD Socket AM4 AM3 () AM2 () FM2 () FM1
...

Raijintek&s Leto is a heatpipe-based CPU cooler that conceptually takes inspiration from their line up of slim-style coolers This enables the highest possible degree of motherboard compatibility & their respective RAM modules & slots It offers considerable cooling performance given its position in the mid-range This is achieved via the height of the cooler which at 157 mm offers an above average cooler surface area as well as three heatpipes The aluminium heatsink counts among the flattest of its kind & its extensive compatibility is due in no small part to this In cases with limited space available the Themis Leto is ideal with its 5 cm depth The heatsink is designed for the installation of two fans rather than just one This gives it the ability to be upgraded in the future for increased airflow & cooling performance The copper heatpipes utilise Raijintek&s CDC technology to enable direct CPU contact This allows exhaust heat to be transferred away from the processor with even greater effectiveness The elegant in-house design of the fins& heatpipe connection removes the need for the soldering of individual layers instead opting to press them On the one hand this approach minimises the risk of heatpipe damage while increasing its heat transfer efficiency on the other it leads to a notable reduction in its environmental impact as such the Leto can certainly be said to have been manufactured with an eye towards "green IT" The sleek black LED fan with white lighting is a 120 mm model with a 4-pin PWM connector offers a massive maximum airflow of 11383 m 3h This can be regulated by the motherboard which automatically regulates its speed in accordance with performance requirements this also allows the Leto to function extremely quietly when possible as well as providing maximum performance when necessary The fan is attached by means of vibration-dampening pins instead of brackets Four additional pins allow the installation of a further 120 mm fan if required Any current socket along with their respective CPUs can utilise the Leto thanks to its mounting kit The installation is both simple & user friendly while the bundled instruction manual explains the installation process in a clear & concise manner Technical Details Dimensions 122 x 157 x 76 mm (W x H x D) Material Aluminium (fins base) copper (heatpipes) Weight 570 g (without fan) Heatpipes 3x & Oslash; 8 mm Fan 120 mm (max 29 d B (A) 800
- 1800 UMin 11383 m 3h 12 mm H2O)LED Lighting White Input Voltage 12 VStarting Voltage 7 VConnector 4-Pin PWMLifespan 40000 h Compatibility Intel Socket 775 115x 1366 2011 2011-V3 2066AMD Socket AM4 AM3 () AM2 () FM2 () FM1
...

Raijintek PWM fan with addressable RGB LEDs which comes with a high static pressure with low noise in addition to their colourful lighting Thanks to the included RGB hub & remote control the RGB illumination of the Macula 12 Rainbow RGB can be extensively controlled Features- PWM connection for precise speed control via mainboard- On the fan frame mounted decoupler for vibration reduction- Two RGB dispersion rings with individually addressable RGB LEDs-

Includes:: controller hub for a total of 6 fans & remote control- 800
- 1800 rpm speed at <25 d B (A)- 56 cfm airflow & 189 mm H2O air pressure The Macula 12 Rainbow RGB fans The flow-optimized rotor blade design of the Macula fan in conjunction with its high-quality plain bearings ensures smooth running & outstanding performance data at the same time At 1800 rpm the fans generate just 25 d BA & an airflow of over 56 cfm & a high static pressure of 189 mm H2O In addition the fans have vibration-damping inserts in the corners which minimize vibration transmission to the housing & thus contribute to low noise Complex dynamic RGB lighting effects & PWM control The two dispersion rings contain digitally addressable RGB LEDs In conjunction with the included RGB controller hub & the infrared remote control 300 RGB lighting effects can be configured & their speed & intensity controlled The fan speed is controlled as usual via the mainboard via a PWM connection on the controller Technical details Dimensions 120 x 120 x 25 mm (W x H x D) Connection controller 4-pin PWMConnection fan 6 pin PWM RGBSpeed 800
- 1800 rpm Volume max 25 d B (A) Airflow 56 cfm Static pressure max 189 mm H2 O Voltage 12 VPower Consumption 876 WContents- 2x fan- 1x 4-pin PWM Molex adapter- 1x remote control- 1x 6-port controller hub- 8x fan screws



...

