Raijintek presents the IRIS 14 Rainbow RGB a brand new fan with built-in RGB LED lighting that optimizes cooling performance with a total of eleven fan blades Thanks to this eleven-fan blade design the fan can also convince with its performance which can be seen at 10364 m&179; h delivery volume & maximum 14 mm H2O static pressure at a speed of 1500 revolutions per minute can Raijintek uses a transparent O-type LED ring for its colourful splendor which delivers impressive rainbow colours & creates a uniform brightness in all directions Features- 140 mm fan with PWM function- Optimized Elf fan blade design- Speed of 1500 rpm- Delivery volume of 10364 m&179; h- Effective static pressure of 14 mm H2O- O-type LED ring with RGB lighting- Efficient plain bearing for long durability- Anti-vibration pads to minimize the noise level RGB LED fan in 140 mm format This variant of the IRIS fan has a completely black frame whose special design is responsible for the enormously high static pressure of 14 mm H2O It is complemented by the eleven transparent rotor blades which thanks to their shape & the fan speed of 1500 revolutions per minute generate the largest possible airflow of 10364 m&179; h Equipped with special anti-vibration pads in all four corners of the fan vibration & noise levels can be minimized so that the maximum volume of the IRIS 14 Rainbow RGB is only 308 d B The special feature of the IRIS is of course the stylish RGB LED lighting which is in the form of an O-type LED ring which is integrated in the fan frame This LED ring of 21 LEDs produces a powerful colour & uniform brightness from all directions With effects like fading breathing flashing & single-colour The IRIS 14 Rainbow RGB is definitely an absolute eye-catcher in every case Up to six IRIS fans can be connected to the included port hub & their color effects can be controlled with the included remote control The control via the RGB header of compatible motherboards is also possible

Specification-

Dimensions 140 x 140 x 25 mm (W x H x D)- Weight approx 230 g- Colour Black Transparent (Frame) RGB (LEDs)- Bearing type plain bearing- Speed 400
- 1500 rpm- Delivery volume max 10364 m&179; h- Static pressure max 14 mm H2O- Volume max 308 d B (A)- Voltage 12V- Starting voltage 5V- Connection 4-pin PWM 4-pin RGB- Life expectancy 40000 h Contents 3x fans 1x 6-port hub 1x remote control 8x screws




...

Raijintek presents the IRIS 14 Rainbow RGB a brand new fan with built-in RGB LED lighting that optimizes cooling performance with a total of eleven fan blades Thanks to this eleven-fan blade design the fan can also convince with its performance which can be seen at 10364 m&sup 3; h delivery volume & maximum 14 mm H2O static pressure at a speed of 1500 revolutions per minute can Raijintek uses a transparent O-type LED ring for its colourful splendor which delivers impressive rainbow colours & creates a uniform brightness in all directions Features- 140 mm fan with PWM function- Optimized Elf fan blade design- Speed of 1500 rpm- Delivery volume of 10364 m&sup 3; h- Effective static pressure of 14 mm H2O- O-type LED ring with RGB lighting- Efficient plain bearing for long durability- Anti-vibration pads to minimize the noise level RGB LED fan in 140 mm format This variant of the IRIS fan has a completely black frame whose special design is responsible for the enormously high static pressure of 14 mm H2O It is complemented by the eleven transparent rotor blades which thanks to their shape & the fan speed of 1500 revolutions per minute generate the largest possible airflow of 10364 m&sup 3; h Equipped with special anti-vibration pads in all four corners of the fan vibration & noise levels can be minimized so that the maximum volume of the IRIS 14 Rainbow RGB is only 308 d B The special feature of the IRIS is of course the stylish RGB LED lighting which is in the form of an O-type LED ring which is integrated in the fan frame This LED ring of 21 LEDs produces a powerful colour & uniform brightness from all directions With effects like fading breathing flashing & single-colour The IRIS 14 Rainbow RGB is definitely an absolute eye-catcher in every case Up to six IRIS fans can be connected to the included port hub & their color effects can be controlled with the included remote control The control via the RGB header of compatible motherboards is also possible

