The Kolink external 25-inch drive enclosure provides a mobile home for both mechanical hard drives & flash-based SSDs up to 9mm in height The black external case is made from brushed aluminum & therefore fells & looks of high quality The installation of a hard drive in the Kolink housing is very simple by hand & only requires a screwdriver which is included with the delivery The integrated SATA interface supports the proven SATA 3G standard whose realistic achievable bandwidth is a maximum of 300 MB s (3 Gbit s) which is more than adequate for conventional hard drives The enclosure supports volumes up to 3TB in capacity Although even the fastest notebook HDDs can only achieve just over 120 MB s as the transfer rate they are slowed down considerably by the classic USB (Universal Serial Bus) 20 standard so that Kolink&s external housing here relies on a current USB (Universal Serial Bus) 30 port with a theoretical data rate of 640 MB s (5 Gbit s) familiar This even high-performance solid-state drives can perform a high performance that trumps any hard drive The connection between the external drive & a PC laptop or other device via a corresponding USB (Universal Serial Bus) 30 cable from Micro-USB (Universal Serial Bus)-to-USB which is also supplied with a black leather case Thanks to the small size the simple but elegant style the external Kolink housing is a practical companion that you are always happy to present anywhere whether on a business trip on vacation or at LAN parties Technical Details- Material Aluminum- Colour Black- Drive (optional) 1x 25-inch SSD HDD- Maximum height 9 mm- Maximum capacity 3 TB- Supported standard SATA 3G- Connection USB (Universal Serial Bus) 30- Accessories USB (Universal Serial Bus) 30 cable screwdriver protective cover- Compatibility Windows 10 8 7 Vista XP; Mac OS X V105 or higher ...

Extend the range of any fan inside the enclosure with the extension cable extension provided here The cable extends the signal path by more than 30 cm It is compatible with 4-pin PWM fans so it passes the pulse width modulation signal from the motherboard to the fan In addition you can also plug in normal 3-pin fans which then run unregulated Technical details Length 300 mm Color Black Connections 1x 4-pin PWM fan connector 1x 4-pin PWM fan connector ...

Extend the range of any fan inside the enclosure with the extension cable extension provided here The cable extends the signal path by more than 30 cm It is compatible with 4-pin PWM fans so it passes the pulse width modulation signal from the motherboard to the fan In addition you can also plug in normal 3-pin fans which then run unregulated Technical details Length 600 mm Color Black Connections 1x 4-pin PWM fan connector 1x 4-pin PWM fanconnector ...

Prepared for the next heat wave The strong Aero USB (Universal Serial Bus) Desk Fan by Kolink provides cooling exactly where it is most needed The fight to keep cool is no longer a losing battle when you have the Kolink Aero placed anywhere on your desk Turn the ventilation grille so that the air flow is directed exactly where it should & you will be kept nice & cool at all times The features of the Aero USB (Universal Serial Bus) Desk Fan from Kolink at a glance- Portable USB (Universal Serial Bus) desktop fan- Powered by 12 meter USB (Universal Serial Bus) cable- Rotatable ventilation grille for optimally placed airflow- Brushless motor with three speed levels- Compact

Dimensions of 125 x 57 x 135 mm Optimal cooling thanks to powerful motor The powerful & quiet brushless DC motor ensures a powerful airflow In addition the rotational speed can be set in three steps of 2400 2800 & 3200 rpm About a 12 meter long USB (Universal Serial Bus) cable with type A plug the required 08 A & a maximum of 4 watts are supplied This allows the fan made from high-quality ABS & polypropylene can also be connected to a conventional smartphone power supply The Aero USB (Universal Serial Bus) Desk Fan from Kolink is not only suitable for home use but also for use at LAN parties or e Sports events because well-cooled is half the battle Technical specifications-

Dimensions (W x H x D) 125 x 57 x 13.5cm- Material ABS polypropylene- Colour Dark blue Motor- Type brushless- Speed 2400 2800 3200 rpm- Voltage 5 V- Current max 08 A- Power consumption 4 W- Connection USB (Universal Serial Bus) Type A (USB 11 20 30 31)- Cable length 12 m



...

Standard &kettlle plug& cable for ATX power supplies & monitors
- fitted with a moulded & fused plug & with 12 meters of cord While
...