Raijintek PWM fan with addressable RGB LEDs which comes with a high static pressure with low noise in addition to their colourful lighting Thanks to the included RGB hub & remote control the RGB illumination of the Macula 12 Rainbow RGB can be extensively controlled Features- PWM connection for precise speed control via mainboard- On the fan frame mounted decoupler for vibration reduction- Three RGB dispersion rings with individually addressable RGB LEDs-

Includes:: controller hub for a total of 6 fans & remote control- 800
- 1800 rpm speed at <25 d B (A)- 56 cfm airflow & 189 mm H2O air pressure The Macula 12 Rainbow RGB fans The flow-optimized rotor blade design of the Macula fan in conjunction with its high-quality plain bearings ensures smooth running & outstanding performance data at the same time At 1800 rpm the fans generate just 25 d BA & an airflow of over 56 cfm & a high static pressure of 189 mm H2O In addition the fans have vibration-damping inserts in the corners which minimize vibration transmission to the housing & thus contribute to low noise Complex dynamic RGB lighting effects & PWM control The two dispersion rings contain digitally addressable RGB LEDs In conjunction with the included RGB controller hub & the infrared remote control 300 RGB lighting effects can be configured & their speed & intensity controlled The fan speed is controlled as usual via the mainboard via a PWM connection on the controller Technical details Dimensions 120 x 120 x 25 mm (W x H x D) Connection controller 4-pin PWMConnection fan 6 pin PWM RGBSpeed 800
- 1800 rpm Volume max 25 d B (A) Airflow 56 cfm Static pressure max 189 mm H2 O Voltage 12 VPower Consumption 876 WContents- 3x fan- 1x 4-pin PWM Molex adapter- 1x remote control- 1x 6-port controller hub- 12x fan screws



...

A cooler change is particularly useful if the factory-installed cooler is too loud or does not provide enough cooling capacity With the Morpheus 8057 provides Raijintek a powerful cooler for graphics cards from NVIDIA & AMD reference design to With its enormous size & the possibility of mounting two large fans it offers the Morpheus 8057 a huge cooling potential The features of the Raijintek Morpheus 8057 heatpipe VGA cooler at a glance- High-performance VGA cooler with copper heat pipes- For NVIDIA Ge Force RTX 2060 to 2080 Ti in reference design- Also for AMD Radeon RX 5600 XT to 5700 XT in reference design- High cooling capacity for up to 360 W TDP- Twelve heat pipes made from copper- Including storage cooler & retaining clips Raijintek Morpheus 8057 Tremendous cooling performance for graphics cards Raijintek equips the Morpheus 8057 with a polished copper base plate which conducts the waste heat from the graphics processor to twelve copper heat pipes These run through the total of 129 aluminum fins of the heat sink To cool additional chips Raijintek

Includes:: three copper heatsinks & eight aluminum heatsinks as well as corresponding heat-conducting pads with the Morpheus 8057 The graphics card cooler is suitable for waste heat of up to 360 watts TDPTwo 120 mm fans can be mounted on the Raijintek Morpheus 8057 The solution for installing a fan is simple Included in delivery are Brackets for 13 & 25 mm fans included Since fans are not included in the scope of delivery there is maximum freedom of choice & the option of implementing practically any configuration from ultra-silent to maximum-OCThe mounting system of the Morpheus is a real highlight This consists of two strips that are screwed to the base plate The Morpheus 8057 is suitable for NVIDIA graphics cards of the type Ge Force RTX 2060 (Super) RTX 2070 (Super) & RTX 2080 (Super Ti) as well as AMD Radeon RX 5600 XT & 5700 (XT) in the reference design For a more stylish look the entire cooler is covered with a black coating Note To install the Morpheus the original cooler must be dismantled which means that the warranty against the graphics card manufacturer is lost The conversion is therefore at your own risk Remnants of thermal paste & pads must be removed very carefully before installation otherwise the passive heat sinks for example could fall off when heated The thermal pads & thermal paste required for assembly are included in the scope of delivery An adapter cable for connecting (PWM) fans to the graphics card is not included in the scope of delivery & must be ordered separately Technical details-

