The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting The highlight of the case can be said to be its use of a tinted tempered glass side window that affords users an impressively unobstructed view of their gaming hardware
- while also helping the case as a whole to cut a rather premium figure in comparison to the competition in addition the case offers two pre-installed 120 mm fans that are connected to an integrated controller the speeds of which can be controlled in three stages via a switch on the IO panel THE PHANTEKS ECLIPSE P400A MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal & mesh front section Plenty of space for air- & water cooling Two 120 mm fans pre-installed
Includes: controller for three 3-pin fans 3 speed levels available via IO panel 2x 25 slots &38; 2x 25-35 slots Fits graphics cards up to 420 mm in length PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOWThe PHANTEKS Eclipse P400 Air Midi-Tower offered here comes from PHANTEKS' Eclipse series of cases & its clean lines & ascetic style in black tells you PHANTEKS is pulling no punches in the design department The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to make for a truly premium aesthetic Users will find a convenient reset switch as well as a control for adjusting the fans' speeds located in the indentation between the roof & the upper air inlet in the front The power switch is located towards the front of the case in the centre of the case's roof both audio jacks & USB (Universal Serial Bus) 30 ports are located on the side of the front panel facing to the right A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Hook & loop fastener cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the two pre-installed 120 mm fans on the front up to two 120- or 140 mm fans can be mounted in the roof along QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 2x 120 mm (front) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button 1x Fan controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm



...

The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting An additional visual highlight of the case

Includes:: the three pre-installed RGB-LED fans the lighting of which is controlled via an integrated controller & two switches located on the IO panel Alternatively the lighting can be adjusted using a compatible motherboard either from ASUS ASRock Gigabyte MSI or using Razer's Chroma software Users will also be pleased to note the inclusion of the tinted- as well as tempered glass side window allowing for a panoramic view of their hard-earned gaming hardware & elevating the look of the case as a whole THE PHANTEKS ECLIPSE P400 AIR MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal front Plenty of space for air- or water cooling Three RGB-LED 120 mm fans pre-installed 2x 25 slots &38; 2x 25-35 slots Supports graphics cards up to 420 mm in length Compatible with ASUS AURA Sync ASRock Polychrome Sync Gigabyte Fusion Razer Chroma &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW INSULATION &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Air Midi-Tower from PHANTEKS' series of cases offers clean lines & an ascetic style in black The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to give the case a high-end look which is then emphasised with the LED lighting of the three pre-installed 120 mm fans at the front Users will find a convenient reset switch & both LED controllers located in the indentation between the roof & the upper air inlet in the front In the centre of the case towards the front users will find a power button that even offers a backlit RGB-LED while audio jacks & USB (Universal Serial Bus) 30 ports on the front panel are also included A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Velcro cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the three pre-installed 120 mm fans on the front either two 120- or 140 mm case fans can be installed in the roof & a 120 mm fan mounted at the back QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length The LED lighting of the fans can be connected to the case's integrated LED controller The two switches at the front allow users to select from several lighting modes & colours Alternatively the lighting can be controlled via motherboard using a compatible RGB connector The lighting can be controlled using ASRock Polychrome Sync Gigabyte RGB Fusion ASUS Aura or MSI Mystic Light Sync & even Razer's Chroma software meaning that the motherboard's lighting can be coordinated in conjunction with the case's lighting
- meaning your whole gaming PC can benefit from your exact choice of lighting & LED effects With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 3x 120 mm (front with RGB-LED lighting) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button (with RGB-LED)2x LED controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm




...