With it's aggressive gaming design the Kolink Aviator is an excellent example of a gaming case that is packed full of features without the hefty pricetag The Black Aviator comes with a premium Glossy finish & 3 pre-installed fans 2 of which are Red LED The Aviator comes with support for up to 370mm VGA cards 170mm CPU Coolers & 240mm Radiators on the top or front panel Furthermore the Aviator comes with 2 x USB30 ports at standard an TFSD Card Reader & a fan controller for excellent user interface options The Kolink Aviator is an excellent Midi Tower gaming chassis & represents outstanding value for your money within the gaming range FEATURES- 2 x Front USB (Universal Serial Bus) 30 with audio jacks- Extruded right side panel for cable management &38; better airflow
- Large hexagonal mesh on front & top for good airflow
- Equipped with a stylish pedestal that lifts your chassis & improves airflow
- Bottom PSU placement
- Tool free SSD HDD side installation
- TFSD card reader ready for quick access to multimedia
- Tinted transparent ABS window for full view of interior
- Dual radiator water cooler compatible (top & front)SPECIFICATIONS- Model Aviator Black- Type Midi Tower Case- Colour Black with glossy front panel finish- Case Material 05mm Steel Plastic- Power Supply Orientation Bottom- Motherboard Support ATXMicro-ATXMini-ITX- External 525 Bays 2- External 35 Bays 1- Internal 35 Bays 2- Internal 25 Bays 1- Expansion Slots 7- Front Ports 2 x USB30 (with USB20 convertor) 1 x USB20 HD-Audio x 1 Mic x 1 SD Card Reader Fan Controller- Cooling System Front
- 2 x 120mm Fan (included Red LED) Rear
- 1 x 120mm (included) Top
- 2 x 120mm (optional)-

Dimensions 400 x 211 x 480mm- Box

Dimensions 578 x 263 x 538- Clearance VGA
- 370mm CPU Cooler
- 170mm















...

With it's aggressive gaming design the Kolink Aviator is an excellent example of a gaming case that is packed full of features without the hefty pricetag The Gunmetal Aviator comes with a premium matte finish & 3 pre-installed fans 2 of which are Blue LED The Aviator comes with support for up to 370mm VGA cards 170mm CPU Coolers & 240mm Radiators on the top or front panel Furthermore the Aviator comes with 2 x USB30 ports at standard an TFSD Card Reader & a fan controller for excellent user interface options The Kolink Aviator is an excellent Midi Tower gaming chassis & represents outstanding value for your money within the gaming range FEATURES- 2 x Front USB (Universal Serial Bus) 30 with audio jacks- Extruded right side panel for cable management &38; better airflow
- Large hexagonal mesh on front & top for good airflow
- Equipped with a stylish pedestal that lifts your chassis & improves airflow
- Bottom PSU placement
- Tool free SSD HDD side installation
- TFSD card reader ready for quick access to multimedia
- Tinted transparent ABS window for full view of interior
- Dual radiator water cooler compatible (top & front)SPECIFICATIONS- Model Aviator Gunmetal- Type Midi Tower Case- Colour Gunmetal with matte front panel finish- Case Material 05mm Steel Plastic- Power Supply Orientation Bottom- Motherboard Support ATXMicro-ATXMini-ITX- External 525 Bays 2- External 35 Bays 1- Internal 35 Bays 2- Internal 25 Bays 1- Expansion Slots 7- Front Ports 2 x USB30 (with USB20 convertor) 1 x USB20 HD-Audio x 1 Mic x 1 SD Card Reader Fan Controller- Cooling System Front
- 2 x 120mm Fan (included Blue LED) Rear
- 1 x 120mm (included) Top
- 2 x 120mm (optional)-

Dimensions 400 x 211 x 480mm- Box

Dimensions 578 x 263 x 538- Clearance VGA
- 370mm CPU Cooler
- 170mm















...