Dimensions (GPU cooler) 254 &215; 100 &215; 44 mm (L x W x H)-

Dimensions (RAM heatsinks)- Type A 85 x 11 x 62 mm (W x H x D)- Type B 50 x 11 x 4 mm (W x H x D)- Type C 50 x 141 x 10 mm (W x H x D)- Type D 37 x 7 x 10 mm (W x H x D)- Type E 59 x 6 x 11 mm (W x H x D)- Weight approx 515 g- Material copper (base plate heat pipes) aluminum (fins)- Heat pipes 12x &216; 6 mm- Heat dissipation capacity max 360 W- Fan (optional) 2x 120 mm Compatibility- AMD Radeon (reference design)- RX 5600 XT- RX 5700 RX 5700 XT- NVIDIA Geforce (reference design)- RTX 2060 RTX 2060 Super- RTX 2070 RTX 2070 Super- RTX 2080 RTX 2080 Super RTX 2080 Ti Contents- 1x Raijintek Morpheus 8057 GPU cooler- 2x RAM heatsink type A (copper)- 1x RAM heatsink type B (copper)- 1x RAM heatsink type C (aluminum)- 1x RAM heatsink type D (aluminum)- 6x RAM heatsink type E (aluminum)- 2x mounting brackets- 1x backplate- 2x rubber pads- 3x thermal pads type A- 2x thermal pads type B- 4x washers- 4x M3 screws- 4x spacers- 4x spring screws- 4x fan clips (25 mm)- 4x fan clips (13 mm)- 1x thermal paste- 1x operating instructions





...

Rai Jintek presents the Morpheus II a monstrously powerful VGA cooler with a cooling performance of superlatives with first-class processing quality The Morpheus is equipped with a very large fully nickel-plated heat sink with a total of 129 aluminum fins which can be equipped with several large fans which can effectively dissipate up to 360 watts of power loss Despite the impressive length of 254 cm incompatibilities with graphics cards with a double power supply are avoided as the heat sink does not extend beyond the long PCBs of modern high-end graphics cards Features- Cooling Capacity 360 watts TDP- 12 pcs copper heat pipers & 129 fins for efficient heat dissipation- High compatibility with modern &38; future VGA cards- 24pcs heat-sink for RAM &38; 1 big heat-sink for VRM- Thermal adhesive to lower RAM & VRM temperatue significantly & assure proper bond
- Supports 2 x 120mm Fan- Whole heat-sink nickel plated Specifications-

Dimensions 254 x 44 x 98 mm (W x H x D)- Weight approx 515 g- Material nickel-plated copper (bottom plate heatpipes) nickel-plated aluminum (lamellas)- Heatpipes 12x &216; 6 mm- Heat dissipation max 360 W- Fan (optional) 2x 120 mm Compatibility AMD Radeon (reference design)R9 390x R9 Fury Hawaiian chip (R9 290 290x) Curacao chip (HD 7850 7870 xt; R9 270 270x)NVIDIA Ge Force (reference design)1080 Ti 1080 970 980 980 Ti 780 Ti 780 770 760 650 650 Ti 660 660 Ti 680


...

Description below is for brand new sealed products & may not represent the item fully Images are for illustration only Contents & item condition may vary All items are sold in working condition Instruction manuals guides downloadable or online accessible content listed on the product are not guaranteed to be included Rai Jintek presents the Morpheus II a monstrously powerful VGA cooler with a cooling performance of superlatives with first-class processing quality The Morpheus is equipped with a very large fully nickel-plated heat sink with a total of 129 aluminum fins which can be equipped with several large fans which can effectively dissipate up to 360 watts of power loss Despite the impressive length of 254 cm incompatibilities with graphics cards with a double power supply are avoided as the heat sink does not extend beyond the long PCBs of modern high-end graphics cards Features- Cooling Capacity 360 watts TDP- 12 pcs copper heat pipers & 129 fins for efficient heat dissipation- High compatibility with modern &38; future VGA cards- 24pcs heat-sink for RAM &38; 1 big heat-sink for VRM- Thermal adhesive to lower RAM & VRM temperatue significantly & assure proper bond- Supports 2 x 120mm Fan- Whole heat-sink nickel plated Specifications-

