The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black White Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Velcro cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour White Black Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse Series' P350X from Phanteks is targeted at new arrivals to the world of PC building while also offering a variety of ingenious features for experienced PC enthusiasts Equipped with RGB-LED strips along the front panel & an additional strip along the side panel beneath the tempered glass window the case provides the vibrant colours & highlights that we've come to expect from the Dutch manufacturer over the years! When compared to its smaller siblings in the P300 series rather than growing taller the P350X has expanded towards the back This drastically expands users' options for installing cooling & the support for motherboards up to E-ATX in size is also a welcome addition The upper area of this attractive case also comes complete with tempered glass which enables an unobstructed view of the tidy interior as well as your chosen hardware The lower section also serves as an inbuilt shroud for the power supply THE ECLIPSE P350X MIDI-TOWER FROM PHANTEKS AT A GLANCEStylish Midi-style case with tempered glass side panel Compatible with E-ATX motherboards (up to 280 mm) Plenty of space for fans & radiators 3x 25 slots &38; 2x 25-35 slots Graphics cards up to 40 cm long Striking front complete with side-facing air inlets & RGB-LED lighting IMPROVED AIRFLOW & PLENTY OF SPACE FOR HARDWAREThe black Eclipse P350X Midi-Tower with white interior from Phanteks' Eclipse series offers a premium-looking & pleasantly reserved aesthetic with plenty of clean lines The smooth uninterrupted lines of the front panel lend the case a high-end look that is off-set by the addition of RGB-LED lighting The side-facing air inlets have been expanded in this version making them somewhat larger than those of the P300 They also come equipped with dust covers All in all while they make a noticeable improvement in terms of airflow they also add a certain something to the case's overall appearance as well The IO panel is located towards the front of the case along the upper edge with a power switch located in the centre that also serves as the reset button Two switches for controlling RGB modes & speeds are located next to this The digitally addressable RGB-LED strips can also be if you prefer connected directly to the motherboard by means of the 3-pin connector Both audio jacks are located just behind these along with both USB (Universal Serial Bus) 30 ports The majority of the case's roof is covered by a large removable magnetic dust filter that has the appearance of a large mesh grid One of the case's large air flow inlets is located beneath this PLENTY OF SPACE FOR FANS & RADIATORSThe interior of this version of the Eclipse P350X is exceptionally easy on the eye thanks to the white paintwork & the power supply's shroud also functions to break up the interior into two sections This enables the PSU shroud to also cover both drive bays which themselves allow for tool-free installation of up to two 35 HDDs via the front Installation of course requires the front first be removed Up to two SSDs can be installed into Drop-N-Lock-style SSD brackets behind the motherboard tray There is also space for an optional third bracket The case offers a generous 36 mm of space for cable management Hook & loop fastener cable guides also help to make keeping the interior nice & tidy a breeze Casual- & hardcore gamers enjoy a range of options when it comes to high-end gaming hardware in the Phanteks Eclipse P350X with support for graphics cards up to 400 mm in length as well as radiator mountings for Ai O water coolers & custom cooling As such the rear of the case offers space for a 120 mm fan or a similarly proportioned radiator while the front sets aside space for two 120 mm- or 140 mm fans As an alternative to front-facing fans users are also free to install 240 mm- or 280 mm radiators in the front Apart from the pre-installed 120 mm front-facing fan up to two 120 mm or 140 mm case fans may be installed in the roof of the case Those preferring to equip their processor with standard-style CPU cooling are well catered for with compatibility for coolers up to 16 cm in height while power supplies up to 240 mm long can also be installed to ensure your gaming system is supplied with all the necessary power A further dust filter is to be found beneath the PSU Technical Details Dimensions 200 x 450 x 455 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black (case) White (interior) Form Factor E-ATX (up to 280 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140120 mm (Front)2x 140120 mm (Top)1x 120 mm (Rear) Pre-Installed Fans 1x 120 mm (Front) Radiator Mountings (forfeits HDD- andor fan slots)1x max 240280 mm (Front)1x max 120 mm (Rear) Filter Front PSU Top (removable) Drive Bays 3x 25 (internal; tool-free installation)2x 35 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button 1x RGB-LED Controller (mode)1x RGB-LED Controller (speed)2x USB (Universal Serial Bus) 302x Audio Maximum Graphics Card Length 400 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 240 mm ...