Specification-

Dimensions 140 x 140 x 25 mm (W x H x D)- Weight approx 230 g- Colour Black Transparent (Frame) RGB (LEDs)- Bearing type plain bearing- Speed 400
- 1500 rpm- Delivery volume max 10364 m&sup 3; h- Static pressure max 14 mm H2O- Volume max 308 d B (A)- Voltage 12V- Starting voltage 5V- Connection 4-pin PWM 4-pin RGB- Life expectancy 40000 h Contents 2x fans 1x 6-port hub 1x remote control 8x screws




...

The Raijintek Juno Pro is a low-profile CPU cooler designed specifically to replace boxed coolers It offers a high cooling capacity for its small

Dimensions & thanks to the black anodised aluminum heat sink it offers an appealing look In addition the Top Blower is equipped with an addressable RGB LED lighting in the fan frame Features- Black top-blow cooler from Raijintek- Low-profile height of only 66 cm- 120 mm PWM fan with 35 CFM- Addressable RGB LED lighting with 15 LEDs- Suitable for Intel & AMD processors Raijintek Juno Pro RBW Top Blow Cooler with RGB Illumination The Raijintek Juno Pro RBW Top Blower Cooler impresses with small

Dimensions high cooling potential & a remarkable appearance The radially arranged aluminum fins are black in colour & are cooled by a PWM-controlled 120 mm fan with transparent fan blades at a maximum speed of 1800 rpm In the circular black fan frame 15 RGB LEDs are embedded behind milky white plastic These create a rainbow light effect inside the cooler & are addressable via a 3-pin RGB header An ideal cooler for ultra-compact housings With its compact exterior

Dimensions the Juno Pro RBW is ideal for small HTPCs & small form factor enclosures with limited space The top-down cooler has a total height of only 66 mm The PWM fan which runs between 400 & 1800 revolutions produces a whopping 35 CFM capacity at a maximum of 28 d B (A) The processor cooler is suitable for a maximum TDP of 105 watts Technical details-

Dimensions 1225 x 1225 x 66 mm (W x H x D)- Material Aluminum (base plate fins) Plastic (fan)- TDP 105W- Weight 315 g- Colour black (heat sink fan frame) transparent (fan blades) Fan-

Dimensions 120 x 120 x 25 mm- Speed 400
- 1800 rpm- Volume max 28 d B (A)- 4-pin PWM- Delivery volume max 35 CFM- Static pressure max 116 mm H2O- LED lighting RGB- Number of LEDs 15- Connection 3-pin RGB (5V) Compatibility- Intel Sockets 775 1150 1151 1155 1156 1366- AMD Sockets 754 939 940 AM2 AM2 AM3 AM3 AM4










...