The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting An additional visual highlight of the case

Includes:: the three pre-installed RGB-LED fans the lighting of which is controlled via an integrated controller & two switches located on the IO panel Alternatively the lighting can be adjusted using a compatible motherboard either from ASUS ASRock Gigabyte MSI or using Razer's Chroma software Users will also be pleased to note the inclusion of the tinted- as well as tempered glass side window allowing for a panoramic view of their hard-earned gaming hardware & elevating the look of the case as a whole THE PHANTEKS ECLIPSE P400 AIR MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal front Plenty of space for air- or water cooling Three RGB-LED 120 mm fans pre-installed 2x 25 slots &38; 2x 25-35 slots Supports graphics cards up to 420 mm in length Compatible with ASUS AURA Sync ASRock Polychrome Sync Gigabyte Fusion Razer Chroma &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW INSULATION &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Air Midi-Tower from PHANTEKS' series of cases offers clean lines & an ascetic style in white & black The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to give the case a high-end look which is then emphasised with the LED lighting of the three pre-installed 120 mm fans at the front Users will find a convenient reset switch & both LED controllers located in the indentation between the roof & the upper air inlet in the front In the centre of the case towards the front users will find a power button that even offers a backlit RGB-LED while audio jacks & USB (Universal Serial Bus) 30 ports on the front panel are also included A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Velcro cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the three pre-installed 120 mm fans on the front either two 120- or 140 mm case fans can be installed in the roof & a 120 mm fan mounted at the back QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length The LED lighting of the fans can be connected to the case's integrated LED controller The two switches at the front allow users to select from several lighting modes & colours Alternatively the lighting can be controlled via motherboard using a compatible RGB connector The lighting can be controlled using ASRock Polychrome Sync Gigabyte RGB Fusion ASUS Aura or MSI Mystic Light Sync & even Razer's Chroma software meaning that the motherboard's lighting can be coordinated in conjunction with the case's lighting
- meaning your whole gaming PC can benefit from your exact choice of lighting & LED effects With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour White (exterior) Black (interior) Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 3x 120 mm (front with RGB-LED lighting) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button (with RGB-LED)2x LED controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm




...

The cases of the Eclipse P400 series have been developed with beginners in mind while simultaneously offering plenty of interesting features for experienced enthusiasts in the world of PC building With an RGB-LED illuminated power button as well as an Ambient Down Light an LED strip on the lower section of the front of the case the Netherlands-based manufacturer really know how to make a vibrant & colourful case! The special feature of this version of the Eclipse P400 is without doubt the modern side window manufactured from hardened & tinted real glass enabling users to enjoy an unobstructed view of their high-end gaming hardware & making the whole system look just that bit more premium THE PHANTEKS ECLIPSE P400 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATX form factor Plenty of space for air- or watercooling Two 120 mm fans come preinstalled 2x 25 slots &38; 2x 25-35 slots Graphics cards up to 395 mm long Compatible with ASUS AURA Sync &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Midi-Tower offered here is from the PHANTEKS Eclipse series of cases offering superb aesthetics with clean lines & a premium yet also reserved design in in Black White The unibody front panel as well as the large tinted glass side window lends the case a very high-end look & the overall effect is only added to with the complementary external LED lighting on the bottom of the front section The LED-illuminated PHANTEKS logo beneath the air inlet lends the Midi-Tower that certain je ne sais quoi & the fins on the top of the front which also serve to improve ventilation offer a welcome contrast to the sleek clean lines of the front panel On the edge between the front & the roof are located the reset switch & the LED controls which are positioned in the groove between the roof & the upper air inlet in the front Located in the middle in the front of the lid lies the RGB-LED backlit power button while both audio connections & the USB (Universal Serial Bus) 30 ports of the front panel are positioned on the side to the right The majority of the roof is taken up by a large removable dust filter that has the appearance of a large mesh grid on a large grill MIDI-TOWER CASE FOR GAMING GRAPHICS CARDS &38; AIO WATERCOOLINGEven the interior of the black-white Eclipse P400 looks premium thanks to the black paintwork & is divided in two via a PSU shroud with ventilation holes in the top This way the PSU shroud also covers both drive bays which are rotated 90&176; & made for tool-free mounting of two 25 or 35 drives via the right side after removing the thumb screws Behind the motherboard tray users can install up to two SSDs in the Drop-N-Lock SSD brackets & for cable management there is 25 mm of space reserved Velcro cable guides enable users to enjoy the cleanest & tidiest system possible & the rubberised passthroughs in the tray also help keep the messy cabling down to a minimum For casual & hardcore gamers alike the PHANTEKS Eclipse P400 offers extensive build options when it comes to high-end gamer hardware in the form of graphics cards up to 395 mm in length & radiator mountings for Ai O- & custom watercooling Moreover the case offers the option of installing a 120 mm fan in the rear or correspondingly sized radiator while the front holds up to three 120 mmor two 140 mm fans As an alternative to the front fans 280- or 360 radiators can be installed in the front When it comes to installing 360 mm radiators a cover in the PSU shroud along with the HDD cages need to be removed Apart from the pre-installed 120 mm fans one of which is situated in the front & one in the back up to two 120 mm or 140 mm case fans can be mounted in the roof Those wishing to utilise a standard style CPU cooler on their processor are able to choose models that are up to 16 cm in height while a power supply up to 270 mm in length can be used to power the gaming system The LED lighting is powered via a SATA cable with 12 Volts & a 4-pin connector enables the case's LED lighting to be connected to a motherboard with a compatible RGB connector With the aid of accessories (available separately) users can trade a few millimetres of the max length of their graphics card & the option of a radiator in the front to have up to four additional 35- or 25 storage devices Furthermore the case is compatible with ASUS Aura or MSI Mystic Light meaning that the motherboard's lighting can be controlled to synchronise with the case's lighting meaning that your entire gaming PC is able to be beautifully illuminated with the same LED effects Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black White Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 1x 120 mm (front)1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button (with RGB-LED)1x LED controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU length 395 mm Maximum CPU cooler height 160 mm Maximum PSU length 270 mm ...