Dimensions 254 x 44 x 98 mm (W x H x D)- Weight approx 515 g- Material nickel-plated copper (bottom plate heatpipes) nickel-plated aluminum (lamellas)- Heatpipes 12x &216; 6 mm- Heat dissipation max 360 W- Fan (optional) 2x 120 mm Compatibility AMD Radeon (reference design)R9 390x R9 Fury Hawaiian chip (R9 290 290x) Curacao chip (HD 7850 7870 xt; R9 270 270x)NVIDIA Ge Force (reference design)1080 Ti 1080 970 980 980 Ti 780 Ti 780 770 760 650 650 Ti 660 660 Ti 680

...

The Raijintek Mya RBW is a tower cooler for processors from AMD & Intel The massive heat sink is made from glossy black anodized aluminum The wave-shaped cooling fins optimize the airflow & are penetrated by six copper heatpipes These run through the base plate & touch the CPU directly over a large area In this way a rapid delivery of the processor heat passes through the heat sink In addition the cooling tower is equipped with an addressable RGB LED lighting in the lid Features- Black Tower Cooler by Raijintek- 6x & Oslash; 6 mm direct-touch copper heatpipes- Slim 120mm PWM fan with 42 CFM- Addressable RGB LED lighting with 16 LEDs- Suitable for Intel & AMD processors Raijintek Mya RBW processor cooler with RGB illumination The Raijintek Mya RBW CPU cooler offers a high cooling potential & a chic look The wavy aluminum fins are black anodized & are traversed by a total of 6 x 6mm diameter copper heatpipes These are framed in the partially aluminum base plate & touch the processor directly As a result its waste heat is released particularly quickly to the radiator A PWM-controlled 120 mm fan is attached to the heat sink by clamps & provides fresh air at a maximum speed of 1400 rpm In the lid of the tower cooler are 16 RGB LEDs behind a milky white plastic & a black stencil inset These can be addressed via a 3-pin RGB header The lighting effects can therefore be synchronized with compatible RGB LED equipment Technical details-

Dimensions 130 x 163 x 86 mm (W x H x D)- Material copper (heatpipes) aluminum (bottom plate fins) plastic (lid)- Weight 925 g- Heatpipes 6x & Oslash; 6 mm- Colour Black Fan- Raijintek 12013-

Dimensions 120 x 120 x 13 mm (W x H x D)- Speed 200
- 1400 rpm- Volume max 2843 d B (A)- 4-pin PWM- Delivery volume max 42 CFM- Static pressure max 067 mm H2O- LED lighting RGB- Number of LEDs 16- Connection 3-pin RGB (5V) Compatibility- Intel Sockets 775 1150 1151 1155 1156 1366 201x 2066- AMD Sockets AM4 AM3 AM3 AM2 AM2 FM2 FM2




...

The Raijintek Ophion Evo is an outstanding example of a Small Form Factor (SFF) case Its

Dimensions are a compact

...