Raijintek introduces the Juno-X a small compact & light CPU cooler that is ideal for HTPCs & other small computers with its max TDP of 70 Watts The "radial"-style used is reminiscent of a successful cooling concept from Zalman except in this version it is made entirely out of aluminium & its powerful 92 mm PWM fans are surrounded by the cooler fins THE RAIJINTEK JUNO-X RGB CPU COOLER AT A GLANCEAluminium CPU cooler with a radial-style design 92 mm PWM fan with RGB-LED lighting Designed for HTPCs & small computers 1200
- 2500 RPM8835 m&sup 3;h 094 mm H2O max 26 d B Compatible with modern AMD & Intel sockets COMPACT RADIAL-STYLE CPU COOLERThe Raijintek Juno-X consists of a heatsink whose aluminium fins form a ring around a slowly-turning 92 mm PWM fan with RGB-LED lighting This arrangement also allows the surrounding motherboard components to receive cooling Thanks to its low 50 mm height the Juno-X is primarily designed for use in low-profile cases that offer limited space In performance terms this cooler comes with some impressive specifications especially in regards to the 1200 to 2500 RPM range which allows for a maximum airflow of 8835 m&sup 3;h This also enables the cooler to produce a high static pressure of 094 mm H2O The cooler&s maximum 26 d B noise output means the Juno-X also functions very quietly assisted in no small part by its use of a 4-pin PWM motherboard connector The original retention module of the Juno-X enables installation on all modern AMD sockets (AM4 AM3 () AM2 () FM2 () FM1 754 939 940) Thanks to a plastic bracket the cooler can also be installed on LGA 775 & LGA 115x motherboards Installation can be performed quickly & easily by hand without the need for tools TECHNICAL DETAILSGeneral Dimensions approx 110 x 50 x 110 mm (W x H x D) Weight ca 130 g (just the heatsink) Material Aluminium TDP 70 WFan Dimensions 92 x 25 x 92 mm (W x H x D) Format 92 mm RPM 1200
- 2500 Noise Output max 26 d B
- 10 Connector 4-Pin PWMLighting RGB LEDs Air Throughput max 8835 m&sup 3;h Static Pressure 094 mm H2 O Lifespan 30000 Hours Starting Voltage 75 VVoltage 12 VCompatibility Intel Socket LGA 775 115x AMD Socket AM4 AM3 () AM2 () FM2 () FM1 754 939 940


...

Compact CPU cooler from Raijintek 92mm PWM fan 8835m&sup 3; h 094mm H2O Aluminum radial design high compatibility with AMD & Intel Raijintek presents the Juno-X a small compact & light CPU cooler With a TDP of maximum 70 watts optimal for HTPCs & other small computers The design is compared to the concept of the Zalman cooler in this version is made from aluminum & a powerful 92mm PWM fan The Raijintek Juno-X CPU cooler at a glance- CPU cooler of aluminum in the radial design- 92 mm PWM fan- Suitable for HTPCs & microcomputers- 1200
- 2500 rpm- 8835 m&sup 3; h 094 mm H2O max 26 d B- Compatible With Modern Sockets of AMD & Intel Compact CPU cooler in radial design The Raijintek Juno-X consists of a heat sink whose aluminum fins are ring-shaped around a slowly rotating 92 mm PWM fan Through this the surrounding mainboard components are also cooled down Thanks to Its small height of only 50 mm the Juno-X is particularly suitable for use in low-profile housings with limited space The cooler also attracts attention in terms of performance because in of the fan speed having a range of between 1200 & 2500 revolutions per minute with a maximum Airflow of 8835 m&sup 3; h as well as a high static pressure of 094 mm H2O The cooler also has a maximum of 26 d B the Juno-X runs even very quietly & can be connected via a 4-pin PWM connector The original retention module of the Juno-X allows mounting on all current AMD sockets AM4 AM3 AM2 754 939 940 Thanks to a plastic holder the cooler is also suitable for Intel mainboards with the socket LGA775 & LGA 115x sockets Installation is quick & easy Technical Details Cooler

Specification-

Dimensions 110 x 50 x 110 mm (W x H x D)- Weight 130g- Material Aluminum- TDP 70 WFan

Specification- Fan

Dimensions 92 x 25 x 92 mm (W x H x D)- Fan Size 92mm- Speed 1200
- 2500 RPM- Volume 26d B- Connection 4 Pin PWM- Airflow 8835 m 3 h- Static pressure 094 mm H2O- Life expectancy 30000 hours Compatibility- Intel Socket LGA 775 115x- AMD socket AM4 AM3 AM2 754 939 940









...