The cases of the Eclipse P400 series have been developed with beginners in mind while simultaneously offering plenty of interesting features for experienced enthusiasts in the world of PC building With an RGB-LED illuminated power button as well as an Ambient Down Light an LED strip on the lower section of the front of the case the Netherlands-based manufacturer really know how to make a vibrant & colourful case! The special feature of this version of the Eclipse P400 is without doubt the modern side window manufactured from hardened & tinted real glass enabling users to enjoy an unobstructed view of their high-end gaming hardware & making the whole system look just that bit more premium THE PHANTEKS ECLIPSE P400 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATX form factor Plenty of space for air- or watercooling Two 120 mm fans come preinstalled 2x 25 slots &38; 2x 25-35 slots Graphics cards up to 395 mm long Compatible with ASUS AURA Sync &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Midi-Tower offered here is from the PHANTEKS Eclipse series of cases offering superb aesthetics with clean lines & a premium yet also reserved design in anthracite grey The unibody front panel as well as the large tinted glass side window lends the case a very high-end look & the overall effect is only added to with the complementary external LED lighting on the bottom of the front section The LED-illuminated PHANTEKS logo beneath the air inlet lends the Midi-Tower that certain je ne sais quoi & the fins on the top of the front which also serve to improve ventilation offer a welcome contrast to the sleek clean lines of the front panel On the edge between the front & the roof are located the reset switch & the LED controls which are positioned in the groove between the roof & the upper air inlet in the front Located in the middle in the front of the lid lies the RGB-LED backlit power button while both audio connections & the USB (Universal Serial Bus) 30 ports of the front panel are positioned on the side to the right The majority of the roof is taken up by a large removable dust filter that has the appearance of a large mesh grid on a large grill MEDIUM CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the interior of the anthracite-coloured Eclipse P400 looks premium thanks to the black paintwork & is divided in two via a PSU shroud with ventilation holes in the top This way the PSU shroud also covers both drive bays which are rotated 90&176; & made for tool-free mounting of two 25 or 35 drives via the right side after removing the thumb screws Behind the motherboard tray users can install up to two SSDs in the Drop-N-Lock SSD brackets & for cable management there is 25 mm of space reserved Hook & loop fastener cable guides enable users to enjoy the cleanest & tidiest system possible & the rubberised passthroughs in the tray also help keep the messy cabling down to a minimum For casual & hardcore gamers alike the PHANTEKS Eclipse P400 offers extensive build options when it comes to high-end gamer hardware in the form of graphics cards up to 395 mm in length & radiator mountings for Ai O- & custom watercooling Moreover the case offers the option of installing a 120 mm fan in the rear or correspondingly sized radiator while the front holds up to three 120 mmor two 140 mm fans As an alternative to the front fans 280- or 360 radiators can be installed in the front When it comes to installing 360 mm radiators a cover in the PSU shroud along with the HDD cages need to be removed Apart from the pre-installed 120 mm fans one of which is situated in the front & one in the back up to two 120 mm or 140 mm case fans can be mounted in the roof Those wishing to utilise a standard style CPU cooler on their processor are able to choose models that are up to 16 cm in height while a power supply up to 270 mm in length can be used to power the gaming system The LED lighting is powered via a SATA cable with 12 Volts & a 4-pin connector enables the case's LED lighting to be connected to a motherboard with a compatible RGB connector With the aid of accessories (available separately) users can trade a few millimetres of the max length of their graphics card & the option of a radiator in the front to have up to four additional 35- or 25 storage devices Furthermore the case is compatible with ASUS Aura or MSI Mystic Light meaning that the motherboard's lighting can be controlled to synchronise with the case's lighting meaning that your entire gaming PC is able to be beautifully illuminated with the same LED effects Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Anthracite Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 1x 120 mm (front)1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button (with RGB-LED)1x LED controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU length 395 mm Maximum CPU cooler height 160 mm Maximum PSU length 270 mm ...