ECLIPSE P360 AIR MID TOWER CASE TEMPERED GLASS DRGB
- SATIN BLACKs P360A is the newest member of the Elispe line of PC cases It
...

The Phanteks P360A is the newest member of the Elispe line of PC cases It sits squarely between the previous P300 & the even larger P400A with the P360A offer enough space for a full E-ATX motherboard as two bundled D-RGB 120mm PWM Fans THE PHANTEKS P360A AT A GLANCEUltra-Fine mesh front panel Supports up to E-ATX motherboards Two bundled D-RGB 120mm PWM fans Vertical mounting of GPU possible with separate bracket THE PHANTEKS P360A IN DETAILThe P360A has been optimised for airflow & can therefore help your PC system run at full capacity This is achieved via a mesh front panel & space for a maximum of five 120mm fans Of course if you want to use water cooling there is also the option to mount a 240280mm radiator on the frunt another 240mm one on the case's roof & a 120mm radiator on the back There is also an abundance of space for the components of your build For instance there are two 35&8243; & three 25&8243; drive bays As well as room for a GPU of up to 400mm & a CPU cooler up to 160mm IMPRESSIVE DESIGNAesthetically the P360A is equally outstanding Coming in a fresh white colour the case has a distinct minimalistic look which looks great when paired with RGB illumination Phanteks themselves include two 120mm PWM fans that feature RGB illumination These can be synced with other RGB LED elements via a separate Phanteks controller with he option then to control the LEDs via RGB-Mode & RGB-Colour button on the IO panel Alternatively illumination can be controlled directly via the motherboard Meanwhile a tempered glass side panel enables users to display any components they have installed in their P360ASPECIFICATIONCase Dimension (Wx Hx D) 455 mm x 200 mm x 465 mm 179 in x 787 in x 183 in Form Factor Mid Tower Materials Steel Chassis Tempered Glass Colour White Motherboard Support E-ATX (up to 280mm wide) ATX micro-ATX mini-ITXFront IO 2x USB (Universal Serial Bus) 30 Microphone Headphone D-RGB Mode D-RGB Color Power Button Connectors Power Switch HD-audio Power-LEDUSB 30 Side Window Tempered Glass Window PCI Slots 7 Vertical GPU ready Yes Internal 35&8243;bay 2 (2x included) Internal 25&8243;bay 3 (2x included) Total Fan Mounts 5 x 120mm 4 x 140mm 1 x 120mm Front Fan 2 x 120mm 2 x 140mm (2 x 120mm D-RGB included) Top Fan 2 x 120mm 2 x 140mm Rear Fan 1 x 120mm Dust Filters Top Bottom PSUFront Radiator Up to 240 280 mm Top Radiator Up to 240mm -Rear Radiator 120mm-Front Radiator Clearance 122142 x 315mm Top Radiator Clearance Max motherboard component height is 38mm GPU Length 400 mm 157 in CPU Cooler Height 160 mm 63 in Motherboard Width Up to 280 mm PSU Length 250 mm Cable Management 36 mm 14 in Net Weight 67kg 148 lbs ...