Raijintek&s Leto Pro is a heatpipe-based CPU cooler that conceptually takes inspiration from their line up of slim-style coolers This provides the Leto Pro with the highest possible degree of motherboard compatibility & their respective RAM modules & slots As such this cooler offers the mid-range performance class a superb degree of performance This is achieved via the height of the cooler which at 155 mm offers an above average cooler surface area as well as four heatpipes instead of the standard three THE LETO PRO CPU COOLER FROM RAIJINTEK AT A GLANCETower cooler with superb cooling performance Four copper heatpipes with direct CPU contact Aluminium fins mounted without soldering points Low 155 mm height Two high-performance fans for effective cooling with RGB lighting Compatible with all current AMD- & Intel sockets THE LETO PRO CPU COOLER FROM RAIJINTEK IN DETAILThe aluminium heatsink counts among the flattest of its kind & its extensive compatibility is due in no small part to this To this end the heatsink is designed for the installation of two fans rather than one This offers the option of a future upgrade for increasing airflow & cooling performance yet further The copper heatpipes rely on Raijintek&s CDC technology which enables direct CPU contact This increases the effectiveness with which heat is transported away from the processor The elegantly & as discussed custom design renders soldering between individual fins & heatpipes unnecessary instead opting to press them together On the one hand this minimises the risk of damage to the heatpipes while increasing its thermal efficiency But equally this approach also minimises the environmental impact of its manufacturing thus putting the Leto Pro at the fore of &green IT& The sleek-looking black Iris LED fans with RGB lighting are 120 mm with a 4-pin PWM connector & a gigantic maximum airflow of 9514 m&sup 3;h It can be controlled by the motherboard which automatically adjusts in accordance with power requirements This also makes the Leto Pro whisper-quiet while generating maximum cooling power when required The fans are attached with vibration-damping pins instead of clamps Any current socket along with their respective CPUs can utilise the Leto thanks to its mounting kit The installation is both simple & user friendly while the bundled instruction manual explains the installation process in a clear & concise manner Technical Details Dimensions 127 x 155 x 76 mm (W x H x D) Material Aluminium (fins base) copper (heatpipes) Heatpipes 4x & Oslash; 6 mm Fans 2x 120 mm (max 25 d B (A) 800
- 1800 RPM 9514 m&sup 3;h 16 mm H2O)LED Lighting RGBInput Voltage 12 VStart Voltage 75 VConnector 4-Pin PWMLifespan 40000 h Compatibility Intel Socket 775 115x 1366 2011 2011-V3 2066AMD Socket AM4 AM3 () AM2 () FM2 () FM1
...

Raijintek&s Leto is a heatpipe-based CPU cooler that conceptually takes inspiration from their line up of slim-style coolers This enables the highest possible degree of motherboard compatibility & their respective RAM modules & slots It offers considerable cooling performance given its position in the mid-range This is achieved via the height of the cooler which at 157 mm offers an above average cooler surface area as well as three heatpipes The aluminium heatsink counts among the flattest of its kind & its extensive compatibility is due in no small part to this In cases with limited space available the Themis Leto is ideal with its 5 cm depth The heatsink is designed for the installation of two fans rather than just one This gives it the ability to be upgraded in the future for increased airflow & cooling performance The copper heatpipes utilise Raijintek&s CDC technology to enable direct CPU contact This allows exhaust heat to be transferred away from the processor with even greater effectiveness The elegant in-house design of the fins& heatpipe connection removes the need for the soldering of individual layers instead opting to press them On the one hand this approach minimises the risk of heatpipe damage while increasing its heat transfer efficiency on the other it leads to a notable reduction in its environmental impact as such the Leto can certainly be said to have been manufactured with an eye towards "green IT" The sleek black LED fan with white lighting is a 120 mm model with a 4-pin PWM connector offers a massive maximum airflow of 11383 m 3h This can be regulated by the motherboard which automatically regulates its speed in accordance with performance requirements this also allows the Leto to function extremely quietly when possible as well as providing maximum performance when necessary The fan is attached by means of vibration-dampening pins instead of brackets Four additional pins allow the installation of a further 120 mm fan if required Any current socket along with their respective CPUs can utilise the Leto thanks to its mounting kit The installation is both simple & user friendly while the bundled instruction manual explains the installation process in a clear & concise manner Technical Details Dimensions 122 x 157 x 76 mm (W x H x D) Material Aluminium (fins base) copper (heatpipes) Weight 570 g (without fan) Heatpipes 3x & Oslash; 8 mm Fan 120 mm (max 29 d B (A) 800
- 1800 UMin 11383 m 3h 12 mm H2O)LED Lighting White Input Voltage 12 VStarting Voltage 7 VConnector 4-Pin PWMLifespan 40000 h Compatibility Intel Socket 775 115x 1366 2011 2011-V3 2066AMD Socket AM4 AM3 () AM2 () FM2 () FM1
...