Renowned for their innovative & high-performance contributions to the world of PC cases Kolink has created the Balance Midi-Tower as a feature-rich gaming case This case may have a stunning exterior but behind this facade lies a lot of space for powerful gaming hardware aswell All this gaming goodness can be admired through the tempered glass side panel & as it supports motherboards up to E-ATX in form factor there will be plenty to look at A thoughtfully included PSU shroud also helps users stash away unsightly cables The front of the case with its fine mesh & air vents helps ensure not only good airflow it also helps accentuate the digitally addressable RGB-LED strip & the look of the case as a whole A switch on the IO panel allows the lighting to be controlled Alternatively the strip can be connected directly to the motherboard & controlled that way instead The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top A pre-installed 120 mm fan is also equipped with d ARGB lighting THE FEATURES OF THE KOLINK BALANCE MIDI-TOWER AT A GLANCEStylish Midi-Tower for motherboards up to E-ATX format Tempered glass side panel for an unobstructed view of the interior Front with fine-mesh ventilation grille Attractive d ARGB lighting on the front A pre-installed 120 mm fan with d ARGB lighting at the rear Up to five 120 mm- & four 140 mm fans possible in total Space for graphics cards up to 370 mm tall CPU coolers up to 162 mm IO Panel with controller for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20KOLINK BALANCE PLENTY OF SPACE FOR POWERFUL GAMING HARDWAREEven though the outer

Dimensions of the case are those of a Midi-Tower the Balance uses its clever design in such a way as to make space for even an E-ATX board if necessary Graphics cards up to 370 mm in length will fit comfortably & even tall CPU coolers up to 162 mm in height will fit One of the highlights of the case is the fact that GPUs can be mounted vertically using a PCI-E riser cable (sold separately)
- meaning that users are really free to make their system stand out from the crowd A PSU shroud conceals the power supply & the HDD cage where two 35- or two 25 drives can be installed Two more 25 SSDs can be installed to the rear of the motherboard As for those who prefer to opt for air cooling there are more than enough slots for 120 mm fans The front allows for three 120 mm- or two 140 mm fans to be installed The roof supports either two 120 mm or two 140 mm fans The cover is equipped with a mesh that allows the system to benefit from a plentiful supply of fresh air
- & this is combined with a dust filter to ensure the interior doesn't need frequent cleaning either The rear of the case supports a high-performance 120 mm fan a 360 mm or 280 mm radiator can be installed in the front & a further 280 mm radiator can be installed in the roof if needed The pre-installed 120 mm fan can be replaced with an identically-sized radiator TEMPERED GLASS & RGB-LEDS SHOWCASE YOUR SYSTEMThanks to the clever locations of the cable guides & brackets users will enjoy the various benefits of smart cable management All the more important as so much of the case is on show thanks to the use of a tempered glass side panel In the centre of the front of the case users will find a strip with d ARGB-LEDs These LEDs & their effects can be controlled via a switch situated on the IO panel Alternatively the strip can be connected directly to a compatible ARGB motherboard & controlled that way instead Aside from the RGB button there are also power- & reset buttons alongside a USB (Universal Serial Bus) 30 port two USB (Universal Serial Bus) 20 ports Power HDD-LEDs & a 3.5cm jack for headphones & microphones Technical Details Dimensions (H x W x D) 425 x 210 x 470 mm Material Steel tempered glass plastic Weight approx 62kg Colour black Form factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (cover)3x 120 or 2x 140 mm (front)1x 120 mm (back) Pre-installed 1x 120 mm ARGB rear side Radiator Mounts 1x 360280 mm (front)1x 240280 mm (cover)1x 120 mm (back) Filter cover bottom front Drive bays 2x 3525 inch (internal HDD cage)2x 25 inch (internal mainboard tray) Power supply 1x standard ATX (optional) Expansion slots 7GPU Mounting orientation Vertical (dual slot riser cable sold separately) or horizontal IO panel 1x USB (Universal Serial Bus) 30 type A (internal connection)2x USB (Universal Serial Bus) 20 (internal connection)1x audio inout 1x RGB switch Maximum graphics card length 370 mm Maximum CPU cooler height 162 mm



...

Noble look & spacious interior The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior Beneath the tempered glass side the Midi-Tower is decorated with an addressable RGB-LED strip Its colours shine out from behind an opaque acrylic glass strip The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs The lighting can be controlled via a switch on the IO panel or by compatible addressable RGB motherboards using the 3-Pin connector provided Furthermore the spacious interior is more than capable of supporting lot of powerful hardware A fine mesh with integrated dust filter on the top is also provided ensuring your components are supplied with fresh air as well as kept dust-free A STYLISH HIGH-END CASE FROM KOLINK THE BASTIONStylish Midi-Tower for motherboards up to E-ATX format Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long CPU cooler up to 160 mm tall IO panel with control for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20 Support for up to 280mm radiators on the top panel THE KOLINK BASTION A SPACIOUS CASE FOR GAMING HARDWAREEven if the outer