The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting The highlight of the case can be said to be its use of a tinted tempered glass side window that affords users an impressively unobstructed view of their gaming hardware
- while also helping the case as a whole to cut a rather premium figure in comparison to the competition in addition the case offers two pre-installed 120 mm fans that are connected to an integrated controller the speeds of which can be controlled in three stages via a switch on the IO panel THE PHANTEKS ECLIPSE P400A MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal & mesh front section Plenty of space for air- & water cooling Two 120 mm fans pre-installed
Includes: controller for three 3-pin fans 3 speed levels available via IO panel 2x 25 slots &38; 2x 25-35 slots Fits graphics cards up to 420 mm in length PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOWThe PHANTEKS Eclipse P400 Air Midi-Tower offered here comes from PHANTEKS' Eclipse series of cases & its clean lines & ascetic style in black tells you PHANTEKS is pulling no punches in the design department The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to make for a truly premium aesthetic Users will find a convenient reset switch as well as a control for adjusting the fans' speeds located in the indentation between the roof & the upper air inlet in the front The power switch is located towards the front of the case in the centre of the case's roof both audio jacks & USB (Universal Serial Bus) 30 ports are located on the side of the front panel facing to the right A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Hook & loop fastener cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the two pre-installed 120 mm fans on the front up to two 120- or 140 mm fans can be mounted in the roof along QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 2x 120 mm (front) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button 1x Fan controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm



...

The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting An additional visual highlight of the case

Includes:: the three pre-installed RGB-LED fans the lighting of which is controlled via an integrated controller & two switches located on the IO panel Alternatively the lighting can be adjusted using a compatible motherboard either from ASUS ASRock Gigabyte MSI or using Razer's Chroma software Users will also be pleased to note the inclusion of the tinted- as well as tempered glass side window allowing for a panoramic view of their hard-earned gaming hardware & elevating the look of the case as a whole THE PHANTEKS ECLIPSE P400 AIR MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal front Plenty of space for air- or water cooling Three RGB-LED 120 mm fans pre-installed 2x 25 slots &38; 2x 25-35 slots Supports graphics cards up to 420 mm in length Compatible with ASUS AURA Sync ASRock Polychrome Sync Gigabyte Fusion Razer Chroma &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW INSULATION &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Air Midi-Tower from PHANTEKS' series of cases offers clean lines & an ascetic style in black The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to give the case a high-end look which is then emphasised with the LED lighting of the three pre-installed 120 mm fans at the front Users will find a convenient reset switch & both LED controllers located in the indentation between the roof & the upper air inlet in the front In the centre of the case towards the front users will find a power button that even offers a backlit RGB-LED while audio jacks & USB (Universal Serial Bus) 30 ports on the front panel are also included A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Velcro cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the three pre-installed 120 mm fans on the front either two 120- or 140 mm case fans can be installed in the roof & a 120 mm fan mounted at the back QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length The LED lighting of the fans can be connected to the case's integrated LED controller The two switches at the front allow users to select from several lighting modes & colours Alternatively the lighting can be controlled via motherboard using a compatible RGB connector The lighting can be controlled using ASRock Polychrome Sync Gigabyte RGB Fusion ASUS Aura or MSI Mystic Light Sync & even Razer's Chroma software meaning that the motherboard's lighting can be coordinated in conjunction with the case's lighting
- meaning your whole gaming PC can benefit from your exact choice of lighting & LED effects With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 3x 120 mm (front with RGB-LED lighting) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button (with RGB-LED)2x LED controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm




...

The cases of the Eclipse P400 Air series are designed with beginners in mind while still catering for the experienced PC enthusiast crowd with an array of interesting features including despite its sleek profile optimised airflow The front of the Eclipse P400 Air consists of a metal plate with a fine mesh grid which allows excellent airflow on one hand while also allowing users to keep the interior of the case free of dust When compared to the usual combination of mesh & dust filters the advantage here lies in the fact that the fans situated behind the front panel are able to pull in air more easily This durable mesh also happens to add a certain something to the overall look of the case
- especially when the interior of the case is illuminated with RGB lighting An additional visual highlight of the case