Raijintek PWM fan with addressable RGB LEDs which comes with a high static pressure with low noise in addition to their colourful lighting Thanks to the included RGB hub & remote control the RGB illumination of the Macula 12 Rainbow RGB can be extensively controlled Features- PWM connection for precise speed control via mainboard- On the fan frame mounted decoupler for vibration reduction- Two RGB dispersion rings with individually addressable RGB LEDs-

Includes:: controller hub for a total of 6 fans & remote control- 800
- 1800 rpm speed at <25 d B (A)- 56 cfm airflow & 189 mm H2O air pressure The Macula 12 Rainbow RGB fans The flow-optimized rotor blade design of the Macula fan in conjunction with its high-quality plain bearings ensures smooth running & outstanding performance data at the same time At 1800 rpm the fans generate just 25 d BA & an airflow of over 56 cfm & a high static pressure of 189 mm H2O In addition the fans have vibration-damping inserts in the corners which minimize vibration transmission to the housing & thus contribute to low noise Complex dynamic RGB lighting effects & PWM control The two dispersion rings contain digitally addressable RGB LEDs In conjunction with the included RGB controller hub & the infrared remote control 300 RGB lighting effects can be configured & their speed & intensity controlled The fan speed is controlled as usual via the mainboard via a PWM connection on the controller Technical details Dimensions 120 x 120 x 25 mm (W x H x D) Connection controller 4-pin PWMConnection fan 6 pin PWM RGBSpeed 800
- 1800 rpm Volume max 25 d B (A) Airflow 56 cfm Static pressure max 189 mm H2 O Voltage 12 VPower Consumption 876 WContents- 2x fan- 1x 4-pin PWM Molex adapter- 1x remote control- 1x 6-port controller hub- 8x fan screws



...

Raijintek PWM fan with addressable RGB LEDs which comes with a high static pressure with low noise in addition to their colourful lighting Thanks to the included RGB hub & remote control the RGB illumination of the Macula 12 Rainbow RGB can be extensively controlled Features- PWM connection for precise speed control via mainboard- On the fan frame mounted decoupler for vibration reduction- Three RGB dispersion rings with individually addressable RGB LEDs-

Includes:: controller hub for a total of 6 fans & remote control- 800
- 1800 rpm speed at <25 d B (A)- 56 cfm airflow & 189 mm H2O air pressure The Macula 12 Rainbow RGB fans The flow-optimized rotor blade design of the Macula fan in conjunction with its high-quality plain bearings ensures smooth running & outstanding performance data at the same time At 1800 rpm the fans generate just 25 d BA & an airflow of over 56 cfm & a high static pressure of 189 mm H2O In addition the fans have vibration-damping inserts in the corners which minimize vibration transmission to the housing & thus contribute to low noise Complex dynamic RGB lighting effects & PWM control The two dispersion rings contain digitally addressable RGB LEDs In conjunction with the included RGB controller hub & the infrared remote control 300 RGB lighting effects can be configured & their speed & intensity controlled The fan speed is controlled as usual via the mainboard via a PWM connection on the controller Technical details Dimensions 120 x 120 x 25 mm (W x H x D) Connection controller 4-pin PWMConnection fan 6 pin PWM RGBSpeed 800
- 1800 rpm Volume max 25 d B (A) Airflow 56 cfm Static pressure max 189 mm H2 O Voltage 12 VPower Consumption 876 WContents- 3x fan- 1x 4-pin PWM Molex adapter- 1x remote control- 1x 6-port controller hub- 12x fan screws



...