ORCUS 360ORCUS RAIJINTEK’s evolution All-In-One liquid cooling CPU cooler designed in Germany & made in Taiwan With several years of experience in liquid cooling products & cooperation with global engineers & manufactures RAIJINTEK’s RD team developed the concepts of most performing AIO CPU liquid cooler & spent years to design one of most user friendly & spot light product for enthusiasts ORCUS’s copper water block is a most advanced design of micro channels (01mm) extra large contact fin area with multiple channels for the best direct flow of liquid More than this ORCUS’s Pump is placed externally which will not incur vibration & stress on MB & CPU ORCUS external Pump is designed for high Q-Max low d BA & contains a reliable Bearing type Not only a new design pump & water block are used ORCUS’s radiator is also using high density design fin radiator ORCUS has led the trend to designing a “ Rotating Blade” with most popular RGB LED lighting inside tank which able to show water flow & indicates the coolant level More than rotating blade indicator ORCUS is also designed to be refillable Furthermore ORCUS cooling fan system is with 12025 RGB PWM fans 8port control hub & remote controller With switch function (MB ; Remote) of controller Hub either you can connect control hub to MB RGB header (thus all cooling system RGB lighting including MB RGB will be controlled synchronously by MB) or you can switch to “remote” of control hub if no RGB header on MB then all RGB lighting will be controlled by Remote controller ORCUS is not only one of the best performing All-In-One liquid cooling at the market but it is the most user friendly AIO cooler in the world by the pre-filled liquid providing extra 100ml coolant for your convenience for refill which brought to you for the joy of friendly design & the surprisingly efficient performance
- Best performing most user friendly & most spot light catch an AIO liquid cooling system at market- All-In-One liquid CPU cooler with external PUMP copper Water block & Rotating Blade with RGB light- New design & External Pump with high Q-max (66 LH) & no vibration incurred on MB & CPU- Durable & reliable PUMP Bearing type
- Ceramic axis- Copper water block by micro channel extra large contact fin area with multiple channels to provide best flow of liquid- Cooling fan system with 12025 RGB PWM fans 8 port control hub & remote controller- 8port Control hub with switch of "MB ; Remote" to provide most usage of RGB lighting control- Rotating Blade design with RGB LED inside tank to show water flow & indicates the coolant level- 3pcs performing 12025 PWM fans with RGB lighting- Specific 11 fan blade design & 8pcs Anti-vibration rubbers- Refillable & high capacity coolants pre-filled design- 360mm high density fin radiator with 12 channels- Solid mounting kits to provide sturdy installation- Mesh tube with low evaporation rate- Multiple mounting kits for modern sockets of INTEL & AMD CPUPerformance Fan noise level (min) 23 d B Fan noise level (max) 23 d B Pump noise level 25 d B Bearing technology Ceramic Pulse-width modulation (PWM) support Yes Minimum air pressure 17 mm H2 O Airflow 4217 m&sup 3;h Radiator Yes Supported processor sockets Socket AM2 Socket AM3 Socket AM4 Socket FM2 Socket FM2 Purpose Processor Pump motor speed (max) 5000 RPMPump motor speed 5000 RPMNumber of fans 2 fan (s) Fan speed (min) 800 RPMFan speed (max) 1800 RPMFan connector 4-pin Compatible processor series Intel Core™ i 3 Intel Core i 5 Intel Core i 7 Intel Core i 7 Extreme Edition Intel Core i 9 Intel Core i 9 Extreme Edition Built-in fan Yes Technical details Quantity 1 Fan noise level (min) 23 d B Fan noise level (max) 23 d B Pump noise level 25 d B Bearing technology Ceramic Pulse-width modulation (PWM) support Yes Minimum air pressure 17 mm H2 O Airflow 4217 m&sup 3;h Radiator Yes Supported processor sockets Socket AM2 Socket AM3 Socket AM4 Socket FM2 Socket FM2 Purpose Processor Pump motor speed (max) 5000 RPMPump motor speed 5000 RPMNumber of fans 2 fan (s) Fan speed (min) 800 RPMFan speed (max) 1800 RPMFan connector 4-pin Compatible processor series Intel Core™ i 3 Intel Core i 5 Intel Core i 7 Intel Core i 7 Extreme Edition Intel Core i 9 Intel Core i 9 Extreme Edition Built-in fan Yes Power Fan power consumption 168 WPump power consumption 22 WPump voltage 12 VPump current 180 m A Fan voltage 12 VFan current 014 ADesign Illumination colour Red Green Blue Fan controller Yes Water block material Copper Tube material Copper Radiator material Aluminium Material Aluminium Copper Product colour Black Illumination LED Yes Type Internal Brightness adjustment Yes Weight & dimensions Fan

Dimensions (W x D x H) 120 x 25 x 120 mm Width 395 mm Depth 120 mm Height 28 mm Weight 950 g Pump width 695 cm Pump depth 4 cm Pump height 33 cm Packaging data Quantity 1 Packaging content Installation instruction Yes RGB controller included Yes



...