Includes:: the three pre-installed RGB-LED fans the lighting of which is controlled via an integrated controller & two switches located on the IO panel Alternatively the lighting can be adjusted using a compatible motherboard either from ASUS ASRock Gigabyte MSI or using Razer's Chroma software Users will also be pleased to note the inclusion of the tinted- as well as tempered glass side window allowing for a panoramic view of their hard-earned gaming hardware & elevating the look of the case as a whole THE PHANTEKS ECLIPSE P400 AIR MIDI-TOWER AT A GLANCEPremium Midi-Tower with tempered glass side panel Compatible with motherboards up to E-ATXMetal front Plenty of space for air- or water cooling Three RGB-LED 120 mm fans pre-installed 2x 25 slots &38; 2x 25-35 slots Supports graphics cards up to 420 mm in length Compatible with ASUS AURA Sync ASRock Polychrome Sync Gigabyte Fusion Razer Chroma &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW INSULATION &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Air Midi-Tower from PHANTEKS' series of cases offers clean lines & an ascetic style in white & black The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to give the case a high-end look which is then emphasised with the LED lighting of the three pre-installed 120 mm fans at the front Users will find a convenient reset switch & both LED controllers located in the indentation between the roof & the upper air inlet in the front In the centre of the case towards the front users will find a power button that even offers a backlit RGB-LED while audio jacks & USB (Universal Serial Bus) 30 ports on the front panel are also included A large removable dust filter which acts like a large mesh grille & rests on a large vent takes up the majority of the lid MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGThe interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top The presence of this PSU shroud helps conceal both drive bays which in turn allow for tool-free mounting of two 35- or 25 drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws Up to two SSDs can be installed to the rear of the motherboard with Drop-N-Lock SSD brackets & PHANTEKS also factored in convenient cable management
- reserving 25 mm of space here for said purpose Velcro cable ties enable users to neatly route their cabling & the presence of rubberised pass-throughs help to keep said cables in top condition The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware graphics cards up to 420 mm in length are supported with radiator mounts for Ai O & custom water cooling solutions The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer while the front supports three 120 mm fans or two 140 mm fans Instead of fans if you prefer the case will also support 280- or 360 mm radiators in the front If users wish to install a 360 mm radiator however a panel in the PSU shroud as well as the HDD cage must be removed In addition to the three pre-installed 120 mm fans on the front either two 120- or 140 mm case fans can be installed in the roof & a 120 mm fan mounted at the back QUALITY LIGHTINGThose wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height while your gaming system is free to use power supplies up to 270 mm in length The LED lighting of the fans can be connected to the case's integrated LED controller The two switches at the front allow users to select from several lighting modes & colours Alternatively the lighting can be controlled via motherboard using a compatible RGB connector The lighting can be controlled using ASRock Polychrome Sync Gigabyte RGB Fusion ASUS Aura or MSI Mystic Light Sync & even Razer's Chroma software meaning that the motherboard's lighting can be coordinated in conjunction with the case's lighting
- meaning your whole gaming PC can benefit from your exact choice of lighting & LED effects With the help of the accessories (available separately) users can forfeit the additional space for the GPU or radiator in the front & opt instead for up to four additional 35-25 drives There's even the possibility of installing the graphics card in a vertical orientation Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour White (exterior) Black (interior) Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 3x 120 mm (front with RGB-LED lighting) Radiator Mountings (forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power button (with RGB-LED)2x LED controller 2x USB (Universal Serial Bus) 302x Audio Max GPU length 420 mm Max CPU cooler height 160 mm Max PSU length 270 mm




...

