Noble look & spacious interior The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior Beneath the tempered glass side the Midi-Tower is decorated with an addressable RGB-LED strip Its colours shine out from behind an opaque acrylic glass strip The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs The lighting can be controlled via a switch on the IO panel or by compatible addressable RGB motherboards using the 3-Pin connector provided Furthermore the spacious interior is more than capable of supporting lot of powerful hardware A fine mesh with integrated dust filter on the top is also provided ensuring your components are supplied with fresh air as well as kept dust-free A STYLISH HIGH-END CASE FROM KOLINK THE BASTIONStylish Midi-Tower for motherboards up to E-ATX format Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long CPU cooler up to 160 mm tall IO panel with control for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20 Support for up to 280mm radiators on the top panel THE KOLINK BASTION A SPACIOUS CASE FOR GAMING HARDWAREEven if the outer

Dimensions correspond to a Midi-Tower format the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design With 370 mm space up to the front there is also enough room for even the longest graphics cards In terms of vertical space users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare A cover conceals the power supply unit & the HDD cage in which two 35-inch or two 25-inch drives can be installed Two 25-inch SSDs can be attached to the rear of the motherboard Those who rely on air cooling will appreciate the number of slots for 120 mm fans Two 120 mm fans can be mounted on the power supply cover while a removable air filter under the power supply ensures a dust-free supply of fresh air The top of the case is fitted with a mesh through which air can flow with a minimum of resistance Here too a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary A powerful 120 mm fan already occupies the available slot at the rear The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting Of course compatible radiators can be installed instead of fans TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case Instead of boring squares & rectangles the recess behind the motherboard has an original shape to it Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides The end result of your cable management efforts can then be admired through a tempered glass side door which can also be lifted out at the hinges when needed A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover An acrylic frosted glass cover helps light diffuse evenly A switch on the IO panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura &38; MSI Mystic Light Sync The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG) Both can be connected to the two connectors of the controller on the IO panel A 3-pin connector is also available on the fan to which further RGB components can be connected Alternatively strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly This then allows the RGB switch on the IO panel to be used as a reset button In addition to the RGBReset switch there are one USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 connections as well as a 35 millimetre jack for headphones & microphones alongside a power LED & an HDD LED Technical Details Dimensions (W x H x D) 432 x 205 x 490 mm Material Steel tempered glass plastic Weight approx 59kg Color Black Form Factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (cover)2x 120 mm (power supply cover)1x 120 mm (rear) Pre-installed 1x 120 mm Rear side Radiator mountings 1x 240280 mm (cover)1x 240 mm (power supply cover)1x 120 mm (rear) Filter Cover

...

Noble look & spacious interior The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior Beneath the tempered glass side the Midi-Tower is decorated with an addressable RGB-LED strip Its colours shine out from behind an opaque acrylic glass strip The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs The lighting can be controlled via a switch on the IO panel or by compatible addressable RGB motherboards using the 3-Pin connector provided Furthermore the spacious interior is more than capable of supporting lot of powerful hardware A fine mesh with integrated dust filter on the top is also provided ensuring your components are supplied with fresh air as well as kept dust-free A STYLISH HIGH-END CASE FROM KOLINK THE BASTIONStylish Midi-Tower in White for motherboards up to E-ATX format White Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long CPU cooler up to 160 mm tall IO panel with control for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20 Support for up to 280mm radiators on the top panel THE KOLINK BASTION A SPACIOUS CASE FOR GAMING HARDWAREEven if the outer