Change your P400 Windowed P400S Windowed or P400S Glass into a solid side panelled case using the P400 Closed side panel Can be fitted to the left or right panel dependant on preference Features- Solid Side Panel for P400 Series- Fits on P400P400SP400S Glass models ...

PHANTEKS' Eclipse P400A Midi-Tower represents a stylish yet purposeful addition to the front of the case This takes the form of a premium super durable metal panel complete with a fine mesh which on the one hand provides excellent airflow & on the other also helps keep dust out of the case This metal mesh front panel for the Eclipse P400A is designed as a replacement panel for example in instances where damage has occurred Since the case & the replacement panel comes in white & in black this does also offer users the chance to switch things up on the colour front & create your own combinations The Metal Mesh Front Panel is first & foremost designed for use on the Eclipse P400A it can however also be used on the Eclipse P400 to help provide enhanced airflow What needs to be taken into account here however is that the replacement front panel cannot be centred precisely in the middle on the Eclipse P400 (See Images) Technical Details Dimensions 210 x 453 x 44 mm (W x H x D) Material Metal Colour Black Compatibility PHANTEKS Eclipse P400APHANTEKS Eclipse P400 (not 100 exact fit!)PHANTEKS Eclipse P400S (not 100 exact fit!) ...

Description below is for brand new sealed products & may not represent the item fully Images are for illustration only Contents & item condition may vary All items are sold in working condition Instruction manuals guides downloadable or online accessible content listed on the product are not guaranteed to be included PHANTEKS' Eclipse P400A Midi-Tower represents a stylish yet purposeful addition to the front of the case This takes the form of a premium super durable metal panel complete with a fine mesh which on the one hand provides excellent airflow & on the other also helps keep dust out of the case This metal mesh front panel for the Eclipse P400A is designed as a replacement panel for example in instances where damage has occurred Since the case & the replacement panel comes in white & in black this does also offer users the chance to switch things up on the colour front & create your own combinations The Metal Mesh Front Panel is first & foremost designed for use on the Eclipse P400A it can however also be used on the Eclipse P400 to help provide enhanced airflow What needs to be taken into account here however is that the replacement front panel cannot be centred precisely in the middle on the Eclipse P400 (See Images) Technical Details Dimensions 210 x 453 x 44 mm (W x H x D) Material Metal Colour Black Compatibility PHANTEKS Eclipse P400APHANTEKS Eclipse P400 (not 100 exact fit!)PHANTEKS Eclipse P400S (not 100 exact fit!) ...