The cases of the Eclipse P400 series have been developed with beginners in mind while simultaneously offering plenty of interesting features for experienced enthusiasts in the world of PC building With an RGB-LED illuminated power button as well as an Ambient Down Light an LED strip on the lower section of the front of the case the Netherlands-based manufacturer really know how to make a vibrant & colourful case! The special feature of this version of the Eclipse P400 is without doubt the modern side window manufactured from hardened & tinted real glass enabling users to enjoy an unobstructed view of their high-end gaming hardware & making the whole system look just that bit more premium THE PHANTEKS ECLIPSE P400 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATX form factor Plenty of space for air- or watercooling Two 120 mm fans come preinstalled 2x 25 slots &38; 2x 25-35 slots Graphics cards up to 395 mm long Compatible with ASUS AURA Sync &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Midi-Tower offered here is from the PHANTEKS Eclipse series of cases offering superb aesthetics with clean lines & a premium yet also reserved design in in Black White The unibody front panel as well as the large tinted glass side window lends the case a very high-end look & the overall effect is only added to with the complementary external LED lighting on the bottom of the front section The LED-illuminated PHANTEKS logo beneath the air inlet lends the Midi-Tower that certain je ne sais quoi & the fins on the top of the front which also serve to improve ventilation offer a welcome contrast to the sleek clean lines of the front panel On the edge between the front & the roof are located the reset switch & the LED controls which are positioned in the groove between the roof & the upper air inlet in the front Located in the middle in the front of the lid lies the RGB-LED backlit power button while both audio connections & the USB (Universal Serial Bus) 30 ports of the front panel are positioned on the side to the right The majority of the roof is taken up by a large removable dust filter that has the appearance of a large mesh grid on a large grill MIDI-TOWER CASE FOR GAMING GRAPHICS CARDS &38; AIO WATERCOOLINGEven the interior of the black-white Eclipse P400 looks premium thanks to the black paintwork & is divided in two via a PSU shroud with ventilation holes in the top This way the PSU shroud also covers both drive bays which are rotated 90&176; & made for tool-free mounting of two 25 or 35 drives via the right side after removing the thumb screws Behind the motherboard tray users can install up to two SSDs in the Drop-N-Lock SSD brackets & for cable management there is 25 mm of space reserved Velcro cable guides enable users to enjoy the cleanest & tidiest system possible & the rubberised passthroughs in the tray also help keep the messy cabling down to a minimum For casual & hardcore gamers alike the PHANTEKS Eclipse P400 offers extensive build options when it comes to high-end gamer hardware in the form of graphics cards up to 395 mm in length & radiator mountings for Ai O- & custom watercooling Moreover the case offers the option of installing a 120 mm fan in the rear or correspondingly sized radiator while the front holds up to three 120 mmor two 140 mm fans As an alternative to the front fans 280- or 360 radiators can be installed in the front When it comes to installing 360 mm radiators a cover in the PSU shroud along with the HDD cages need to be removed Apart from the pre-installed 120 mm fans one of which is situated in the front & one in the back up to two 120 mm or 140 mm case fans can be mounted in the roof Those wishing to utilise a standard style CPU cooler on their processor are able to choose models that are up to 16 cm in height while a power supply up to 270 mm in length can be used to power the gaming system The LED lighting is powered via a SATA cable with 12 Volts & a 4-pin connector enables the case's LED lighting to be connected to a motherboard with a compatible RGB connector With the aid of accessories (available separately) users can trade a few millimetres of the max length of their graphics card & the option of a radiator in the front to have up to four additional 35- or 25 storage devices Furthermore the case is compatible with ASUS Aura or MSI Mystic Light meaning that the motherboard's lighting can be controlled to synchronise with the case's lighting meaning that your entire gaming PC is able to be beautifully illuminated with the same LED effects Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black White Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 1x 120 mm (front)1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button (with RGB-LED)1x LED controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU length 395 mm Maximum CPU cooler height 160 mm Maximum PSU length 270 mm ...