Dimensions correspond to a Midi-Tower format the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design With 370 mm space up to the front there is also enough room for even the longest graphics cards In terms of vertical space users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare A cover conceals the power supply unit & the HDD cage in which two 35-inch or two 25-inch drives can be installed Two 25-inch SSDs can be attached to the rear of the motherboard Those who rely on air cooling will appreciate the number of slots for 120 mm fans Two 120 mm fans can be mounted on the power supply cover while a removable air filter under the power supply ensures a dust-free supply of fresh air The top of the case is fitted with a mesh through which air can flow with a minimum of resistance Here too a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary A powerful 120 mm fan already occupies the available slot at the rear The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting Of course compatible radiators can be installed instead of fans TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case Instead of boring squares & rectangles the recess behind the motherboard has an original shape to it Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides The end result of your cable management efforts can then be admired through a tempered glass side door which can also be lifted out at the hinges when needed A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover An acrylic frosted glass cover helps light diffuse evenly A switch on the IO panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura &38; MSI Mystic Light Sync The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG) Both can be connected to the two connectors of the controller on the IO panel A 3-pin connector is also available on the fan to which further RGB components can be connected Alternatively strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly This then allows the RGB switch on the IO panel to be used as a reset button In addition to the RGBReset switch there are one USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 connections as well as a 35 millimetre jack for headphones & microphones alongside a power LED & an HDD LEDTechnical Details Dimensions (W x H x D) 432 x 205 x 490 mm Material Steel tempered glass plastic Weight approx 59kg Colour White Form Factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (cover)2x 120 mm (power supply cover)1x 120 mm (rear) Pre-installed 1x 120 mm Rear side Radiator mountings 1x 240280 mm (cover)1x 240 mm (power supply cover)1x 120 mm (rear) Filter Cover

...

The C19 International IEC to UK mains cable is commonly used forpowering high current IT appliances such as PSUs PDUs & some highpowered servers & workstations The PVC connectors are moulded to provide a high quality cable which isperfect for office use & server room use UK to C19 International IEC18 Mtrs Moulded 13A Fuse on UK plug 16A C19 Connector HO5VV-F 3G15mm&178; ...

With its minimalist exterior spacious interior & tempered glass side door the Castle Midi-Tower from Kolink certainly leaves a lasting impression The reserved exterior goes a long way to making the hardware you do choose to install look its very best Designed for excellent airflow the case supports motherboards up to ATX in form factor along with graphics cards up to 350 mm long
- enough space for the powerful gaming hardware you need Despite the robust tempered glass side the Kolink Castle still only weighs in at just 51kg & because the side is easy to open the Castle is perfect for people who appreciate having quick & easy access to the innards of their PC when it comes to tweaks & upgrades THE FEATURES OF THE KOLINK CASTLE MIDI-TOWER AT A GLANCEAscetic minimalist design in black that supports motherboards up to ATXHinged Tempered Glass Side Door
- 4mm thick 2x Pre-installed 120 mm fans 6 possible in total IO Panel with 2x USB (Universal Serial Bus) 20 1x USB (Universal Serial Bus) 30 &38; HD Audio In Out LEDs for power & HDDSupport for radiators up to 240 mm in front & in roof 2x 3525 Drive slots 4x slots for 25 drives Graphics cards up to 35 cm long &38; CPU coolers 16 cm high supported TEMPERED GLASS SIDE &38; TWO PRE-INSTALLED FANSThe robust chassis consists of 1 mm thick SECC steel & is equipped with a 4-mm-thick tempered glass side door with a plastic brushed aluminium look front The whole interior is coated in black & also

Includes:: a PSU shroud to help give the system an exceptionally clean aesthetic Beneath this you will find a pre-installed drive cage with brackets for three 35- or 25 drives that leaves plenty of space for the power supply On the PSU shroud as in front of the motherboard tray there are a total of four slots for 25 drives In order to keep your gaming hardware kept well-supplied with fresh air two of six possible 120 mm fans both in black come included with the case One is located in the bottom of three total slots located behind the front panel the second is located in the single slot at the back The roof of the case supports two further 120 mm fans if required The front of the case also supports two 140 mm fans DUST FILTERS KEEP THE KOLINK CASTLE CLEANThe motherboard tray & the PSU cover offer multiple openings for excellent cable management options A 240 mm radiator can fit in the roof & the front of the Castle case With fine-mesh dust filters installed on the air inlets in the roof & on the bottoms of the case users will appreciate the extra degree of dust protection this allows These dust filters have a honeycomb design & are magnetic adding to the overall convenience Graphics cards up to 35 cm long are supported as well as CPU coolers up to 16 cm in height in addition the IO panel on the front