A cooler change is particularly useful if the factory-installed cooler is too loud or does not provide enough cooling capacity With the Morpheus 8057 provides Raijintek a powerful cooler for graphics cards from NVIDIA & AMD reference design to With its enormous size & the possibility of mounting two large fans it offers the Morpheus 8057 a huge cooling potential The features of the Raijintek Morpheus 8057 heatpipe VGA cooler at a glance- High-performance VGA cooler with copper heat pipes- For NVIDIA Ge Force RTX 2060 to 2080 Ti in reference design- Also for AMD Radeon RX 5600 XT to 5700 XT in reference design- High cooling capacity for up to 360 W TDP- Twelve heat pipes made from copper- Including storage cooler & retaining clips Raijintek Morpheus 8057 Tremendous cooling performance for graphics cards Raijintek equips the Morpheus 8057 with a polished copper base plate which conducts the waste heat from the graphics processor to twelve copper heat pipes These run through the total of 129 aluminum fins of the heat sink To cool additional chips Raijintek

Includes:: three copper heatsinks & eight aluminum heatsinks as well as corresponding heat-conducting pads with the Morpheus 8057 The graphics card cooler is suitable for waste heat of up to 360 watts TDPTwo 120 mm fans can be mounted on the Raijintek Morpheus 8057 The solution for installing a fan is simple Included in delivery are Brackets for 13 & 25 mm fans included Since fans are not included in the scope of delivery there is maximum freedom of choice & the option of implementing practically any configuration from ultra-silent to maximum-OCThe mounting system of the Morpheus is a real highlight This consists of two strips that are screwed to the base plate The Morpheus 8057 is suitable for NVIDIA graphics cards of the type Ge Force RTX 2060 (Super) RTX 2070 (Super) & RTX 2080 (Super Ti) as well as AMD Radeon RX 5600 XT & 5700 (XT) in the reference design For a more stylish look the entire cooler is covered with a black coating Note To install the Morpheus the original cooler must be dismantled which means that the warranty against the graphics card manufacturer is lost The conversion is therefore at your own risk Remnants of thermal paste & pads must be removed very carefully before installation otherwise the passive heat sinks for example could fall off when heated The thermal pads & thermal paste required for assembly are included in the scope of delivery An adapter cable for connecting (PWM) fans to the graphics card is not included in the scope of delivery & must be ordered separately Technical details-

Dimensions (GPU cooler) 254 &215; 100 &215; 44 mm (L x W x H)-

Dimensions (RAM heatsinks)- Type A 85 x 11 x 62 mm (W x H x D)- Type B 50 x 11 x 4 mm (W x H x D)- Type C 50 x 141 x 10 mm (W x H x D)- Type D 37 x 7 x 10 mm (W x H x D)- Type E 59 x 6 x 11 mm (W x H x D)- Weight approx 515 g- Material copper (base plate heat pipes) aluminum (fins)- Heat pipes 12x &216; 6 mm- Heat dissipation capacity max 360 W- Fan (optional) 2x 120 mm Compatibility- AMD Radeon (reference design)- RX 5600 XT- RX 5700 RX 5700 XT- NVIDIA Geforce (reference design)- RTX 2060 RTX 2060 Super- RTX 2070 RTX 2070 Super- RTX 2080 RTX 2080 Super RTX 2080 Ti Contents- 1x Raijintek Morpheus 8057 GPU cooler- 2x RAM heatsink type A (copper)- 1x RAM heatsink type B (copper)- 1x RAM heatsink type C (aluminum)- 1x RAM heatsink type D (aluminum)- 6x RAM heatsink type E (aluminum)- 2x mounting brackets- 1x backplate- 2x rubber pads- 3x thermal pads type A- 2x thermal pads type B- 4x washers- 4x M3 screws- 4x spacers- 4x spring screws- 4x fan clips (25 mm)- 4x fan clips (13 mm)- 1x thermal paste- 1x operating instructions





...