Dimensions correspond to a Midi-Tower format the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design With 370 mm space up to the front there is also enough room for even the longest graphics cards In terms of vertical space users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare A cover conceals the power supply unit & the HDD cage in which two 35-inch or two 25-inch drives can be installed Two 25-inch SSDs can be attached to the rear of the motherboard Those who rely on air cooling will appreciate the number of slots for 120 mm fans Two 120 mm fans can be mounted on the power supply cover while a removable air filter under the power supply ensures a dust-free supply of fresh air The top of the case is fitted with a mesh through which air can flow with a minimum of resistance Here too a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary A powerful 120 mm fan already occupies the available slot at the rear The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting Of course compatible radiators can be installed instead of fans TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case Instead of boring squares & rectangles the recess behind the motherboard has an original shape to it Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides The end result of your cable management efforts can then be admired through a tempered glass side door which can also be lifted out at the hinges when needed A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover An acrylic frosted glass cover helps light diffuse evenly A switch on the IO panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura &38; MSI Mystic Light Sync The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG) Both can be connected to the two connectors of the controller on the IO panel A 3-pin connector is also available on the fan to which further RGB components can be connected Alternatively strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly This then allows the RGB switch on the IO panel to be used as a reset button In addition to the RGBReset switch there are one USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 connections as well as a 35 millimetre jack for headphones & microphones alongside a power LED & an HDD LED Technical Details Dimensions (W x H x D) 432 x 205 x 490 mm Material Steel tempered glass plastic Weight approx 59kg Color Black Form Factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (cover)2x 120 mm (power supply cover)1x 120 mm (rear) Pre-installed 1x 120 mm Rear side Radiator mountings 1x 240280 mm (cover)1x 240 mm (power supply cover)1x 120 mm (rear) Filter Cover

...

Noble look & spacious interior The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior Beneath the tempered glass side the Midi-Tower is decorated with an addressable RGB-LED strip Its colours shine out from behind an opaque acrylic glass strip The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs The lighting can be controlled via a switch on the IO panel or by compatible addressable RGB motherboards using the 3-Pin connector provided Furthermore the spacious interior is more than capable of supporting lot of powerful hardware A fine mesh with integrated dust filter on the top is also provided ensuring your components are supplied with fresh air as well as kept dust-free A STYLISH HIGH-END CASE FROM KOLINK THE BASTIONStylish Midi-Tower in White for motherboards up to E-ATX format White Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long CPU cooler up to 160 mm tall IO panel with control for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20 Support for up to 280mm radiators on the top panel THE KOLINK BASTION A SPACIOUS CASE FOR GAMING HARDWAREEven if the outer

Dimensions correspond to a Midi-Tower format the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design With 370 mm space up to the front there is also enough room for even the longest graphics cards In terms of vertical space users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare A cover conceals the power supply unit & the HDD cage in which two 35-inch or two 25-inch drives can be installed Two 25-inch SSDs can be attached to the rear of the motherboard Those who rely on air cooling will appreciate the number of slots for 120 mm fans Two 120 mm fans can be mounted on the power supply cover while a removable air filter under the power supply ensures a dust-free supply of fresh air The top of the case is fitted with a mesh through which air can flow with a minimum of resistance Here too a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary A powerful 120 mm fan already occupies the available slot at the rear The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting Of course compatible radiators can be installed instead of fans TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case Instead of boring squares & rectangles the recess behind the motherboard has an original shape to it Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides The end result of your cable management efforts can then be admired through a tempered glass side door which can also be lifted out at the hinges when needed A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover An acrylic frosted glass cover helps light diffuse evenly A switch on the IO panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura &38; MSI Mystic Light Sync The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG) Both can be connected to the two connectors of the controller on the IO panel A 3-pin connector is also available on the fan to which further RGB components can be connected Alternatively strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly This then allows the RGB switch on the IO panel to be used as a reset button In addition to the RGBReset switch there are one USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 connections as well as a 35 millimetre jack for headphones & microphones alongside a power LED & an HDD LEDTechnical Details Dimensions (W x H x D) 432 x 205 x 490 mm Material Steel tempered glass plastic Weight approx 59kg Colour White Form Factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (cover)2x 120 mm (power supply cover)1x 120 mm (rear) Pre-installed 1x 120 mm Rear side Radiator mountings 1x 240280 mm (cover)1x 240 mm (power supply cover)1x 120 mm (rear) Filter Cover

...