The cases of the Eclipse P400 series have been developed with beginners in mind while simultaneously offering plenty of interesting features for experienced enthusiasts in the world of PC building With an RGB-LED illuminated power button as well as an Ambient Down Light an LED strip on the lower section of the front of the case the Netherlands-based manufacturer really know how to make a vibrant & colourful case! The special feature of this version of the Eclipse P400 is without doubt the modern side window manufactured from hardened & tinted real glass enabling users to enjoy an unobstructed view of their high-end gaming hardware & making the whole system look just that bit more premium THE PHANTEKS ECLIPSE P400 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATX form factor Plenty of space for air- or watercooling Two 120 mm fans come preinstalled 2x 25 slots &38; 2x 25-35 slots Graphics cards up to 395 mm long Compatible with ASUS AURA Sync &38; MSI Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe PHANTEKS Eclipse P400 Midi-Tower offered here is from the PHANTEKS Eclipse series of cases offering superb aesthetics with clean lines & a premium yet also reserved design in anthracite grey The unibody front panel as well as the large tinted glass side window lends the case a very high-end look & the overall effect is only added to with the complementary external LED lighting on the bottom of the front section The LED-illuminated PHANTEKS logo beneath the air inlet lends the Midi-Tower that certain je ne sais quoi & the fins on the top of the front which also serve to improve ventilation offer a welcome contrast to the sleek clean lines of the front panel On the edge between the front & the roof are located the reset switch & the LED controls which are positioned in the groove between the roof & the upper air inlet in the front Located in the middle in the front of the lid lies the RGB-LED backlit power button while both audio connections & the USB (Universal Serial Bus) 30 ports of the front panel are positioned on the side to the right The majority of the roof is taken up by a large removable dust filter that has the appearance of a large mesh grid on a large grill MEDIUM CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the interior of the anthracite-coloured Eclipse P400 looks premium thanks to the black paintwork & is divided in two via a PSU shroud with ventilation holes in the top This way the PSU shroud also covers both drive bays which are rotated 90&176; & made for tool-free mounting of two 25 or 35 drives via the right side after removing the thumb screws Behind the motherboard tray users can install up to two SSDs in the Drop-N-Lock SSD brackets & for cable management there is 25 mm of space reserved Hook & loop fastener cable guides enable users to enjoy the cleanest & tidiest system possible & the rubberised passthroughs in the tray also help keep the messy cabling down to a minimum For casual & hardcore gamers alike the PHANTEKS Eclipse P400 offers extensive build options when it comes to high-end gamer hardware in the form of graphics cards up to 395 mm in length & radiator mountings for Ai O- & custom watercooling Moreover the case offers the option of installing a 120 mm fan in the rear or correspondingly sized radiator while the front holds up to three 120 mmor two 140 mm fans As an alternative to the front fans 280- or 360 radiators can be installed in the front When it comes to installing 360 mm radiators a cover in the PSU shroud along with the HDD cages need to be removed Apart from the pre-installed 120 mm fans one of which is situated in the front & one in the back up to two 120 mm or 140 mm case fans can be mounted in the roof Those wishing to utilise a standard style CPU cooler on their processor are able to choose models that are up to 16 cm in height while a power supply up to 270 mm in length can be used to power the gaming system The LED lighting is powered via a SATA cable with 12 Volts & a 4-pin connector enables the case's LED lighting to be connected to a motherboard with a compatible RGB connector With the aid of accessories (available separately) users can trade a few millimetres of the max length of their graphics card & the option of a radiator in the front to have up to four additional 35- or 25 storage devices Furthermore the case is compatible with ASUS Aura or MSI Mystic Light meaning that the motherboard's lighting can be controlled to synchronise with the case's lighting meaning that your entire gaming PC is able to be beautifully illuminated with the same LED effects Technical Details Dimensions 210 x 465 x 470 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Anthracite Form factor E-ATX (up to 272 mm wide) ATX Micro-ATX Mini-ITXTotal possible fans 2x 140 3x 120 mm (front)2x 140 120 mm (roof)1x 120 mm (rear) Pre-installed 1x 120 mm (front)1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 280360 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive Bays 2x 25 (behind motherboard tray)2x 2535 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button (with RGB-LED)1x LED controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU length 395 mm Maximum CPU cooler height 160 mm Maximum PSU length 270 mm ...