PHANTEKS' Eclipse P400A Midi-Tower represents a stylish yet purposeful addition to the front of the case This takes the form of a premium super durable metal panel complete with a fine mesh which on the one hand provides excellent airflow & on the other also helps keep dust out of the case This metal mesh front panel for the Eclipse P400A is designed as a replacement panel for example in instances where damage has occurred Since the case & the replacement panel comes in white & in black this does also offer users the chance to switch things up on the colour front & create your own combinations The Metal Mesh Front Panel is first & foremost designed for use on the Eclipse P400A it can however also be used on the Eclipse P400 to help provide enhanced airflow What needs to be taken into account here however is that the replacement front panel cannot be centred precisely in the middle on the Eclipse P400 (See Images) Technical Details Dimensions 210 x 453 x 44 mm (W x H x D) Material Metal Colour White Compatibility PHANTEKS Eclipse P400APHANTEKS Eclipse P400 (not 100 exact fit!)PHANTEKS Eclipse P400S (not 100 exact fit!) ...

Phanteks&8217; budget-friendly Eclipse P400S now sports an all new tempered glass side panel The new variant of the Eclipse Series still features the solid build quality built-in RGB lighting controller open interior design compatibility with all-in-one liquid cooling The P400S retains the 3 speed fan controller & noise deadening material for a more silent build The tempered glass side panel of the Eclipse P400S offers elegance & style to your system build The Phanteks Eclipse P400S can support 360mm radiators 395mm VGA cards 160mm CPU coolers & up to 270mm PSU's for impressive compatibility with enthusiast level hardware The Phanteks Eclipse range are also fully compatible with the new Asus Aura RGB motherboard range & through use of the Phanteks RGB LED adapter cable (sold separately) it can be synchronised with the Aura software to control both interior & exterior RGB functionality The Phanteks Eclipse P400S range represents outstanding value for your money combining a host of attractive features with a extremely well built & aesthetically pleasing structure at a pricepoint that commands attention FEATURES- Full Metal Body- Tempered Glass Side Panel- 300mm Phanteks RGB LED Strip Included- Clean interior
- Featuring a PSU shroud- Soundproofing Panels Top Covers- Fully equipped with dust filters- Ready for AIO Watercooling
- Supports up to 360mm radiators
- Equipped with 2 x 120mm fans- 25 mm cable management space additional cable compartment in bottom along with Phanteks Hook & loop fastener cable ties- Front IO (Hidden)
- 2 x USB30 Headphone Mic LED Control Reset 3-Speed Fan Controller- RGB Power Light Ambient Down Light choose from 10 different colours compatible with Phanteks RGB LED Strips

Specification- Dimension 210 mm x 465 mm x 470 mm (W x H x D) 83 in x 183 in x 185 in- Form Factor Midtower- Material (s) Steel chassis steel exterior ABS Tempered Glass side panel- Colour Black- Motherboard support ATX Micro ATX Mini ITX E-ATX (up to 272mm wide cannot use rubber grommets)- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset RGB LED control- Side window Yes- Soundproofing Panels Yes Front Top Right Side- Expansion slots 7- Internal 35 6x (2x included)- Internal (dedicated) 25” 2x (2x included)- Cooling Front
- 120mm Fan x 3 (1 included) 140mm Fan x 2 Top
- 120mm Fan x 2 140mm Fan x 2 Rear
- 120mm Fan x 1 (included)- Liquid Cooling Front
- Up to 360mm (with removal of midplate cover) or 280mm (without removal) Rear
- 120mm- GPU Clearance 395mm 280mm (with optional HDD brackets installed)- CPU Cooler 160mm- Cable Management 25mm- PSU (including cable) 270mm- Model PH-EC416PSTGBK- Net Weight 7kg (154 lbs)- Gross Weight 8kg (176 lbs)- Package Dimension 300 mm x 555 mm x 520 mm (Wx Hx D) 118 in x 219 in x 205 in- Warranty 5 Years










...