Includes:: in addition to two USB (Universal Serial Bus) 20 ports a single USB (Universal Serial Bus) 30 Type-A port A cut-out for a switch to control the RGB lighting is available this however does not come included with the case & is available for purchase separately Power & drive access LEDs are included Technical Details Dimensions 201 x 405 x 435 mm (W x H x D) Material Steel tempered glass plastic Weight approx 51kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal possible fans 3x 120 mm 2x 140 mm (Front)2x 120 mm (roof)1x 120 mm (rear) Pre-installed 1x 120 mm (Front 3-Pin)1x 120 mm (Rear 3-Pin) Radiator Mountings 1x 240 mm (Front)1x 240 mm (Roof) Filter Roof bottom Drive Bays 2x 3525 (internal)2x 25 (internal PSU shroud)2x 25 (internal front of motherboard tray PSU 1x Standard ATX up to 180 mm (optional) Expansion slots 7IO Panel 2x USB (Universal Serial Bus) 20 (internal connection)1x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out 1x LED Power 1x LED HDDMax GPU length 350 mm Max CPU cooler height 160 mm Max PSU length 180 mm





...

The design is able to accommodate monitors weighing up to 12kg per arm with a screen size of up to 36 inches Thanks to the integrated cable management on the back additional tangles on the desk are discreetly & effectively avoided The entire construction is fastened with a table mounting bracket The table tops can be up to 100 mm thick Features Precise alignment for a visually impressive screen ensemble In order to be able to optimally arrange & adjust the installed monitors according to their size the mounting brackets to which the individual flat screens are attached can be flexibly moved horizontally & locked in the desired position The arms can also be adjusted in height from a minimum of 200 mm to a maximum of 400 mm The installed monitors can be swiveled 15 degrees to the right & left tilted from -85 degrees to 15 degrees & rotated by 180 degrees In this way the monitor setup can be individually configured & perfectly adapted to the respective requirements The screens can be installed according to VESA 75 x 75 or VESA 100 x 100 standard Specification Material aluminum steel plastic Color Black Mounting system VESAVESA standard 75 x 75 mm 100 x 100 mm Monitor compatibility 2x to 36 inches max 12kg per display Height adjustment yes (200 to 400 mm) Vertical rotation (pivot) yes (180 degrees) Horizontal rotation (swivel) yes (- 15 degrees) Tilt angle yes (-85 degrees to -15 degrees) Cable management yes Weight approx 47kg ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers In addition the extremely quiet 120mm fan with a fined-tuned RPM curve has been optimized for airflow This makes the Classic Power the quietest power supply of its kind The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system THE KOLINK CLASSIC POWER 400W POWER SUPPLY AT A GLANCE348W & 29A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors 1x 24-pin 1x 44-pin 1x PCIe 62-pin 3x SATA 2x Molex KOLINK CLASSIC POWER FULL PERFORMANCE & HIGH EFFICIENCYThe 400 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment The PSU delivers up to 348W & 29A on the 12V rail while providing 80W & 15A each on the 33V & 5V rails This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 858282 percent at 5020100 percent load (at 230 Volt input voltage) The PSU's highly efficient circuit design features independent DC-to-DC converters for the 33V & 5V outputs ensuring extremely precise voltage regulation Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve Thanks to the optimized airflow the fan & thus the entire PSU remain quiet as a whisper Besides the 204 pin for the motherboard the Kolink Classic Power has a 44 pin connector for the CPU & a 62 PCIe pin connector for dedicated graphics cards Three SATA & two Molex connectors are available for additional components The flat flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup Note For environmental reasons the manufacturer does not supply a power cord for connection to the mains Technical Details Dimensions 150 x 86 x 160 mm (W x H x D) Fan 120 mm (automatic control) Colour Black (power supply fan) Efficiency minimum 858282 percent at 5020100 percent load Fulfils requirements for 80 PLUS Bronze certification Active PFCForm Factor ATX12V 24EPS12V 292 Performance 400 W33V 15 A5V 15 A33V &38; 5V combined 80 W12V 348 W 29 A-12V 3 W 03 A5 Vsb 125 W 25 AConnectors Motherboard 1x 204-Pin ATX12VEPS12V (500 mm)CPU 1x 44-Pin ATX12VEPS12V (600 mm)1x 62-Pin PCIe (600 mm)3x SATA (500 100 100 mm)2x 4-Pin Molex (500 100 mm) Protective Circuits OVPUVP (Over- & undervoltage protection)SCP (short circuit) OPP (overload) OCP (overcurrent on rails 12 33 & 5 Volt) Manufacturer's guarantee 3 Years ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers In addition the extremely quiet 120mm fan with a fined-tuned RPM curve has been optimized for airflow This makes the Classic Power the quietest power supply of its kind The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system THE KOLINK CLASSIC POWER 500W POWER SUPPLY AT A GLANCE444W & 37A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors 1x 24-pin 1x 44-pin 2x 62-pin 4x SATA 2x Molex KOLINK CLASSIC POWER FULL PERFORMANCE & HIGH EFFICIENCYThe 500 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment The PSU delivers up to 444W & 37A on the 12V rail while providing 100W & 15A each on the 33V & 5V rails This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 858282 percent at 5020100 percent load (at 230 Volt input voltage) The PSU's highly efficient circuit design features independent DC-to-DC converters for the 33V & 5V outputs ensuring extremely precise voltage regulation Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve Thanks to the optimized airflow the fan & thus the entire PSU remain quiet as a whisper Besides the 204 pin for the motherboard the Kolink Classic Power has a 44 pin connector for the CPU & two 62 pin connectors for dedicated graphics cards Four SATA & two Molex connectors are available for additional components The flat flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup Note For environmental reasons the manufacturer does not supply a power cord for connection to the mains Technical Details Dimensions 150 x 86 x 160 mm (W x H x D) Fan 120 mm (automatic control) Colour Black (power supply fan) Efficiency minimum 858282 percent at 5020100 percent load Fulfils requirements for 80 PLUS Bronze certification Active PFCForm Factor ATX12V 24EPS12V 292 Performance 500 W33V 15 A5V 15 A33V &38; 5V combined 100 W12V 444 W 37 A-12V 3 W 03 A5 Vsb 125 W 25 AConnectors Motherboard 1x 204-Pin ATX12VEPS12V (500 mm)CPU 1x 44-Pin ATX12VEPS12V (600 mm)2x 62-Pin PCIe (600 100 mm)4x SATA (500 100 100 100 mm)2x 4-Pin Molex (500 100 mm) Protective Circuits OVPUVP (Over- & undervoltage protection)SCP (short circuit) OPP (overload) OCP (overcurrent on rails 12 33 & 5 Volt) Manufacturer's guarantee 3 Years ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers In addition the extremely quiet 120mm fan with a fined-tuned RPM curve has been optimized for airflow This makes the Classic Power the quietest power supply of its kind The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system THE KOLINK CLASSIC POWER 600W POWER SUPPLY AT A GLANCE546W & 455A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors 1x 24-pin 1x 44-pin 2x 62-pin 4x SATA 2x Molex KOLINK CLASSIC POWER FULL PERFORMANCE & HIGH EFFICIENCYThe 600 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment The PSU delivers up to 546W & 455A on the 12V rail while providing 100W & 15A each on the 33V & 5V rails This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 858282 percent at 5020100 percent load (at 230 Volt input voltage) The PSU's highly efficient circuit design features independent DC-to-DC converters for the 33V & 5V outputs ensuring extremely precise voltage regulation Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve Thanks to the optimized airflow the fan & thus the entire PSU remain quiet as a whisper Besides the 204 pin for the motherboard the Kolink Classic Power has a 44 pin connector for the CPU & two 62 pin connectors for dedicated graphics cards Four SATA & two Molex connectors are available for additional components The flat flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup Note For environmental reasons the manufacturer does not supply a power cord for connection to the mains Technical Details Dimensions 150 x 86 x 160 mm (W x H x D) Fan 120 mm (automatic control) Colour Black (power supply fan) Efficiency minimum 858282 percent at 5020100 percent load Fulfils requirements for 80 PLUS Bronze certification Active PFCForm Factor ATX12V 24EPS12V 292 Performance 600 W33V 15 A5V 15 A33V &38; 5V combined 100 W12V 546 W 455 A-12V 3 W 03 A5 Vsb 125 W 25 AConnectors Motherboard 1x 204-Pin ATX12VEPS12V (500 mm)CPU 1x 44-Pin ATX12VEPS12V (600 mm)2x 62-Pin PCIe (600 100 mm)4x SATA (500 100 100 100 mm)2x 4-Pin Molex (500 100 mm) Protective Circuits OVPUVP (Over- & undervoltage protection)SCP (short circuit) OPP (overload) OCP (overcurrent on rails 12 33 & 5 Volt) Manufacturer's guarantee 3 Years ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers In addition the extremely quiet 120mm fan with a fined-tuned RPM curve has been optimized for airflow This makes the Classic Power the quietest power supply of its kind The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system THE KOLINK CLASSIC POWER 700W POWER SUPPLY AT A GLANCE648W & 54A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors 1x 24-pin 1x 44-pin 4x 62-pin 6x SATA &38; 2x Molex KOLINK CLASSIC POWER FULL PERFORMANCE & HIGH EFFICIENCYThe 700 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment The PSU delivers up to 648W & 54A on the 12V rail while providing 110W & 15A each on the 33V & 5V rails This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 858282 percent at 5020100 percent load (at 230 Volt input voltage) The PSU's highly efficient circuit design features independent DC-to-DC converters for the 33V & 5V outputs ensuring extremely precise voltage regulation Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve Thanks to the optimized airflow the fan & thus the entire PSU remain quiet as a whisper Besides the 204 pin for the motherboard the Kolink Classic Power has a 44 pin connector for the CPU & four 62 pin connectors for dedicated graphics cards Six SATA & two Molex connectors are available for additional components The flat flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup Note For environmental reasons the manufacturer does not supply a power cord for connection to the mains Technical Details Dimensions 150 x 86 x 160 mm (W x H x D) Fan 120 mm (automatic control) Colour Black (power supply fan) Efficiency minimum 858282 percent at 5020100 percent load Fulfils requirements for 80 PLUS Bronze certification Active PFCForm Factor ATX12V 24EPS12V 292 Performance 700 W33V 15 A5V 15 A33V &38; 5V combined 110 W12V 648 W 54 A-12V 3 W 03 A5 Vsb 125 W 25 AConnectors Motherboard 1x 204-Pin ATX12VEPS12V (500 mm)CPU 1x 44-Pin ATX12VEPS12V (600 mm)4x 62-Pin PCIe (600 100 mm)6x SATA &38; 2x Molex (500 100 100 100 mm) Protective Circuits OVPUVP (Over- & undervoltage protection)SCP (short circuit) OPP (overload) OCP (overcurrent on rails 12 33 & 5 Volt) Manufacturer's guarantee 3 Years ...

In addition to a variety of value-oriented cases & an extensive selection of accessories the Hungarian manufacturer Kolink ...